On 07/01/10 at 20:38 +0100, Salvatore Bonaccorso wrote: > Hi Lucas > > On Tue, Dec 29, 2009 at 03:15:01PM +0200, Damyan Ivanov wrote: > > -=| gregor herrmann, Tue, Dec 29, 2009 at 12:34:33PM +0100 |=- > > > Hm, we could also skip this test since it seems rather arbitrary ... > > > But I won't stop anyone from implementing the looping idea :) > > > > As discussed on IRC, I've replaced the standard test with a verbose > > one. We'll ask Lucas for test rebuilds after the upload and see what > > happens. > > If it is possible, when you are dooing the next run of the archive > rebuild, could you sent this to the bugreport?
Hi, here is the log (two build attempts, both failed). - Lucas DC-Build-Header: libbsd-resource-perl 1.2903-2 / Fri Jan 08 20:30:38 +0100 2010 sbuild (Debian sbuild) 0.59.0 (02 Aug 2009) on griffon-82.nancy.grid5000.fr ╔══════════════════════════════════════════════════════════════════════════════╗ ║ libbsd-resource-perl 1.2903-2 (amd64) 08 Jan 2010 20:30 ║ ╚══════════════════════════════════════════════════════════════════════════════╝ Package: libbsd-resource-perl Version: 1.2903-2 Architecture: amd64 Start Time: 20100108-2030 ┌──────────────────────────────────────────────────────────────────────────────┐ │ Fetch source files │ └──────────────────────────────────────────────────────────────────────────────┘ Check APT ───────── Checking available source versions... Download source files with APT ────────────────────────────── Reading package lists... Building dependency tree... Reading state information... Need to get 63.5kB of source archives. Get:1 http://localhost sid/main libbsd-resource-perl 1.2903-2 (dsc) [1505B] Get:2 http://localhost sid/main libbsd-resource-perl 1.2903-2 (tar) [59.3kB] Get:3 http://localhost sid/main libbsd-resource-perl 1.2903-2 (diff) [2705B] Fetched 63.5kB in 0s (179kB/s) Download complete and in download only mode Check arch ────────── ** Using build dependencies supplied by package: Build-Depends: perl (>= 5.8), debhelper (>= 7.0.50), libtest-pod-perl, libtest-pod-coverage-perl ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install build dependencies │ └──────────────────────────────────────────────────────────────────────────────┘ Checking for already installed source dependencies... perl: already installed (5.10.1-8 >= 5.8 is satisfied) debhelper: missing Using default version 7.4.11 libtest-pod-perl: missing libtest-pod-coverage-perl: missing Checking for source dependency conflicts... Installing positive dependencies: debhelper libtest-pod-perl libtest-pod-coverage-perl Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils file gettext gettext-base groff-base html2text intltool-debian libcroco3 libdevel-symdump-perl libglib2.0-0 libio-stringy-perl libmagic1 libpcre3 libpod-coverage-perl libxml2 man-db po-debconf Suggested packages: wamerican wordlist whois vacation dh-make gettext-doc groff www-browser libmail-box-perl Recommended packages: curl wget lynx cvs libglib2.0-data shared-mime-info xml-core libmail-sendmail-perl The following NEW packages will be installed: bsdmainutils debhelper file gettext gettext-base groff-base html2text intltool-debian libcroco3 libdevel-symdump-perl libglib2.0-0 libio-stringy-perl libmagic1 libpcre3 libpod-coverage-perl libtest-pod-coverage-perl libtest-pod-perl libxml2 man-db po-debconf 0 upgraded, 20 newly installed, 0 to remove and 0 not upgraded. Need to get 9119kB of archives. After this operation, 27.0MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! bsdmainutils groff-base man-db libmagic1 file gettext-base libpcre3 libxml2 html2text libglib2.0-0 libcroco3 gettext intltool-debian po-debconf debhelper libdevel-symdump-perl libio-stringy-perl libpod-coverage-perl libtest-pod-coverage-perl libtest-pod-perl Authentication warning overridden. Get:1 http://localhost sid/main bsdmainutils 8.0.5 [200kB] Get:2 http://localhost sid/main groff-base 1.20.1-6 [1156kB] Get:3 http://localhost sid/main man-db 2.5.6-5 [1492kB] Get:4 http://localhost sid/main