Package: src:linux
Version: 4.9.30-2+deb9u2
Severity: grave
Tags: ipv6
Justification: renders package unusable

Dear Maintainer,

I recently aquired this computer with clean hard drive attempted to install 
Stretch. Knowing that y USB WiFi adapter needed the ath9k firmware, I also 
downloaded the firmware-atheros_20161130-3_all.deb to emulate the process of 
getting Jessie to utilize the doggle on my other computer. After offline 
install and reboot, attempted to connect to network and received " 
[drm:i965_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun ". I then 
attempted a different network dongle, rt2870 chipset (firmware-misc-nonfree) 
and received same error.

I then tried install from NETINSTALL, and the device was registered and worked 
properly during install process. After reboot, again received the same error on 
both cards, individually inserted. I also attempted a reboot during the switch 
of the dongle.

In installing Jessie (8.5.0 amd4), I was able to make both cards work during 
normal operations, but upon upgrade using Aptitude, lost functionality.

Other Stretch live-OS derivitives are able to use dongle during normal 
operations.

Attempting to attach (partial) dmesg output.


-- Package-specific info:
** Version:
Linux version 4.9.0-3-amd64 (debian-ker...@lists.debian.org) (gcc version 6.3.0 
20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 (2017-06-26)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 
root=UUID=3443e0d8-0abf-4b5f-8c96-d5202ebe859e ro quiet

** Tainted: I (2048)
 * Working around severe firmware bug.

** Kernel log:
Unable to read kernel log; any relevant messages should be attached

** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex 380                 
product_version: 
chassis_vendor: Dell Inc.
chassis_version: 
bios_vendor: Dell Inc.
bios_version: A07
board_vendor: Dell Inc.
board_name: 0HN7XN
board_version: A01

** Loaded modules:
arc4
coretemp
kvm_intel
kvm
irqbypass
dell_wmi
sparse_keymap
iTCO_wdt
iTCO_vendor_support
ppdev
dell_smbios
joydev
evdev
dcdbas
snd_hda_codec_realtek
snd_hda_codec_generic
ath9k_htc
ath9k_common
ath9k_hw
pcspkr
lpc_ich
i915
snd_hda_intel
mfd_core
snd_hda_codec
snd_hda_core
snd_hwdep
snd_pcm
ath
mac80211
cfg80211
rfkill
snd_timer
serio_raw
snd
soundcore
rng_core
video
parport_pc
parport
drm_kms_helper
drm
sg
i2c_algo_bit
button
wmi
shpchp
acpi_cpufreq
sunrpc
ip_tables
x_tables
autofs4
ext4
crc16
jbd2
crc32c_generic
fscrypto
ecb
glue_helper
lrw
gf128mul
ablk_helper
cryptd
aes_x86_64
mbcache
hid_generic
usbhid
hid
sr_mod
cdrom
sd_mod
ata_generic
broadcom
bcm_phy_lib
ata_piix
psmouse
libata
scsi_mod
i2c_i801
i2c_smbus
tg3
ehci_pci
ptp
pps_core
libphy
uhci_hcd
ehci_hcd
usbcore
usb_common

** Network interface configuration:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default 
qlen 1000
    link/ether bc:30:5b:ac:fc:f6 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default 
qlen 1000
    link/ether 64:70:02:20:15:ba brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
  eth0:       0       0    0    0    0     0          0         0        0      
 0    0    0    0     0       0          0
 wlan0:       0       0    0    0    0     0          0         0        0      
 0    0    0    0     0       0          0
    lo:  337200    4164    0    0    0     0          0         0   337200    
4164    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    Forwarding: 2
    4162 total packets received
    0 forwarded
    0 incoming packets discarded
    4162 incoming packets delivered
    4162 requests sent out
    1040 outgoing packets dropped
    2 dropped because of missing route
Icmp:
    2080 ICMP messages received
    0 input ICMP message failed
    ICMP input histogram:
        destination unreachable: 2080
    2080 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 2080
IcmpMsg:
        InType3: 2080
        OutType3: 2080
Tcp:
    2 active connection openings
    0 passive connection openings
    2 failed connection attempts
    0 connection resets received
    0 connections established
    4 segments received
    4 segments sent out
    0 segments retransmitted
    0 bad segments received
    2 resets sent
Udp:
    0 packets received
    2080 packets to unknown port received
    0 packet receive errors
    2080 packets sent
    0 receive buffer errors
    0 send buffer errors
UdpLite:
TcpExt:
    0 packet headers predicted
IpExt:
    InOctets: 337060
    OutOctets: 337060
    InNoECTPkts: 4162


