Bug#540467: marked as done (fails to install, trying to overwrite other packages files)

Debian Bug Tracking System Sat, 29 Aug 2009 01:37:52 -0700

Your message dated Sat, 29 Aug 2009 08:00:03 +0000
with message-id <[email protected]>
and subject line Bug#530781: fixed in cyrus-sasl2 2.1.23.dfsg1-1.1
has caused the Debian Bug report #530781,
regarding fails to install, trying to overwrite other packages files
to be marked as done.


This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
530781: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=530781
Debian Bug Tracking System
Contact [email protected] with problems

--- Begin Message ---

Package: cyrus-sasl2-heimdal-dbg
Version: 2.1.23.dfsg1-1
Severity: serious
User: [email protected]
Usertags: piuparts piuparts.d.o

Hi, 

during a test with piuparts I noticed your package failed to install because 
it tries to overwrite other packages files without declaring a replaces 
relation.

See policy 7.6 at 
http://www.debian.org/doc/debian-policy/ch-relationships.html#s-replaces

From the attached log (scroll to the bottom...):

  Unpacking cyrus-sasl2-heimdal-dbg 
(from .../cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb) ...
  Adding `diversion of /usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.22 
to /usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.22.mit by 
cyrus-sasl2-heimdal-dbg'
  dpkg: error 
processing 
/var/cache/apt/archives/cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb 
(--unpack):
   trying to overwrite `/usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.23', 
which is also in package cyrus-sasl2-dbg
  Errors were encountered while processing:
   /var/cache/apt/archives/cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb
  E: Sub-process /usr/bin/dpkg returned an error code (1)


regards,
        Holger

Start: 2009-07-24 01:19:23 UTC

Package: cyrus-sasl2-heimdal-dbg
Priority: extra
Section: debug
Installed-Size: 124
Maintainer: Debian Cyrus SASL Team <[email protected]>
Architecture: amd64
Source: cyrus-sasl2-heimdal
Version: 2.1.23.dfsg1-1
Depends: cyrus-sasl2-dbg (>= 2.1.23.dfsg1-1), cyrus-sasl2-dbg (<< 2.1.23.dfsg1-1.), libsasl2-modules-gssapi-heimdal (= 2.1.23.dfsg1-1)
Filename: pool/main/c/cyrus-sasl2-heimdal/cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb
Size: 69104
MD5sum: 624049beeaf4e727365ed77c51e7f00e
SHA1: 29cafb32885ebb590d37ad935fede952b4502ad1
SHA256: d5573f02e48b0cb14e59ec10cea82ddfc7e18b695921afc11d32b82786d6d783
Description: Debugging symbols for Cyrus SASL
 This is the Cyrus SASL API implementation, version 2. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package contains the debugging symbols for the Cyrus SASL Heimdal
 GSSAPI modules package (libsasl2-modules-gssapi-heimdal). The debugging
 symbols can be useful when investigating crashes in the SASL library or
 tools. You may be asked to install this package if you encounter such a
 crash.
Homepage: http://asg.web.cmu.edu/sasl/sasl-library.html
Tag: implemented-in::c, role::debug-symbols, security::authentication