libmagic1 5.03-5 [393kB] Get:5 http://localhost sid/main file 5.03-5 [47.6kB] Get:6 http://localhost sid/main gettext-base 0.17-8 [133kB] Get:7 http://localhost sid/main libpcre3 7.8-3 [215kB] Get:8 http://localhost sid/main libxml2 2.7.6.dfsg-1 [876kB] Get:9 http://localhost sid/main html2text 1.3.2a-14 [103kB] Get:10 http://localhost sid/main libglib2.0-0 2.22.3-2 [999kB] Get:11 http://localhost sid/main libcroco3 0.6.2-1 [125kB] Get:12 http://localhost sid/main gettext 0.17-8 [2503kB] Get:13 http://localhost sid/main intltool-debian 0.35.0+20060710.1 [30.8kB] Get:14 http://localhost sid/main po-debconf 1.0.16 [224kB] Get:15 http://localhost sid/main debhelper 7.4.11 [459kB] Get:16 http://localhost sid/main libdevel-symdump-perl 2.08-2 [16.5kB] Get:17 http://localhost sid/main libio-stringy-perl 2.110-4 [99.7kB] Get:18 http://localhost sid/main libpod-coverage-perl 0.20-1 [24.5kB] Get:19 http://localhost sid/main libtest-pod-coverage-perl 1.08-3 [10.8kB] Get:20 http://localhost sid/main libtest-pod-perl 1.40-1 [12.5kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 9119kB in 0s (31.0MB/s) Selecting previously deselected package bsdmainutils. (Reading database ... 9977 files and directories currently installed.) Unpacking bsdmainutils (from .../bsdmainutils_8.0.5_amd64.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.20.1-6_amd64.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.6-5_amd64.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_5.03-5_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_5.03-5_amd64.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-8_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.8-3_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-1_amd64.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-14_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.22.3-2_amd64.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_amd64.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-8_amd64.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.4.11_all.deb) ... Selecting previously deselected package libdevel-symdump-perl. Unpacking libdevel-symdump-perl (from .../libdevel-symdump-perl_2.08-2_all.deb) ... Selecting previously deselected package libio-stringy-perl. Unpacking libio-stringy-perl (from .../libio-stringy-perl_2.110-4_all.deb) ... Selecting previously deselected package libpod-coverage-perl. Unpacking libpod-coverage-perl (from .../libpod-coverage-perl_0.20-1_all.deb) ... Selecting previously deselected package libtest-pod-coverage-perl. Unpacking libtest-pod-coverage-perl (from .../libtest-pod-coverage-perl_1.08-3_all.deb) ... Selecting previously deselected package libtest-pod-perl. Unpacking libtest-pod-perl (from .../libtest-pod-perl_1.40-1_all.deb) ... Setting up bsdmainutils (8.0.5) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. Setting up groff-base (1.20.1-6) ... Setting up man-db (2.5.6-5) ... Building database of manual pages ... Setting up libmagic1 (5.03-5) ... Setting up file (5.03-5) ... Setting up gettext-base (0.17-8) ... Setting up libpcre3 (7.8-3) ... Setting up libxml2 (2.7.6.dfsg-1) ... Setting up html2text (1.3.2a-14) ... Setting up libglib2.0-0 (2.22.3-2) ... Setting up libcroco3 (0.6.2-1) ... Setting up gettext (0.17-8) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16) ... Setting up debhelper (7.4.11) ... Setting up libdevel-symdump-perl (2.08-2) ... Setting up libio-stringy-perl (2.110-4) ... Setting up libpod-coverage-perl (0.20-1) ... Setting up libtest-pod-coverage-perl (1.08-3) ... Setting up libtest-pod-perl (1.40-1) ... Removing negative dependencies: Checking correctness of source dependencies... Kernel: Linux 2.6.26-2-amd64 amd64 (x86_64) Toolchain package versions: libc6-dev_2.10.2-5 linux-libc-dev_2.6.32-4 g++-4.4_4.4.2-8 gcc-4.4_4.4.2-8 binutils_2.20-4 libstdc++6_4.4.2-8 libstdc++6-4.4-dev_4.4.2-8 ┌──────────────────────────────────────────────────────────────────────────────┐ │ Build │ └──────────────────────────────────────────────────────────────────────────────┘ Unpack source ───────────── gpgv: keyblock resource `/home/user/.gnupg/trustedkeys.gpg': file open error gpgv: Signature made Tue Dec 29 16:45:17 2009 CET using DSA key ID 9725F63B gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./libbsd-resource-perl_1.2903-2.dsc dpkg-source: info: extracting libbsd-resource-perl in libbsd-resource-perl-1.2903 dpkg-source: info: unpacking libbsd-resource-perl_1.2903.orig.tar.gz dpkg-source: info: applying libbsd-resource-perl_1.2903-2.diff.gz Check disc space ──────────────── dpkg-buildpackage ───────────────── dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package libbsd-resource-perl dpkg-buildpackage: source version 1.2903-2 dpkg-buildpackage: source changed by Damyan Ivanov <d...@debian.org> dpkg-buildpackage: host architecture amd64 /usr/bin/fakeroot debian/rules clean dh clean dh_testdir dh_auto_clean dh_clean dpkg-source -b libbsd-resource-perl-1.2903 dpkg-source: info: using source format `1.0' dpkg-source: info: building libbsd-resource-perl using existing libbsd-resource-perl_1.2903.orig.tar.gz dpkg-source: info: building libbsd-resource-perl in libbsd-resource-perl_1.2903-2.diff.gz debian/rules build dpkg-source: info: building libbsd-resource-perl in libbsd-resource-perl_1.2903-2.dsc dh build dh_testdir dh_auto_configure Configuring BSD::Resource... Checking whether you have certain header files... You do have <sys/resource.h>. Excellent. Checking to see whether you have rlim_t... You seem to have rlim_t defined (which is nice). Checking if your kit is complete... Looks good 'CREATE_PACKLIST' is not a known MakeMaker parameter name. Writing Makefile for BSD::Resource Done configuring BSD::Resource. Now you may issue 'make'. Do not forget also 'make test'. If some tests fail, please rerun the tests (see INSTALL). dh_auto_build make[1]: Entering directory `/build/user-libbsd-resource-perl_1.2903-2-amd64-CtN2L_/libbsd-resource-perl-1.2903' cp Resource.pm blib/lib/BSD/Resource.pm AutoSplitting blib/lib/BSD/Resource.pm (blib/lib/auto/BSD/Resource) /usr/bin/perl /usr/share/perl/5.10/ExtUtils/xsubpp -typemap /usr/share/perl/5.10/ExtUtils/typemap Resource.xs > Resource.xsc && mv Resource.xsc Resource.c cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"1.2903\" -DXS_VERSION=\"1.2903\" -fPIC "-I/usr/lib/perl/5.10/CORE" -DRlim_t=rlim_t Resource.c Running Mkbootstrap for BSD::Resource () chmod 644 Resource.bs rm -f blib/arch/auto/BSD/Resource/Resource.so cc -shared -O2 -g -L/usr/local/lib -fstack-protector Resource.o -o blib/arch/auto/BSD/Resource/Resource.so \ \ chmod 755 blib/arch/auto/BSD/Resource/Resource.so cp Resource.bs blib/arch/auto/BSD/Resource/Resource.bs chmod 644 blib/arch/auto/BSD/Resource/Resource.bs Manifying blib/man3/BSD::Resource.3pm make[1]: Leaving directory `/build/user-libbsd-resource-perl_1.2903-2-amd64-CtN2L_/libbsd-resource-perl-1.2903' debian/rules override_dh_auto_test make[1]: Entering directory `/build/user-libbsd-resource-perl_1.2903-2-amd64-CtN2L_/libbsd-resource-perl-1.2903' prove --blib --verbose t/getpriority.t ... 1..3 # nowprio1 = 17 ok 1 # nowprio2 = 17 ok 2 # nowprio3 = 17 ok 3 ok t/getrlimit.t ..... 1..15 # k = RLIMIT_CPU RLIMIT_OPEN_MAX RLIMIT_LOCKS RLIMIT_VMEM RLIMIT_FSIZE RLIMIT_STACK RLIMIT_MEMLOCK RLIMIT_NPROC RLIMIT_DATA RLIMIT_NOFILE RLIMIT_OFILE RLIMIT_RSS RLIMIT_AS RLIMIT_CORE, v = 0 7 10 9 1 3 8 6 2 7 7 5 9 4 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok t/getrusage.t ..... 1..2 # getrusage # ru = 1.356084 0.008 0 0 0 0 1001 0 0 0 0 0 0 0 0 71 # times # tsu = 1.35, tss = 0 # sleep(6) # real = 9 # ruu = 1.356084, tsu = 1.35 # rus = 0.008, tss = 0 # ruc = 1.364084, tsc = 1.35 # real = 9 # far: a = 1.356084, b = 1.35, r = 0.2 # far: abs(a/b-1) = 0.00450666666666666 # far: a = 0.008, b = 0, r = 0.4 # far: abs(a/b-1) = - ok 1 # @ru = (2.708169 0.008 0 0 0 0 1056 0 0 0 0 0 0 0 1 152) # far: a = 2.708169, b = 2.708169, r = 0.2 # far: abs(a/b-1) = 0 # far: a = 0.008, b = 0.008, r = 0.4 # far: abs(a/b-1) = 0 ok 2 ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on BSD::Resource ok t/pod.t ........... 