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller 
[8086:2e30] (rev 03)
    Subsystem: Dell 4 Series Chipset DRAM Controller [1028:0400]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root 
Port [8086:2e31] (rev 03) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 24
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Memory behind bridge: fe500000-fe5fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [88] Subsystem: Dell 4 Series Chipset PCI Express Root Port 
[1028:0400]
    Capabilities: [80] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee0300c  Data: 41a1
    Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE+
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
        LnkCap:    Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency 
L0s <256ns, L1 <4us
            ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- 
BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
            Slot #1, PowerLimit 75.000W; Interlock- NoCompl+
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
            Changed: MRL- PresDet- LinkState-
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
        RootCap: CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not 
Supported ARIFwd-
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF 
Disabled ARIFwd-
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- 
ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, 
EqualizationPhase1-
             EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
    Capabilities: [100 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status:    NegoPending+ InProgress-
    Capabilities: [140 v1] Root Complex Link
        Desc:    PortNumber=02 ComponentID=01 EltType=Config
        Link0:    Desc:    TargetPort=00 TargetComponent=01 AssocRCRB- 
LinkType=MemMapped LinkValid+
            Addr:    00000000feda5000
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset 
Integrated Graphics Controller [8086:2e32] (rev 03) (prog-if 00 [VGA 
controller])
    Subsystem: Dell 4 Series Chipset Integrated Graphics Controller [1028:0400]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 27
    Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
    Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    Region 4: I/O ports at ecd8 [size=8]
    [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
    Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee0200c  Data: 4172
    Capabilities: [d0] Power Management version 2
        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: i915
    Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset 
Integrated Graphics Controller [8086:2e33] (rev 03)
    Subsystem: Dell 4 Series Chipset Integrated Graphics Controller [1028:0400]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
    Capabilities: [d0] Power Management version 2
        Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition 
Audio Controller [8086:27d8] (rev 01)
    Subsystem: Dell NM10/ICH7 Family High Definition Audio Controller 
[1028:0400]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 26
    Region 0: Memory at fe6fc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee0200c  Data: 4162
    Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
    Capabilities: [100 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status:    NegoPending- InProgress-
        VC1:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=1 ArbSelect=Fixed TC/VC=80
            Status:    NegoPending- InProgress-
    Capabilities: [130 v1] Root Complex Link
        Desc:    PortNumber=0f ComponentID=02 EltType=Config
        Link0:    Desc:    TargetPort=00 TargetComponent=02 AssocRCRB- 
LinkType=MemMapped LinkValid+
            Addr:    00000000feda8000
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 
1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 25
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 00001000-00001fff
    Memory behind bridge: fe400000-fe4fffff
    Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag- RBE-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 128 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
        LnkCap:    Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s 
<256ns, L1 <4us
            ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ 
BWMgmt- ABWMgmt-
        SltCap:    AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
            Slot #4, PowerLimit 10.000W; Interlock- NoCompl-
        SltCtl:    Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
            Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
        SltSta:    Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
            Changed: MRL- PresDet+ LinkState+
        RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
        RootCap: CRSVisible-
        RootSta: PME ReqID 0000, PMEStatus- PMEPending-
    Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Address: fee0300c  Data: 41b1
    Capabilities: [90] Subsystem: Dell NM10/ICH7 Family PCI Express Port 1 
[1028:0400]
    Capabilities: [a0] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [100 v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed+ WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status:    NegoPending- InProgress-
        VC1:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable- ID=0 ArbSelect=Fixed TC/VC=00
            Status:    NegoPending- InProgress-
    Capabilities: [180 v1] Root Complex Link
        Desc:    PortNumber=01 ComponentID=02 EltType=Config
        Link0:    Desc:    TargetPort=00 TargetComponent=02 AssocRCRB- 
LinkType=MemMapped LinkValid+
            Addr:    00000000feda8001
    Kernel driver in use: pcieport
    Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
    Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:0400]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 21
    Region 4: I/O ports at ff80 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
    Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:0400]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin B routed to IRQ 22
    Region 4: I/O ports at ff60 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
    Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:0400]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 18
    Region 4: I/O ports at ff40 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
    Subsystem: Dell NM10/ICH7 Family USB UHCI Controller [1028:0400]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin D routed to IRQ 23
    Region 4: I/O ports at ff20 [size=32]
    Kernel driver in use: uhci_hcd
    Kernel modules: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI 
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
    Subsystem: Dell NM10/ICH7 Family USB2 EHCI Controller [1028:0400]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin A routed to IRQ 21
    Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [58] Debug port: BAR=1 offset=00a0
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
e1) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [50] Subsystem: Dell 82801 PCI Bridge [1028:0000]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC 
Interface Bridge [8086:27b8] (rev 01)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Capabilities: [e0] Vendor Specific Information: Len=0c <?>
    Kernel driver in use: lpc_ich
    Kernel modules: intel_rng, lpc_ich, leds_ss4200

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE 
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
    Subsystem: Dell 82801G (ICH7 Family) IDE Controller [1028:0400]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx+
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374
    Region 4: I/O ports at ffa0 [size=16]
    Kernel driver in use: ata_piix
    Kernel modules: ata_piix, ata_generic

00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA 
Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP 
PriO])
    Subsystem: Dell NM10/ICH7 Family SATA Controller [IDE mode] [1028:0400]
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0
    Interrupt: pin C routed to IRQ 20
    Region 0: I/O ports at fe00 [size=8]
    Region 1: I/O ports at fe10 [size=4]
    Region 2: I/O ports at fe20 [size=8]
    Region 3: I/O ports at fe30 [size=4]
    Region 4: I/O ports at fec0 [size=16]
    Capabilities: [70] Power Management version 2
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: ata_piix
    Kernel modules: ata_piix, ata_generic

00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller 
[8086:27da] (rev 01)
    Subsystem: Dell NM10/ICH7 Family SMBus Controller [1028:0400]
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Interrupt: pin B routed to IRQ 17
    Region 4: I/O ports at ece0 [size=32]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c_i801

02:00.0 Ethernet controller [0200]: Broadcom Limited NetLink BCM57780 Gigabit 
Ethernet PCIe [14e4:1692] (rev 01)
    Subsystem: Dell NetLink BCM57780 Gigabit Ethernet PCIe [1028:0400]
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at fe4f0000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [48] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
    Capabilities: [60] Vendor Specific Information: Len=6c <?>
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 00000000fee0300c  Data: 4122
    Capabilities: [cc] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 
unlimited
            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 
10.000W
        DevCtl:    Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
        LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency 
L0s <1us, L1 <32us
            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- CommClk+
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- 
BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not 
Supported
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF 
Disabled
        LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range, EnterModifiedCompliance- 
ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, 
EqualizationPhase1-
             EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
    Capabilities: [100 v1] Advanced Error Reporting
        UESta:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- 
MalfTLP- ECRC- UnsupReq- ACSViol-
        UEMsk:    DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- 
MalfTLP- ECRC- UnsupReq- ACSViol-
        UESvrt:    DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ 
MalfTLP+ ECRC- UnsupReq- ACSViol-
        CESta:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
        CEMsk:    RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
        AERCap:    First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
    Capabilities: [13c v1] Virtual Channel
        Caps:    LPEVC=0 RefClk=100ns PATEntryBits=1
        Arb:    Fixed- WRR32- WRR64- WRR128-
        Ctrl:    ArbSelect=Fixed
        Status:    InProgress-
        VC0:    Caps:    PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
            Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
            Ctrl:    Enable+ ID=0 ArbSelect=Fixed TC/VC=01
            Status:    NegoPending- InProgress-
    Capabilities: [160 v1] Device Serial Number bc-30-5b-ff-fe-ac-fc-f6
    Capabilities: [16c v1] Power Budgeting <?>
    Kernel driver in use: tg3
    Kernel modules: tg3