Executing: sudo /org/piuparts.debian.org/sbin/piuparts --no-symlinks --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad squeeze -b squeeze.tar.gz --mirror http://piatti.debian.org/debian/ cyrus-sasl2-heimdal-dbg
Guessed: debian
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: To quickly glance what went wrong, scroll down to the bottom of this logfile.
0m0.0s INFO: FAQ available at http://wiki.debian.org/piuparts/FAQ
0m0.0s INFO: ------------------------------------------------------------------------------
0m0.0s INFO: piuparts version 0.36~20090709 starting up.
0m0.0s INFO: Command line arguments: /org/piuparts.debian.org/sbin/piuparts --no-symlinks --scriptsdir /etc/piuparts/scripts/ --tmpdir /org/piuparts.debian.org/tmp -ad squeeze -b squeeze.tar.gz --mirror http://piatti.debian.org/debian/ cyrus-sasl2-heimdal-dbg
0m0.0s INFO: Running on: Linux piatti 2.6.30.2-dsa-amd64 #1 SMP Mon Jul 20 13:37:47 CEST 2009 x86_64
0m0.0s DEBUG: Created temporary directory /org/piuparts.debian.org/tmp/tmpV4aQd7
0m0.0s DEBUG: Unpacking squeeze.tar.gz into /org/piuparts.debian.org/tmp/tmpV4aQd7
0m0.0s DEBUG: Starting command: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpV4aQd7', '-zxf', 'squeeze.tar.gz']
0m2.3s DEBUG: Command ok: ['tar', '-C', '/org/piuparts.debian.org/tmp/tmpV4aQd7', '-zxf', 'squeeze.tar.gz']
0m2.3s DEBUG: Created policy-rc.d and chmodded it.
0m2.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', 'update']
0m4.4s DUMP: 
  Get:1 http://piatti.debian.org squeeze Release.gpg [835B]
  Get:2 http://piatti.debian.org squeeze Release [78.3kB]
  Ign http://piatti.debian.org squeeze/main Packages/DiffIndex
  Ign http://piatti.debian.org squeeze/contrib Packages/DiffIndex
  Ign http://piatti.debian.org squeeze/non-free Packages/DiffIndex
  Get:3 http://piatti.debian.org squeeze/main Packages [7602kB]
  Get:4 http://piatti.debian.org squeeze/contrib Packages [68.0kB]
  Get:5 http://piatti.debian.org squeeze/non-free Packages [118kB]
  Fetched 7867kB in 1s (6872kB/s)
  Reading package lists...
0m4.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', 'update']
0m4.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'mount', '-t', 'proc', 'proc', '/proc']
0m4.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'mount', '-t', 'proc', 'proc', '/proc']
0m4.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', '-yf', 'upgrade']
0m22.1s DUMP: 
  Reading package lists...
  Building dependency tree...
  Reading state information...
  The following packages have been kept back:
    gcc-4.3-base libgcc1 libstdc++6
  The following packages will be upgraded:
    apt bsdutils coreutils debconf debconf-i18n debianutils diff dpkg findutils
    initscripts libacl1 libattr1 libbz2-1.0 libc6 libdb4.7 libncurses5
    libselinux1 libsepol1 libtext-charwidth-perl libtext-iconv-perl
    libtext-wrapi18n-perl login mktemp mount ncurses-base ncurses-bin passwd
    perl-base sed sysv-rc sysvinit sysvinit-utils tar tzdata util-linux
  35 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.
  Need to get 22.7MB of archives.
  After this operation, 373kB disk space will be freed.
  WARNING: The following packages cannot be authenticated!
    coreutils debianutils diff dpkg findutils login mktemp mount ncurses-bin
    perl-base sed libc6 libselinux1 libsepol1 sysvinit tar libtext-iconv-perl
    libtext-charwidth-perl libtext-wrapi18n-perl debconf-i18n debconf tzdata
    util-linux bsdutils libncurses5 ncurses-base sysvinit-utils apt libbz2-1.0
    initscripts libattr1 libacl1 passwd sysv-rc libdb4.7
  Authentication warning overridden.
  Get:1 http://piatti.debian.org squeeze/main coreutils 7.4-2 [4883kB]