1..1 ok 1 - blib/lib/BSD/Resource.pm ok t/setpriority.t ... 1..3 # nice = 0 # origprio = 17 () # gotlower = 1 () # lowerprio = 18 () ok 1 ok 2 # skipped (origprio = 17) ok 3 # skipped (euid = 1001) ok t/setrlimit.t ..... 1..14 # lim = RLIMIT_AS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 1 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_CORE # old_soft = 0, old_hard = -1 # try_soft = 0, try_hard = -1 # setrlimit(RLIMIT_CORE, 0) = OK # getrlimit(RLIMIT_CORE) = 0 ok 2 # 0 <= 0 # lim = RLIMIT_CPU # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 3 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_DATA # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 4 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_FSIZE # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 5 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_LOCKS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 6 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_MEMLOCK # old_soft = 32768, old_hard = 32768 # try_soft = 24576, try_hard = 24576 # setrlimit(RLIMIT_MEMLOCK, 24576) = OK # getrlimit(RLIMIT_MEMLOCK) = 24576 ok 7 # 24576 <= 24576 # lim = RLIMIT_NOFILE # old_soft = 1024, old_hard = 1024 # try_soft = 768, try_hard = 768 # setrlimit(RLIMIT_NOFILE, 768) = OK # getrlimit(RLIMIT_NOFILE) = 768 ok 8 # 768 <= 768 # lim = RLIMIT_NPROC # old_soft = 139264, old_hard = 139264 # try_soft = 104448, try_hard = 104448 # setrlimit(RLIMIT_NPROC, 104448) = OK # getrlimit(RLIMIT_NPROC) = 104448 ok 9 # 104448 <= 104448 # lim = RLIMIT_OFILE # old_soft = 768, old_hard = 768 # try_soft = 576, try_hard = 576 # setrlimit(RLIMIT_OFILE, 576) = OK # getrlimit(RLIMIT_OFILE) = 576 ok 10 # 576 <= 576 # lim = RLIMIT_OPEN_MAX # old_soft = 576, old_hard = 576 # try_soft = 432, try_hard = 432 # setrlimit(RLIMIT_OPEN_MAX, 432) = OK # getrlimit(RLIMIT_OPEN_MAX) = 432 ok 11 # 432 <= 432 # lim = RLIMIT_RSS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 12 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_STACK # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 13 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_VMEM # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 14 # SKIP soft_limit == RLIM_INFINITY ok t/times.t ......... 1..2 # CORE::times() = 2.69 0.01 0 0 # times = 2.692168 0.016001 0 0 # BSD::Resource::times() = 2.692168 0.016001 0 0 # far: a = 2.692168, b = 2.69, r = 0.1 # far: abs(a/b-1) = 0.000805947955390351 # far: a = 0.016001, b = 0.01, r = 0.5 # far: abs(a/b-1) = 0.6001 not ok 1 # far: a = 2.692168, b = 2.692168, r = 0.1 # far: abs(a/b-1) = 0 # far: a = 0.016001, b = 0.016001, r = 0.1 # far: abs(a/b-1) = 0 # far: a = 0, b = 0, r = 0.1 # far: abs(a/b-1) = - # far: a = 0, b = 0, r = 0.1 # far: abs(a/b-1) = - ok 2 Failed 1/2 subtests Test Summary Report ------------------- t/times.t (Wstat: 0 Tests: 2 Failed: 1) Failed test: 1 Files=8, Tests=41, 20 wallclock secs ( 0.04 usr 0.00 sys + 5.54 cusr 0.06 csys = 5.64 CPU) Result: FAIL make[1]: *** [override_dh_auto_test] Error 1 make[1]: Leaving directory `/build/user-libbsd-resource-perl_1.2903-2-amd64-CtN2L_/libbsd-resource-perl-1.2903' make: *** [build] Error 2 dpkg-buildpackage: error: debian/rules build gave error exit status 2 ──────────────────────────────────────────────────────────────────────────────── Build finished at 20100108-2032 FAILED [dpkg-buildpackage died] Purging /var/lib/schroot/mount/lsid64-de51ee79-85ca-4192-b1d8-eb82f8da93d1/build/user-libbsd-resource-perl_1.2903-2-amd64-CtN2L_ ──────────────────────────────────────────────────────────────────────────────── Not removing build depends: cloned chroot in use ──────────────────────────────────────────────────────────────────────────────── Finished at 20100108-2032 Build needed 00:01:47, 720k disc space DC-Message: Failed, but took only 121.764518. Retrying, you never know. Requested exclusive mode, but other builds running. Requested exclusive