** USB devices:
Bus 005 Device 003: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n
Bus 005 Device 005: ID 0e8f:0022 GreenAsia Inc. multimedia keyboard controller
Bus 005 Device 004: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Bus 005 Device 002: ID 0409:0058 NEC Corp. HighSpeed Hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 9.1
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.9.0-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), 
LANGUAGE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.9.0-3-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.130
ii  kmod                                    23-2
ii  linux-base                              4.5

Versions of packages linux-image-4.9.0-3-amd64 recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2.3

Versions of packages linux-image-4.9.0-3-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta3-5
pn  linux-doc-4.9           <none>

Versions of packages linux-image-4.9.0-3-amd64 is related to:
pn  firmware-amd-graphics     <none>
ii  firmware-atheros          20161130-3
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
ii  firmware-ipw2x00          20161130-3
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
ii  firmware-misc-nonfree     20161130-3
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information

*** dmesg.txt
[    0.000000] Linux version 4.9.0-3-amd64 (debian-ker...@lists.debian.org) 
(gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-2+deb9u2 
(2017-06-26)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 
root=UUID=3443e0d8-0abf-4b5f-8c96-d5202ebe859e ro quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point 
registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, 
using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007da08bff] usable
[    0.000000] BIOS-e820: [mem 0x000000007da08c00-0x000000007da5cbff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007da5cc00-0x000000007da5ebff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007da5ec00-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Dell Inc. OptiPlex 380                 /0HN7XN, BIOS A07 
06/13/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7da08 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 07DC00000 mask FFFC00000 uncachable
[    0.000000]   1 base 07E000000 mask FFE000000 uncachable
[    0.000000]   2 base 07DB00000 mask FFFF00000 uncachable
[    0.000000]   3 base 080000000 mask F80000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at 
[ffff8af4400fe710]
[    0.000000] Base memory trampoline at [ffff8af440099000] 99000 size 24576
[    0.000000] BRK [0x0fb2e000, 0x0fb2efff] PGTABLE
[    0.000000] BRK [0x0fb2f000, 0x0fb2ffff] PGTABLE
[    0.000000] BRK [0x0fb30000, 0x0fb30fff] PGTABLE
[    0.000000] BRK [0x0fb31000, 0x0fb31fff] PGTABLE
[    0.000000] BRK [0x0fb32000, 0x0fb32fff] PGTABLE
[    0.000000] BRK [0x0fb33000, 0x0fb33fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35b7d000-0x36db5fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FEBF0 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000000FCE80 000084 (v01 DELL   B10K     
00000015 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000000FCFA8 0000F4 (v03 DELL   B10K     
00000015 ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000FFE98198 0045F6 (v01 DELL   dt_ex    
00001000 INTL 20050624)
[    0.000000] ACPI: FACS 0x000000007DA08C00 000040
[    0.000000] ACPI: FACS 0x000000007DA08C00 000040
[    0.000000] ACPI: SSDT 0x00000000FFE9C95B 000088 (v01 DELL   st_ex    
00001000 INTL 20050624)
[    0.000000] ACPI: APIC 0x00000000000FD09C 000092 (v01 DELL   B10K     
00000015 ASL  00000061)
[    0.000000] ACPI: BOOT 0x00000000000FD12E 000028 (v01 DELL   B10K     
00000015 ASL  00000061)
[    0.000000] ACPI: MCFG 0x00000000000FD156 00003E (v01 DELL   B10K     
00000015 ASL  00000061)
[    0.000000] ACPI: HPET 0x00000000000FD194 000038 (v01 DELL   B10K     
00000015 ASL  00000061)
[    0.000000] ACPI: TCPA 0x00000000000FD3F0 000032 (v01 DELL   B10K     
00000015 ASL  00000061)
[    0.000000] ACPI: DMAR 0x00000000000FD422 0000F8 (v01 DELL   B10K     
00000015 ASL  00000061)
[    0.000000] ACPI: SLIC 0x00000000000FD1CC 000176 (v01 DELL   B10K     
00000015 ASL  00000061)
[    0.000000] ACPI: SSDT 0x000000007DA08C40 00027D (v01 DpgPmm Cpu0Ist  
00000011 INTL 20050624)
[    0.000000] ACPI: SSDT 0x000000007DA09049 00027D (v01 DpgPmm Cpu1Ist  
00000011 INTL 20050624)
[    0.000000] ACPI: SSDT 0x000000007DA09452 000190 (v01 DpgPmm CpuPm    
00000010 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007da07fff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7da03000-0x7da07fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007da07fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007da07fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007da07fff]
[    0.000000] On node 0 totalpages: 514470
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7977 pages used for memmap
[    0.000000]   DMA32 zone: 510472 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 
0x000000007e000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 
nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff8af4bd400000 s103512 r8192 
d31656 u262144
[    0.000000] pcpu-alloc: s103512 r8192 d31656 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total 
pages: 506408
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 
root=UUID=3443e0d8-0abf-4b5f-8c96-d5202ebe859e ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at 
/build/linux-9uDFZV/linux-4.9.30/drivers/iommu/dmar.c:844 
warn_invalid_dmar.part.8+0x71/0x80
[    0.000000] Your BIOS is broken; DMAR reported at address fedc1000 returns 
all ones!
               BIOS vendor: Dell Inc.; Ver: A07; Product Version: 
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-3-amd64 #1 Debian 
4.9.30-2+deb9u2
[    0.000000] Hardware name: Dell Inc. OptiPlex 380                 /0HN7XN, 
BIOS A07 06/13/2012
[    0.000000]  0000000000000000 ffffffffa2928414 ffffffffa3203dd8 
0000000000000000
[    0.000000]  ffffffffa2676ebe 00000000fedc1000 ffffffffa3203e30 
ffffffffa352d00c
[    0.000000]  ffffffffa352d048 ffffffffa3203ed8 000000000000008e 
ffffffffa2676fb7
[    0.000000] Call Trace:
[    0.000000]  [<ffffffffa2928414>] ? dump_stack+0x5c/0x78
[    0.000000]  [<ffffffffa2676ebe>] ? __warn+0xbe/0xe0
[    0.000000]  [<ffffffffa2676fb7>] ? warn_slowpath_fmt_taint+0x57/0x70
[    0.000000]  [<ffffffffa3354a07>] ? __early_set_fixmap+0x8e/0x91
[    0.000000]  [<ffffffffa336b7a6>] ? __early_ioremap+0x13d/0x1b9
[    0.000000]  [<ffffffffa2a5f661>] ? warn_invalid_dmar.part.8+0x71/0x80
[    0.000000]  [<ffffffffa2bfcbdd>] ? dmar_validate_one_drhd+0x7d/0xd0
[    0.000000]  [<ffffffffa2a5f264>] ? dmar_walk_remapping_entries+0x74/0x180
[    0.000000]  [<ffffffffa3381d95>] ? detect_intel_iommu+0x5b/0xf0
[    0.000000]  [<ffffffffa2bfcb60>] ? xen_swiotlb_init+0x4d0/0x4d0
[    0.000000]  [<ffffffffa3345d3d>] ? pci_iommu_alloc+0x4c/0x67
[    0.000000]  [<ffffffffa335468d>] ? mem_init+0x11/0x93
[    0.000000]  [<ffffffffa3338d3b>] ? start_kernel+0x227/0x463
[    0.000000]  [<ffffffffa3338120>] ? early_idt_handler_array+0x120/0x120
[    0.000000]  [<ffffffffa3338408>] ? x86_64_start_kernel+0x14c/0x170
[    0.000000] ---[ end trace f68728a0d3053b52 ]---
