Package: freecad Version: 0.18+dfsg1-1 Severity: grave Justification: renders package unusable
Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** crete a new file create a ssketch ZY creates a vertical slot with radius 76 and the straight arm with a length of 76 Create 3 circles, the first one with a radius of 66 and the others with an equivalent restriction Create 3 circles, the first one with a radius of 66 and the others with an equivalent restriction The 3 circles will have a vertical distance between centers of 99 and a horizontal distance of 0. The distance between the top center of the slot and the center of the lower circumference will be 99 in vertical and 25 in horizontal. We create another slot with the curves and the straight lines with the same restriction as the first one. We create a restriction that leaves the lower center of the two slots with a vertical distance of 0. We create a constraint that separates the outer points of the two slots with a distance of 90. The sketcher is closed, and it is opened again. The crash has been triggered. the shell command ps -ef | grep -i Freec returns: perico 12407 12145 0 07:23 pts/2 00:00:00 sh -c /usr/bin/sensible-editor '/tmp/reportbug-freecad-20190406-12145-4oyoidcy' perico 12408 12407 0 07:23 pts/2 00:00:00 /bin/sh /usr/bin/sensible-editor /tmp/reportbug-freecad-20190406-12145-4oyoidcy perico 12416 12408 0 07:23 pts/2 00:00:00 /bin/nano /tmp/reportbug-freecad-20190406-12145-4oyoidcy *** End of the template - remove these template lines *** -- System Information: Debian Release: buster/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 4.19.0-4-amd64 (SMP w/8 CPU cores) Kernel taint flags: TAINT_PROPRIETARY_MODULE, TAINT_OOT_MODULE, TAINT_UNSIGNED_MODULE Locale: LANG=ca_ES.UTF-8, LC_CTYPE=ca_ES.UTF-8 (charmap=UTF-8), LANGUAGE= (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages freecad depends on: ii freecad-python3 0.18+dfsg1-1 Versions of packages freecad recommends: ii calculix-ccx 2.11-1+b3 ii graphviz 2.40.1-5+b2 Versions of packages freecad suggests: pn freecad-doc <none> ii povray 1:3.7.0.8-1 pn python-collada <none> -- no debconf information