mode, but other builds running. Requested exclusive mode, but other builds running. Requested exclusive mode, but other builds running. sbuild (Debian sbuild) 0.59.0 (02 Aug 2009) on griffon-82.nancy.grid5000.fr ╔══════════════════════════════════════════════════════════════════════════════╗ ║ libbsd-resource-perl 1.2903-2 (amd64) 08 Jan 2010 20:34 ║ ╚══════════════════════════════════════════════════════════════════════════════╝ Package: libbsd-resource-perl Version: 1.2903-2 Architecture: amd64 Start Time: 20100108-2034 ┌──────────────────────────────────────────────────────────────────────────────┐ │ Fetch source files │ └──────────────────────────────────────────────────────────────────────────────┘ Check APT ───────── Checking available source versions... Download source files with APT ────────────────────────────── Reading package lists... Building dependency tree... Reading state information... Need to get 63.5kB of source archives. Get:1 http://localhost sid/main libbsd-resource-perl 1.2903-2 (dsc) [1505B] Get:2 http://localhost sid/main libbsd-resource-perl 1.2903-2 (tar) [59.3kB] Get:3 http://localhost sid/main libbsd-resource-perl 1.2903-2 (diff) [2705B] Fetched 63.5kB in 0s (0B/s) Download complete and in download only mode Check arch ────────── ** Using build dependencies supplied by package: Build-Depends: perl (>= 5.8), debhelper (>= 7.0.50), libtest-pod-perl, libtest-pod-coverage-perl ┌──────────────────────────────────────────────────────────────────────────────┐ │ Install build dependencies │ └──────────────────────────────────────────────────────────────────────────────┘ Checking for already installed source dependencies... perl: already installed (5.10.1-8 >= 5.8 is satisfied) debhelper: missing Using default version 7.4.11 libtest-pod-perl: missing libtest-pod-coverage-perl: missing Checking for source dependency conflicts... Installing positive dependencies: debhelper libtest-pod-perl libtest-pod-coverage-perl Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: bsdmainutils file gettext gettext-base groff-base html2text intltool-debian libcroco3 libdevel-symdump-perl libglib2.0-0 libio-stringy-perl libmagic1 libpcre3 libpod-coverage-perl libxml2 man-db po-debconf Suggested packages: wamerican wordlist whois vacation dh-make gettext-doc groff www-browser libmail-box-perl Recommended packages: curl wget lynx cvs libglib2.0-data shared-mime-info xml-core libmail-sendmail-perl The following NEW packages will be installed: bsdmainutils debhelper file gettext gettext-base groff-base html2text intltool-debian libcroco3 libdevel-symdump-perl libglib2.0-0 libio-stringy-perl libmagic1 libpcre3 libpod-coverage-perl libtest-pod-coverage-perl libtest-pod-perl libxml2 man-db po-debconf 0 upgraded, 20 newly installed, 0 to remove and 0 not upgraded. Need to get 9119kB of archives. After this operation, 27.0MB of additional disk space will be used. WARNING: The following packages cannot be authenticated! bsdmainutils groff-base man-db libmagic1 file gettext-base libpcre3 libxml2 html2text libglib2.0-0 libcroco3 gettext intltool-debian po-debconf debhelper libdevel-symdump-perl libio-stringy-perl libpod-coverage-perl libtest-pod-coverage-perl libtest-pod-perl Authentication warning overridden. Get:1 http://localhost sid/main bsdmainutils 8.0.5 [200kB] Get:2 http://localhost sid/main groff-base 1.20.1-6 [1156kB] Get:3 http://localhost sid/main man-db 2.5.6-5 [1492kB] Get:4 http://localhost sid/main libmagic1 5.03-5 [393kB] Get:5 http://localhost sid/main file 5.03-5 [47.6kB] Get:6 http://localhost sid/main gettext-base 0.17-8 [133kB] Get:7 http://localhost sid/main libpcre3 7.8-3 [215kB] Get:8 http://localhost sid/main libxml2 2.7.6.dfsg-1 [876kB] Get:9 http://localhost sid/main html2text 1.3.2a-14 [103kB] Get:10 http://localhost sid/main libglib2.0-0 2.22.3-2 [999kB] Get:11 http://localhost sid/main libcroco3 0.6.2-1 [125kB] Get:12 http://localhost sid/main gettext 0.17-8 [2503kB] Get:13 http://localhost sid/main intltool-debian 0.35.0+20060710.1 [30.8kB] Get:14 http://localhost sid/main po-debconf 1.0.16 [224kB] Get:15 http://localhost sid/main debhelper 7.4.11 [459kB] Get:16 http://localhost sid/main libdevel-symdump-perl 2.08-2 [16.5kB] Get:17 http://localhost sid/main libio-stringy-perl 2.110-4 [99.7kB] Get:18 http://localhost sid/main libpod-coverage-perl 0.20-1 [24.5kB] Get:19 http://localhost sid/main libtest-pod-coverage-perl 1.08-3 [10.8kB] Get:20 http://localhost sid/main libtest-pod-perl 1.40-1 [12.5kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 9119kB in 0s (60.3MB/s) Selecting previously deselected package bsdmainutils. (Reading database ... 9977 files and directories currently installed.) Unpacking bsdmainutils (from .../bsdmainutils_8.0.5_amd64.deb) ... Selecting previously deselected package groff-base. Unpacking groff-base (from .../groff-base_1.20.1-6_amd64.deb) ... Selecting previously deselected package man-db. Unpacking man-db (from .../man-db_2.5.6-5_amd64.deb) ... Selecting previously deselected package libmagic1. Unpacking libmagic1 (from .../libmagic1_5.03-5_amd64.deb) ... Selecting previously deselected package file. Unpacking file (from .../archives/file_5.03-5_amd64.deb) ... Selecting previously deselected package gettext-base. Unpacking gettext-base (from .../gettext-base_0.17-8_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.8-3_amd64.deb) ... Selecting previously deselected package libxml2. Unpacking libxml2 (from .../libxml2_2.7.6.dfsg-1_amd64.deb) ... Selecting previously deselected package html2text. Unpacking html2text (from .../html2text_1.3.2a-14_amd64.deb) ... Selecting previously deselected package libglib2.0-0. Unpacking libglib2.0-0 (from .../libglib2.0-0_2.22.3-2_amd64.deb) ... Selecting previously deselected package libcroco3. Unpacking libcroco3 (from .../libcroco3_0.6.2-1_amd64.deb) ... Selecting previously deselected package gettext. Unpacking gettext (from .../gettext_0.17-8_amd64.deb) ... Selecting previously deselected package intltool-debian. Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ... Selecting previously deselected package po-debconf. Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ... Selecting previously deselected package debhelper. Unpacking debhelper (from .../debhelper_7.4.11_all.deb) ... Selecting previously deselected package libdevel-symdump-perl. Unpacking libdevel-symdump-perl (from .../libdevel-symdump-perl_2.08-2_all.deb) ... Selecting previously deselected package libio-stringy-perl. Unpacking libio-stringy-perl (from .../libio-stringy-perl_2.110-4_all.deb) ... Selecting previously deselected package libpod-coverage-perl. Unpacking libpod-coverage-perl (from .../libpod-coverage-perl_0.20-1_all.deb) ... Selecting previously deselected package libtest-pod-coverage-perl. Unpacking libtest-pod-coverage-perl (from .../libtest-pod-coverage-perl_1.08-3_all.deb) ... Selecting previously deselected package libtest-pod-perl. Unpacking libtest-pod-perl (from .../libtest-pod-perl_1.40-1_all.deb) ... Setting up bsdmainutils (8.0.5) ... update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write) in auto mode. Setting up groff-base (1.20.1-6) ... Setting up man-db (2.5.6-5) ... Building database of manual pages ... Setting up libmagic1 (5.03-5) ... Setting up file (5.03-5) ... Setting up gettext-base (0.17-8) ... Setting up libpcre3 (7.8-3) ... Setting up libxml2 (2.7.6.dfsg-1) ... Setting up html2text (1.3.2a-14) ... Setting up libglib2.0-0 (2.22.3-2) ... Setting up libcroco3 (0.6.2-1) ... Setting up gettext (0.17-8) ... Setting up intltool-debian (0.35.0+20060710.1) ... Setting up po-debconf (1.0.16) ... Setting up debhelper (7.4.11) ... Setting up libdevel-symdump-perl (2.08-2) ... Setting up libio-stringy-perl (2.110-4) ... Setting up libpod-coverage-perl (0.20-1) ... Setting up libtest-pod-coverage-perl (1.08-3) ... Setting up libtest-pod-perl (1.40-1) ... Removing negative dependencies: Checking correctness of source dependencies... Kernel: Linux 2.6.26-2-amd64 amd64 (x86_64) Toolchain package