[    0.000000] Memory: 1989576K/2057880K available (6187K kernel code, 1137K 
rwdata, 2856K rodata, 1392K init, 688K bss, 68304K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2925.949 MHz processor
[    0.004012] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 5851.89 BogoMIPS (lpj=11703796)
[    0.004014] pid_max: default: 32768 minimum: 301
[    0.004040] ACPI: Core revision 20160831
[    0.045987] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.046058] Security Framework initialized
[    0.046060] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.046068] AppArmor: AppArmor disabled by boot time parameter
[    0.046198] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.047193] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.047669] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.047672] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.048055] CPU: Physical Processor ID: 0
[    0.048056] CPU: Processor Core ID: 0
[    0.048058] mce: CPU supports 6 MCE banks
[    0.048066] CPU0: Thermal monitoring enabled (TM1)
[    0.048070] process: using mwait in idle threads
[    0.048076] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.048076] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.048372] Freeing SMP alternatives memory: 24K (ffffffffa347a000 - 
ffffffffa3480000)
[    0.050354] ftrace: allocating 25178 entries in 99 pages
[    0.056117] smpboot: Max logical packages: 4
[    0.056128] DMAR: Host address width 36
[    0.056129] DMAR: DRHD base: 0x000000fedc1000 flags: 0x0
[    0.056140] DMAR: Failed to map dmar0
[    0.056182] DMAR: Parse DMAR table failure.
[    0.056553] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100000] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E7500  @ 2.93GHz 
(family: 0x6, model: 0x17, stepping: 0xa)
[    0.100000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.100000] ... version:                2
[    0.100000] ... bit width:              40
[    0.100000] ... generic registers:      2
[    0.100000] ... value mask:             000000ffffffffff
[    0.100000] ... max period:             000000007fffffff
[    0.100000] ... fixed-purpose events:   3
[    0.100000] ... event mask:             0000000700000003
[    0.100000] NMI watchdog: enabled on all CPUs, permanently consumes one 
hw-PMU counter.
[    0.100000] x86: Booting SMP configuration:
[    0.100000] .... node  #0, CPUs:      #1
[    0.178021] x86: Booted up 1 node, 2 CPUs
[    0.178021] smpboot: Total of 2 processors activated (11703.78 BogoMIPS)
[    0.178021] devtmpfs: initialized
[    0.178021] x86/mm: Memory block size: 128MB
[    0.180460] PM: Registering ACPI NVS region [mem 0x7da08c00-0x7da5cbff] 
(344064 bytes)
[    0.180519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 7645041785100000 ns
[    0.180532] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.180590] pinctrl core: initialized pinctrl subsystem
[    0.180706] NET: Registered protocol family 16
[    0.192006] cpuidle: using governor ladder
[    0.204004] cpuidle: using governor menu
[    0.204035] Simple Boot Flag at 0x7a set to 0x1
[    0.204046] ACPI FADT declares the system doesn't support PCIe ASPM, so 
disable it
[    0.204048] ACPI: bus type PCI registered
[    0.204049] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.204153] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.204155] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.204175] PCI: Using configuration type 1 for base access
[    0.204183] dmi type 0xB1 record - unknown flag
[    0.216062] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.216062] ACPI: Added _OSI(Module Device)
[    0.216062] ACPI: Added _OSI(Processor Device)
[    0.216062] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.216062] ACPI: Added _OSI(Processor Aggregator Device)
[    0.239733] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.249520] ACPI: Interpreter enabled
[    0.249534] ACPI: (supports S0 S1 S4 S5)
[    0.249535] ACPI: Using IOAPIC for interrupt routing
[    0.249590] PCI: Using host bridge windows from ACPI; if necessary, use 
"pci=nocrs" and report a bug
[    0.321025] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.321025] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM 
Segments MSI]
[    0.321025] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.324545] PCI host bridge to bus 0000:00
[    0.324547] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.324549] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.324550] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff 
window]
[    0.324551] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff 
window]
[    0.324552] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff 
window]
[    0.324553] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfec00000 
window]
[    0.324555] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff 
window]
[    0.324556] pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff 
window]
[    0.324557] pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff 
window]
[    0.324558] pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff 
window]
[    0.324560] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.324566] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[    0.324585] DMAR: Forcing write-buffer flush capability
[    0.324585] DMAR: Disabling IOMMU for graphics on this chipset
[    0.324857] pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400
[    0.324888] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.325126] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.325165] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
[    0.325173] pci 0000:00:02.0: reg 0x10: [mem 0xfe800000-0xfebfffff 64bit]
[    0.325178] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit 
pref]
[    0.325182] pci 0000:00:02.0: reg 0x20: [io  0xecd8-0xecdf]
[    0.328022] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000
[    0.328029] pci 0000:00:02.1: reg 0x10: [mem 0xfe700000-0xfe7fffff 64bit]
[    0.328337] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.328350] pci 0000:00:1b.0: reg 0x10: [mem 0xfe6fc000-0xfe6fffff 64bit]
[    0.328409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.328684] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.328742] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.328983] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.329028] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.329061] pci 0000:00:1d.0: reg 0x20: [io  0xff80-0xff9f]
[    0.329314] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.329353] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.329386] pci 0000:00:1d.1: reg 0x20: [io  0xff60-0xff7f]
[    0.329639] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.329678] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.329710] pci 0000:00:1d.2: reg 0x20: [io  0xff40-0xff5f]
[    0.329963] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.330003] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.330035] pci 0000:00:1d.3: reg 0x20: [io  0xff20-0xff3f]
[    0.330289] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.330334] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.330348] pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
[    0.330414] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.330686] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.330957] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.331001] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.331069] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 
ACPI/GPIO/TCO
[    0.331073] pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH6 GPIO
[    0.331076] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 
007f)
[    0.331078] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 
0007)
[    0.331367] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.331377] pci 0000:00:1f.1: reg 0x10: [io  0x01f0-0x01f7]
[    0.331384] pci 0000:00:1f.1: reg 0x14: [io  0x03f4-0x03f7]
[    0.331391] pci 0000:00:1f.1: reg 0x18: [io  0x0170-0x0177]
[    0.331398] pci 0000:00:1f.1: reg 0x1c: [io  0x0374-0x0377]
[    0.331405] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[    0.331421] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.331422] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.331423] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.331424] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.331692] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.331702] pci 0000:00:1f.2: reg 0x10: [io  0xfe00-0xfe07]
[    0.331708] pci 0000:00:1f.2: reg 0x14: [io  0xfe10-0xfe13]
[    0.331714] pci 0000:00:1f.2: reg 0x18: [io  0xfe20-0xfe27]
[    0.331720] pci 0000:00:1f.2: reg 0x1c: [io  0xfe30-0xfe33]
[    0.331726] pci 0000:00:1f.2: reg 0x20: [io  0xfec0-0xfecf]
[    0.331755] pci 0000:00:1f.2: PME# supported from D3hot
[    0.332027] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.332070] pci 0000:00:1f.3: reg 0x20: [io  0xece0-0xecff]
[    0.332383] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.332386] pci 0000:00:01.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.332441] pci 0000:02:00.0: [14e4:1692] type 00 class 0x020000
[    0.332465] pci 0000:02:00.0: reg 0x10: [mem 0xfe4f0000-0xfe4fffff 64bit]
[    0.332586] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.344019] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.344025] pci 0000:00:1c.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.344120] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.344130] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] 
(subtractive decode)
[    0.344132] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] 
(subtractive decode)
[    0.344135] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff 
window] (subtractive decode)
[    0.344137] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000effff 
window] (subtractive decode)
[    0.344139] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff 
window] (subtractive decode)
[    0.344142] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfec00000 
window] (subtractive decode)
[    0.344144] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff 
window] (subtractive decode)
[    0.344146] pci 0000:00:1e.0:   bridge window [mem 0xff980000-0xff980fff 
window] (subtractive decode)
[    0.344149] pci 0000:00:1e.0:   bridge window [mem 0xff97c000-0xff97ffff 
window] (subtractive decode)
[    0.344151] pci 0000:00:1e.0:   bridge window [mem 0xfed20000-0xfed9ffff 
window] (subtractive decode)
[    0.359277] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    0.359692] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    0.360419] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.360866] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) 
*0, disabled.
[    0.361283] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
[    0.361754] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.362177] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    0.362618] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[    0.363035] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.363127] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.363127] vgaarb: device added: 
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.363127] vgaarb: loaded
[    0.363127] vgaarb: bridge control possible 0000:00:02.0
[    0.363127] PCI: Using ACPI for IRQ routing
[    0.366144] PCI: pci_cache_line_size set to 64 bytes
[    0.366176] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    0.366178] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.366178] e820: reserve RAM buffer [mem 0x7da08c00-0x7fffffff]
[    0.368023] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.368025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.368028] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.368028] clocksource: Switched to clocksource hpet
[    0.375660] VFS: Disk quotas dquot_6.6.0
[    0.375702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.375811] pnp: PnP ACPI init
[    0.379230] pnp 00:00: disabling [io  0x0800-0x085f] because it overlaps 
0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.379232] pnp 00:00: disabling [io  0x0860-0x08ff] because it overlaps 
0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.379269] system 00:00: [io  0x0c00-0x0c7f] has been reserved
[    0.379273] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.379441] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.389480] pnp 00:02: [dma 1]
[    0.390446] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.403548] pnp: PnP ACPI: found 3 devices
[    0.410004] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, 
max_idle_ns: 2085701024 ns
[    0.410021] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] 
add_size 1000
[    0.410023] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit 
pref] to [bus 02] add_size 200000 add_align 100000
[    0.410033] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] 
res_to_dev_res add_size 200000 min_align 100000
[    0.410034] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] 
res_to_dev_res add_size 200000 min_align 100000
[    0.410036] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res 
add_size 1000 min_align 1000
[    0.410037] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res 
add_size 1000 min_align 1000
[    0.410046] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 
64bit pref]
[    0.410048] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.410050] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.410053] pci 0000:00:01.0:   bridge window [mem 0xfe500000-0xfe5fffff]
[    0.410056] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.410058] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.410062] pci 0000:00:1c.0:   bridge window [mem 0xfe400000-0xfe4fffff]
[    0.410064] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 
64bit pref]
[    0.410069] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.410077] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.410078] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.410080] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.410081] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window]
[    0.410082] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window]
[    0.410083] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000 window]
[    0.410084] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff window]
[    0.410085] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff window]