versions: libc6-dev_2.10.2-5 linux-libc-dev_2.6.32-4 g++-4.4_4.4.2-8 gcc-4.4_4.4.2-8 binutils_2.20-4 libstdc++6_4.4.2-8 libstdc++6-4.4-dev_4.4.2-8 ┌──────────────────────────────────────────────────────────────────────────────┐ │ Build │ └──────────────────────────────────────────────────────────────────────────────┘ Unpack source ───────────── gpgv: keyblock resource `/home/user/.gnupg/trustedkeys.gpg': file open error gpgv: Signature made Tue Dec 29 16:45:17 2009 CET using DSA key ID 9725F63B gpgv: Can't check signature: public key not found dpkg-source: warning: failed to verify signature on ./libbsd-resource-perl_1.2903-2.dsc dpkg-source: info: extracting libbsd-resource-perl in libbsd-resource-perl-1.2903 dpkg-source: info: unpacking libbsd-resource-perl_1.2903.orig.tar.gz dpkg-source: info: applying libbsd-resource-perl_1.2903-2.diff.gz Check disc space ──────────────── dpkg-buildpackage ───────────────── dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package libbsd-resource-perl dpkg-buildpackage: source version 1.2903-2 dpkg-buildpackage: source changed by Damyan Ivanov <d...@debian.org> dpkg-buildpackage: host architecture amd64 /usr/bin/fakeroot debian/rules clean dh clean dh_testdir dh_auto_clean dh_clean dpkg-source -b libbsd-resource-perl-1.2903 dpkg-source: info: using source format `1.0' dpkg-source: info: building libbsd-resource-perl using existing libbsd-resource-perl_1.2903.orig.tar.gz dpkg-source: info: building libbsd-resource-perl in libbsd-resource-perl_1.2903-2.diff.gz dpkg-source: info: building libbsd-resource-perl in libbsd-resource-perl_1.2903-2.dsc debian/rules build dh build dh_testdir dh_auto_configure Configuring BSD::Resource... Checking whether you have certain header files... You do have <sys/resource.h>. Excellent. Checking to see whether you have rlim_t... You seem to have rlim_t defined (which is nice). Checking if your kit is complete... Looks good 'CREATE_PACKLIST' is not a known MakeMaker parameter name. Writing Makefile for BSD::Resource Done configuring BSD::Resource. Now you may issue 'make'. Do not forget also 'make test'. If some tests fail, please rerun the tests (see INSTALL). dh_auto_build make[1]: Entering directory `/build/user-libbsd-resource-perl_1.2903-2-amd64-KsnMCK/libbsd-resource-perl-1.2903' cp Resource.pm blib/lib/BSD/Resource.pm AutoSplitting blib/lib/BSD/Resource.pm (blib/lib/auto/BSD/Resource) /usr/bin/perl /usr/share/perl/5.10/ExtUtils/xsubpp -typemap /usr/share/perl/5.10/ExtUtils/typemap Resource.xs > Resource.xsc && mv Resource.xsc Resource.c cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\"1.2903\" -DXS_VERSION=\"1.2903\" -fPIC "-I/usr/lib/perl/5.10/CORE" -DRlim_t=rlim_t Resource.c Running Mkbootstrap for BSD::Resource () chmod 644 Resource.bs rm -f blib/arch/auto/BSD/Resource/Resource.so cc -shared -O2 -g -L/usr/local/lib -fstack-protector Resource.o -o blib/arch/auto/BSD/Resource/Resource.so \ \ chmod 755 blib/arch/auto/BSD/Resource/Resource.so cp Resource.bs blib/arch/auto/BSD/Resource/Resource.bs chmod 644 blib/arch/auto/BSD/Resource/Resource.bs Manifying blib/man3/BSD::Resource.3pm make[1]: Leaving directory `/build/user-libbsd-resource-perl_1.2903-2-amd64-KsnMCK/libbsd-resource-perl-1.2903' debian/rules override_dh_auto_test make[1]: Entering directory `/build/user-libbsd-resource-perl_1.2903-2-amd64-KsnMCK/libbsd-resource-perl-1.2903' prove --blib --verbose t/getpriority.t ... 1..3 # nowprio1 = 1 ok 1 # nowprio2 = 1 ok 2 # nowprio3 = 1 ok 3 ok t/getrlimit.t ..... 1..15 # k = RLIMIT_CPU RLIMIT_OPEN_MAX RLIMIT_LOCKS RLIMIT_VMEM RLIMIT_FSIZE RLIMIT_STACK RLIMIT_MEMLOCK RLIMIT_NPROC RLIMIT_DATA RLIMIT_NOFILE RLIMIT_OFILE RLIMIT_RSS RLIMIT_AS RLIMIT_CORE, v = 0 7 10 9 1 3 8 6 2 7 7 5 9 4 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok t/getrusage.t ..... 