[    0.410087] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff window]
[    0.410088] pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff window]
[    0.410089] pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.410091] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.410092] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.410093] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit 
pref]
[    0.410094] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.410095] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.410097] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.410098] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000effff window]
[    0.410099] pci_bus 0000:03: resource 8 [mem 0x000f0000-0x000fffff window]
[    0.410100] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfec00000 window]
[    0.410101] pci_bus 0000:03: resource 10 [mem 0x80000000-0xdfffffff window]
[    0.410103] pci_bus 0000:03: resource 11 [mem 0xff980000-0xff980fff window]
[    0.410104] pci_bus 0000:03: resource 12 [mem 0xff97c000-0xff97ffff window]
[    0.410105] pci_bus 0000:03: resource 13 [mem 0xfed20000-0xfed9ffff window]
[    0.410171] NET: Registered protocol family 2
[    0.410361] TCP established hash table entries: 16384 (order: 5, 131072 
bytes)
[    0.410425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.410530] TCP: Hash tables configured (established 16384 bind 16384)
[    0.410575] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.410589] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.410656] NET: Registered protocol family 1
[    0.410671] pci 0000:00:02.0: Video device with shadowed ROM at [mem 
0x000c0000-0x000dffff]
[    0.412529] PCI: CLS 64 bytes, default 64
[    0.412579] Unpacking initramfs...
[    0.715401] Freeing initrd memory: 18660K (ffff8af475b7d000 - 
ffff8af476db6000)
[    0.715977] audit: initializing netlink subsys (disabled)
[    0.716023] audit: type=2000 audit(1500787972.716:1): initialized
[    0.716422] workingset: timestamp_bits=40 max_order=19 bucket_order=0
[    0.716446] zbud: loaded
[    0.717056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
250)
[    0.717081] io scheduler noop registered
[    0.717082] io scheduler deadline registered
[    0.717106] io scheduler cfq registered (default)
[    0.717719] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.717725] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.717738] intel_idle: does not run on family 6 model 23
[    0.717833] GHES: HEST is not enabled!
[    0.717888] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.718357] Linux agpgart interface v0.103
[    0.718462] AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[    0.718462] AMD IOMMUv2 functionality not available on this system
[    0.718621] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.721499] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.721503] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.721631] mousedev: PS/2 mouse device common for all mice
[    0.721675] rtc_cmos 00:01: RTC can wake from S4
[    0.721780] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.721800] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[    0.721820] ledtrig-cpu: registered to indicate activity on CPUs
[    0.722318] NET: Registered protocol family 10
[    0.722542] mip6: Mobile IPv6
[    0.722543] NET: Registered protocol family 17
[    0.722546] mpls_gso: MPLS GSO support
[    0.722681] microcode: sig=0x1067a, pf=0x1, revision=0xa0b
[    0.722713] microcode: Microcode Update Driver: v2.01 
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[    0.722828] registered taskstats version 1
[    0.722840] zswap: loaded using pool lzo/zbud
[    0.722912] ima: No TPM chip found, activating TPM-bypass!
[    0.723107] rtc_cmos 00:01: setting system clock to 2017-07-23 05:32:53 UTC 
(1500787973)
[    0.723145] PM: Hibernation image not present or could not be loaded.
[    0.724534] Freeing unused kernel memory: 1392K (ffffffffa331e000 - 
ffffffffa347a000)
[    0.724536] Write protecting the kernel read-only data: 12288k
[    0.725385] Freeing unused kernel memory: 1988K (ffff8af44f20f000 - 
ffff8af44f400000)
[    0.728287] Freeing unused kernel memory: 1240K (ffff8af44f6ca000 - 
ffff8af44f800000)
[    0.733280] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.744767] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.744842] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.744850] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    0.745707] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.745740] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.746770] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.746828] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.747146] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.747201] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.747258] random: udevadm: uninitialized urandom read (16 bytes read)
[    0.765818] ACPI: bus type USB registered
[    0.765846] usbcore: registered new interface driver usbfs
[    0.765857] usbcore: registered new interface driver hub
[    0.765880] usbcore: registered new device driver usb
[    0.766368] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.766638] uhci_hcd: USB Universal Host Controller Interface driver
[    0.766936] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.766942] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 1
[    0.766949] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.766976] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[    0.767604] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.767607] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.767608] usb usb1: Product: UHCI Host Controller
[    0.767609] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    0.767610] usb usb1: SerialNumber: 0000:00:1d.0
[    0.767820] hub 1-0:1.0: USB hub found
[    0.767949] hub 1-0:1.0: 2 ports detected
[    0.768520] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.768526] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 2
[    0.768532] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.768556] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[    0.768601] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.768602] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.768603] usb usb2: Product: UHCI Host Controller
[    0.768605] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    0.768606] usb usb2: SerialNumber: 0000:00:1d.1
[    0.768713] hub 2-0:1.0: USB hub found
[    0.768718] hub 2-0:1.0: 2 ports detected
[    0.769008] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.769013] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 3
[    0.769021] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.769043] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    0.769187] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.769189] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.769190] usb usb3: Product: UHCI Host Controller
[    0.769191] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    0.769192] usb usb3: SerialNumber: 0000:00:1d.2
[    0.769387] hub 3-0:1.0: USB hub found
[    0.769393] hub 3-0:1.0: 2 ports detected
[    0.769857] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.769861] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus 
number 4
[    0.769866] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.769888] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[    0.771186] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.771188] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.771189] usb usb4: Product: UHCI Host Controller
[    0.771190] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 uhci_hcd
[    0.771192] usb usb4: SerialNumber: 0000:00:1d.3
[    0.771309] hub 4-0:1.0: USB hub found
[    0.771315] hub 4-0:1.0: 2 ports detected
[    0.772968] pps_core: LinuxPPS API ver. 1 registered
[    0.772969] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo 
Giometti <giome...@linux.it>
[    0.773149] PTP clock support registered
[    0.773287] ehci-pci: EHCI PCI platform driver
[    0.773860] tg3.c:v3.137 (May 11, 2014)
[    0.773907] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.773913] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus 
number 5
[    0.773926] ehci-pci 0000:00:1d.7: debug port 1
[    0.777852] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.778130] ehci-pci 0000:00:1d.7: irq 21, io mem 0xff980000
[    0.781589] SCSI subsystem initialized
[    0.783682] libata version 3.00 loaded.
[    0.785286] libphy: tg3 mdio bus: probed
[    0.792068] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.792140] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    0.792142] usb usb5: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    0.792143] usb usb5: Product: EHCI Host Controller
[    0.792144] usb usb5: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[    0.792145] usb usb5: SerialNumber: 0000:00:1d.7
[    0.792369] hub 5-0:1.0: USB hub found
[    0.792376] hub 5-0:1.0: 8 ports detected
[    0.820107] hub 1-0:1.0: USB hub found
[    0.820120] hub 1-0:1.0: 2 ports detected
[    0.848094] hub 2-0:1.0: USB hub found
[    0.848108] hub 2-0:1.0: 2 ports detected
[    0.870305] Broadcom BCM57780 200:01: attached PHY driver [Broadcom 
BCM57780] (mii_bus:phy_addr=200:01, irq=-1)
[    0.870544] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] 
(PCI Express) MAC address bc:30:5b:ac:fc:f6
[    0.870546] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] 
TSOcap[1]
[    0.870547] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    0.876098] hub 3-0:1.0: USB hub found
[    0.876112] hub 3-0:1.0: 2 ports detected
[    0.904091] hub 4-0:1.0: USB hub found
[    0.904104] hub 4-0:1.0: 2 ports detected
[    0.904540] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.904677] ata_piix 0000:00:1f.1: version 2.13
[    0.905559] scsi host0: ata_piix
[    0.905794] scsi host1: ata_piix
[    0.905846] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    0.905847] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    0.906049] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.906093] ata1: port disabled--ignoring
[    0.906110] ata2: port disabled--ignoring
[    1.064386] scsi host2: ata_piix
[    1.064466] scsi host3: ata_piix
[    1.064511] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20
[    1.064512] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20
[    1.120016] usb 5-1: new high-speed USB device number 2 using ehci-pci
[    1.224264] ata4.01: NODEV after polling detection
[    1.226569] ata4.00: ATAPI: TSSTcorpDVD-ROM TS-H353C, D100, max UDMA/100
[    1.226687] ata3.00: ATA-8: ST1000VM002-1CT162, SC23, max UDMA/133
[    1.226690] ata3.00: 1953525168 sectors, multi 8: LBA48 NCQ (depth 0/32)
[    1.231050] ata4.00: configured for UDMA/100
[    1.231391] ata3.00: configured for UDMA/133
[    1.231618] scsi 2:0:0:0: Direct-Access     ATA      ST1000VM002-1CT1 SC23 
PQ: 0 ANSI: 5
[    1.268798] usb 5-1: New USB device found, idVendor=0409, idProduct=0058
[    1.268801] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.268803] usb 5-1: Product: USB2.0 Hub Controller
[    1.268805] usb 5-1: Manufacturer: NEC Corporation
[    1.268948] hub 5-1:1.0: USB hub found
[    1.269079] scsi 3:0:0:0: CD-ROM            TSSTcorp DVD-ROM TS-H353C D100 
PQ: 0 ANSI: 5
[    1.269111] hub 5-1:1.0: 4 ports detected
[    1.287051] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 
TB/932 GiB)
[    1.287053] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    1.287098] sd 2:0:0:0: [sda] Write Protect is off
[    1.287100] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.287117] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    1.297735] sr 3:0:0:0: [sr0] scsi3-mmc drive: 1x/8x cd/rw xa/form2 cdda tray
[    1.297737] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.297925] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    1.333519]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    1.333995] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.388020] usb 5-2: new high-speed USB device number 3 using ehci-pci
[    1.552927] usb 5-2: New USB device found, idVendor=0cf3, idProduct=9271
[    1.552930] usb 5-2: New USB device strings: Mfr=16, Product=32, 
SerialNumber=48
[    1.552932] usb 5-2: Product: USB2.0 WLAN
[    1.552934] usb 5-2: Manufacturer: ATHEROS
[    1.552936] usb 5-2: SerialNumber: 12345
[    1.636022] usb 5-1.1: new low-speed USB device number 4 using ehci-pci
[    1.728015] tsc: Refined TSC clocksource calibration: 2925.981 MHz
[    1.728019] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 
0x2a2d228446b, max_idle_ns: 440795275274 ns
[    1.741062] random: fast init done
[    1.748927] usb 5-1.1: New USB device found, idVendor=046d, idProduct=c404
[    1.748930] usb 5-1.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    1.748932] usb 5-1.1: Product: Trackball
[    1.748934] usb 5-1.1: Manufacturer: Logitech
[    1.750555] hidraw: raw HID events driver (C) Jiri Kosina
[    1.755200] usbcore: registered new interface driver usbhid
[    1.755201] usbhid: USB HID core driver
[    1.755867] input: Logitech Trackball as 
/devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.1/5-1.1:1.0/0003:046D:C404.0001/input/input3
[    1.756033] hid-generic 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 
Mouse [Logitech Trackball] on usb-0000:00:1d.7-1.1/input0
[    1.848025] usb 5-1.2: new low-speed USB device number 5 using ehci-pci
[    1.961299] usb 5-1.2: New USB device found, idVendor=0e8f, idProduct=0022
[    1.961302] usb 5-1.2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    1.961304] usb 5-1.2: Product: USB KB V11
[    1.961306] usb 5-1.2: Manufacturer: GASIA
[    1.964297] input: GASIA USB KB V11 as 
/devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.2/5-1.2:1.0/0003:0E8F:0022.0002/input/input4
[    2.024298] hid-generic 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 
Keyboard [GASIA USB KB V11] on usb-0000:00:1d.7-1.2/input0
[    2.029094] input: GASIA USB KB V11 as 
/devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.2/5-1.2:1.1/0003:0E8F:0022.0003/input/input5
[    2.088077] hid-generic 0003:0E8F:0022.0003: input,hidraw2: USB HID v1.10 
Device [GASIA USB KB V11] on usb-0000:00:1d.7-1.2/input1
[    2.752075] clocksource: Switched to clocksource tsc
[    4.064053] floppy0: no floppy controllers found
[    4.108452] PM: Starting manual resume from disk