1..2 # getrusage # ru = 3.336208 0.024001 0 0 0 0 1002 0 0 0 0 0 0 0 1 58 # times # tsu = 3.33, tss = 0.02 # sleep(6) # real = 9 # ruu = 3.336208, tsu = 3.33 # rus = 0.024001, tss = 0.02 # ruc = 3.360209, tsc = 3.35 # real = 9 # far: a = 3.336208, b = 3.33, r = 0.2 # far: abs(a/b-1) = 0.00186426426426434 # far: a = 0.024001, b = 0.02, r = 0.4 # far: abs(a/b-1) = 0.20005 ok 1 # @ru = (6.008375 0.028001 0 0 0 0 1057 0 0 0 0 0 0 0 2 99) # far: a = 6.008375, b = 6.008375, r = 0.2 # far: abs(a/b-1) = 0 # far: a = 0.028001, b = 0.028001, r = 0.4 # far: abs(a/b-1) = 0 ok 2 ok t/pod-coverage.t .. 1..1 ok 1 - Pod coverage on BSD::Resource ok t/pod.t ........... 1..1 ok 1 - blib/lib/BSD/Resource.pm ok t/setpriority.t ... 1..3 # nice = 0 # origprio = 1 () # gotlower = 1 () # lowerprio = 2 () ok 1 ok 2 # skipped (origprio = 1) ok 3 # skipped (euid = 1001) ok t/setrlimit.t ..... 1..14 # lim = RLIMIT_AS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 1 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_CORE # old_soft = 0, old_hard = -1 # try_soft = 0, try_hard = -1 # setrlimit(RLIMIT_CORE, 0) = OK # getrlimit(RLIMIT_CORE) = 0 ok 2 # 0 <= 0 # lim = RLIMIT_CPU # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 3 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_DATA # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 4 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_FSIZE # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 5 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_LOCKS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 6 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_MEMLOCK # old_soft = 32768, old_hard = 32768 # try_soft = 24576, try_hard = 24576 # setrlimit(RLIMIT_MEMLOCK, 24576) = OK # getrlimit(RLIMIT_MEMLOCK) = 24576 ok 7 # 24576 <= 24576 # lim = RLIMIT_NOFILE # old_soft = 1024, old_hard = 1024 # try_soft = 768, try_hard = 768 # setrlimit(RLIMIT_NOFILE, 768) = OK # getrlimit(RLIMIT_NOFILE) = 768 ok 8 # 768 <= 768 # lim = RLIMIT_NPROC # old_soft = 139264, old_hard = 139264 # try_soft = 104448, try_hard = 104448 # setrlimit(RLIMIT_NPROC, 104448) = OK # getrlimit(RLIMIT_NPROC) = 104448 ok 9 # 104448 <= 104448 # lim = RLIMIT_OFILE # old_soft = 768, old_hard = 768 # try_soft = 576, try_hard = 576 # setrlimit(RLIMIT_OFILE, 576) = OK # getrlimit(RLIMIT_OFILE) = 576 ok 10 # 576 <= 576 # lim = RLIMIT_OPEN_MAX # old_soft = 576, old_hard = 576 # try_soft = 432, try_hard = 432 # setrlimit(RLIMIT_OPEN_MAX, 432) = OK # getrlimit(RLIMIT_OPEN_MAX) = 432 ok 11 # 432 <= 432 # lim = RLIMIT_RSS # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 12 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_STACK # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 13 # SKIP soft_limit == RLIM_INFINITY # lim = RLIMIT_VMEM # old_soft = -1, old_hard = -1 # try_soft = -1, try_hard = -1 ok 14 # SKIP soft_limit == RLIM_INFINITY ok t/times.t ......... 1..2 # CORE::times() = 5.34 0.01 0 0 # times = 5.344334 0.016001 0 0 # BSD::Resource::times() = 5.344334 0.016001 0 0 # far: a = 5.344334, b = 5.34, r = 0.1 # far: abs(a/b-1) = 0.000811610486891379 # far: a = 0.016001, b = 0.01, r = 0.5 # far: abs(a/b-1) = 0.6001 not ok 1 # far: a = 5.344334, b = 5.344334, r = 0.1 # far: abs(a/b-1) = 0 # far: a = 0.016001, b = 0.016001, r = 0.1 # far: abs(a/b-1) = 0 # far: a = 0, b = 0, r = 0.1 # far: abs(a/b-1) = - # far: a = 0, b = 0, r = 0.1 # far: abs(a/b-1) = - ok 2 Failed 1/2 subtests Test Summary Report ------------------- t/times.t (Wstat: 0 Tests: 2 Failed: 1) Failed test: 1 Files=8, Tests=41, 19 wallclock secs ( 0.03 usr 0.02 sys + 11.50 cusr 0.07 csys = 11.62 CPU) Result: FAIL make[1]: *** [override_dh_auto_test] Error 1 make[1]: Leaving directory `/build/user-libbsd-resource-perl_1.2903-2-amd64-KsnMCK/libbsd-resource-perl-1.2903' make: *** [build] Error 2 dpkg-buildpackage: error: debian/rules build gave error exit status 2 ──────────────────────────────────────────────────────────────────────────────── Build finished at 20100108-2035 FAILED [dpkg-buildpackage died] Purging /var/lib/schroot/mount/lsid64-c3d92897-4892-491e-a3cf-7b13944af0dc/build/user-libbsd-resource-perl_1.2903-2-amd64-KsnMCK -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