[    4.108455] PM: Hibernation image partition 8:6 present
[    4.108456] PM: Looking for hibernation image.
[    4.108693] PM: Image not found (code -22)
[    4.108695] PM: Hibernation image not present or could not be loaded.
[    4.332699] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: 
(null)
[    5.309143] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.401021] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT 
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS 
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    5.401123] systemd[1]: Detected architecture x86-64.
[    5.410997] systemd[1]: Set hostname to <hercules>.
[    6.268106] random: crng init done
[    6.361707] systemd[1]: NetworkManager.service: Cannot add dependency job, 
ignoring: Unit NetworkManager.service is masked.
[    6.362277] systemd[1]: Listening on udev Kernel Socket.
[    6.362348] systemd[1]: Listening on udev Control Socket.
[    6.362413] systemd[1]: Listening on Journal Audit Socket.
[    6.362553] systemd[1]: Created slice System Slice.
[    6.363069] systemd[1]: Mounting POSIX Message Queue File System...
[    6.363683] systemd[1]: Mounting Huge Pages File System...
[    6.761508] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    6.935271] RPC: Registered named UNIX socket transport module.
[    6.935272] RPC: Registered udp transport module.
[    6.935273] RPC: Registered tcp transport module.
[    6.935273] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    8.778975] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.785721] wmi: Mapper loaded
[    8.808407] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[    8.808410] ACPI: Power Button [VBTN]
[    8.808464] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[    8.808466] ACPI: Power Button [PWRF]
[    8.853439] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    8.854182] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    8.966113] [drm] Initialized
[    9.018052] parport_pc 00:02: reported by Plug and Play ACPI
[    9.018111] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[    9.154877] intel_rng: Firmware space is locked read-only. If you can't or
               intel_rng: don't want to disable this in firmware setup, and if
               intel_rng: you are certain that your system has a functional
               intel_rng: RNG, try using the 'no_fwh_detect' option.
[    9.848643] ACPI Warning: SystemIO range 
0x0000000000000828-0x000000000000082F conflicts with OpRegion 
0x0000000000000828-0x000000000000082D (\GLBC) (20160831/utaddress-247)
[    9.848649] ACPI Warning: SystemIO range 
0x0000000000000828-0x000000000000082F conflicts with OpRegion 
0x000000000000082A-0x000000000000082A (\SACT) (20160831/utaddress-247)
[    9.848652] ACPI Warning: SystemIO range 
0x0000000000000828-0x000000000000082F conflicts with OpRegion 
0x0000000000000828-0x0000000000000828 (\SSTS) (20160831/utaddress-247)
[    9.848655] ACPI: If an ACPI driver is available for this device, you should 
use it instead of the native driver
[    9.848684] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.853218] pci 0000:00:00.0: Intel G41 Chipset
[    9.853231] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K 
mappable
[    9.853836] pci 0000:00:00.0: detected 32768K stolen memory
[    9.853861] [drm] Memory usable by graphics device = 2048M
[    9.853865] [drm] Replacing VGA console driver
[    9.854496] Console: switching to colour dummy device 80x25
[    9.862058] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.862059] [drm] Driver supports precise vblank timestamp query.
[    9.862259] vgaarb: device changed decodes: 
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.864595] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    9.864932] [drm] RC6 disabled, disabling runtime PM support
[    9.865203] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[    9.922284] leds_ss4200: no LED devices found
[    9.956815] usb 5-2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw 
requested
[    9.956834] usbcore: registered new interface driver ath9k_htc
[   10.089408] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 
0x411111f0
[   10.089924] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: 
line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[   10.089925] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 
(0x14/0x0/0x0/0x0/0x0)
[   10.089927] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 
(0x1a/0x0/0x0/0x0/0x0)
[   10.089928] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   10.089929] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   10.089931] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x19
[   10.089932] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x18
[   10.100037] input: HDA Digital PCBeep as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   10.100695] input: HDA Intel Rear Mic as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   10.100728] input: HDA Intel Front Mic as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   10.100759] input: HDA Intel Line Out as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   10.100791] input: HDA Intel Front Headphone as 
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   10.159156] fbcon: inteldrmfb (fb0) is primary device
[   10.165142] dcdbas dcdbas: Dell Systems Management Base Driver (version 
5.6.0-3.2)
[   10.215453] Console: switching to colour frame buffer device 160x64
[   10.234651] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   10.347657] ppdev: user-space parallel port driver
[   10.406081] iTCO_vendor_support: vendor-support=0
[   10.407242] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   10.407277] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by 
hardware/BIOS
[   10.426580] dell_wmi: Detected Dell WMI interface version 1
[   10.426644] input: Dell WMI hotkeys as /devices/virtual/input/input14
[   10.493502] intel_powerclamp: No package C-state available
[   10.524421] intel_powerclamp: No package C-state available
[   10.566241] usb 5-2: firmware: direct-loading firmware 
ath9k_htc/htc_9271-1.4.0.fw
[   10.595486] Adding 2056188k swap on /dev/sda6.  Priority:-1 extents:1 
across:2056188k FS
[   10.845055] usb 5-2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, 
size: 51008
[   11.096929] ath9k_htc 5-2:1.0: ath9k_htc: HTC initialized with 33 credits
[   11.361553] ath9k_htc 5-2:1.0: ath9k_htc: FW Version: 1.4
[   11.361556] ath9k_htc 5-2:1.0: FW RMW support: On
[   11.361558] ath: EEPROM regdomain: 0x809c
[   11.361559] ath: EEPROM indicates we should expect a country code
[   11.361560] ath: doing EEPROM country->regdmn map search
[   11.361562] ath: country maps to regdmn code: 0x52
[   11.361563] ath: Country alpha2 being used: CN
[   11.361564] ath: Regpair used: 0x52
[   11.410145] ieee80211 phy0: Atheros AR9271 Rev:1
[   12.000050] floppy0: no floppy controllers found
[   12.545613] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: 
(null)
[   12.729394] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: 
(null)
[   12.795105] systemd-journald[189]: Received request to flush runtime journal 
from PID 1
[   75.260687] [drm:i965_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun

Reply via email to