  Get:2 http://piatti.debian.org squeeze/main debianutils 3.2 [48.9kB]
  Get:3 http://piatti.debian.org squeeze/main diff 2.8.1-13 [193kB]
  Get:4 http://piatti.debian.org squeeze/main dpkg 1.15.3.1 [2211kB]
  Get:5 http://piatti.debian.org squeeze/main findutils 4.4.2-1 [689kB]
  Get:6 http://piatti.debian.org squeeze/main login 1:4.1.4.1-1 [758kB]
  Get:7 http://piatti.debian.org squeeze/main mktemp 7.4-2 [13.9kB]
  Get:8 http://piatti.debian.org squeeze/main mount 2.15.1~rc1-1 [164kB]
  Get:9 http://piatti.debian.org squeeze/main ncurses-bin 5.7+20090523-1 [308kB]
  Get:10 http://piatti.debian.org squeeze/main perl-base 5.10.0-24 [1043kB]
  Get:11 http://piatti.debian.org squeeze/main sed 4.2-1 [259kB]
  Get:12 http://piatti.debian.org squeeze/main libc6 2.9-12 [4938kB]
  Get:13 http://piatti.debian.org squeeze/main libselinux1 2.0.82-1 [81.7kB]
  Get:14 http://piatti.debian.org squeeze/main libsepol1 2.0.36-1 [127kB]
  Get:15 http://piatti.debian.org squeeze/main sysvinit 2.86.ds1-65 [110kB]
  Get:16 http://piatti.debian.org squeeze/main tar 1.22-1.1 [877kB]
  Get:17 http://piatti.debian.org squeeze/main libtext-iconv-perl 1.7-2 [18.5kB]
  Get:18 http://piatti.debian.org squeeze/main libtext-charwidth-perl 0.04-6 [11.9kB]
  Get:19 http://piatti.debian.org squeeze/main libtext-wrapi18n-perl 0.06-7 [9004B]
  Get:20 http://piatti.debian.org squeeze/main debconf-i18n 1.5.27 [183kB]
  Get:21 http://piatti.debian.org squeeze/main debconf 1.5.27 [151kB]
  Get:22 http://piatti.debian.org squeeze/main tzdata 2009j-1 [770kB]
  Get:23 http://piatti.debian.org squeeze/main util-linux 2.15.1~rc1-1 [588kB]
  Get:24 http://piatti.debian.org squeeze/main bsdutils 1:2.15.1~rc1-1 [74.3kB]
  Get:25 http://piatti.debian.org squeeze/main libncurses5 5.7+20090523-1 [356kB]
  Get:26 http://piatti.debian.org squeeze/main ncurses-base 5.7+20090523-1 [180kB]
  Get:27 http://piatti.debian.org squeeze/main sysvinit-utils 2.86.ds1-65 [94.7kB]
  Get:28 http://piatti.debian.org squeeze/main apt 0.7.21 [1622kB]
  Get:29 http://piatti.debian.org squeeze/main libbz2-1.0 1.0.5-2 [44.8kB]
  Get:30 http://piatti.debian.org squeeze/main initscripts 2.86.ds1-65 [76.1kB]
  Get:31 http://piatti.debian.org squeeze/main libattr1 1:2.4.43-3 [12.3kB]
  Get:32 http://piatti.debian.org squeeze/main libacl1 2.2.47-3 [19.1kB]
  Get:33 http://piatti.debian.org squeeze/main passwd 1:4.1.4.1-1 [1047kB]
  Get:34 http://piatti.debian.org squeeze/main sysv-rc 2.86.ds1-65 [67.6kB]
  Get:35 http://piatti.debian.org squeeze/main libdb4.7 4.7.25-7 [650kB]
  debconf: delaying package configuration, since apt-utils is not installed
  Fetched 22.7MB in 0s (46.0MB/s)
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5826 files and directories currently installed.)
  Preparing to replace coreutils 7.2-1 (using .../coreutils_7.4-2_amd64.deb) ...
  Unpacking replacement coreutils ...
  Replacing files in old package mktemp ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up coreutils (7.4-2) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5828 files and directories currently installed.)
  Preparing to replace debianutils 3.0.1 (using .../debianutils_3.2_amd64.deb) ...
  Unpacking replacement debianutils ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up debianutils (3.2) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5828 files and directories currently installed.)
  Preparing to replace diff 2.8.1-12 (using .../diff_2.8.1-13_amd64.deb) ...
  Unpacking replacement diff ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up diff (2.8.1-13) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5828 files and directories currently installed.)
  Preparing to replace dpkg 1.14.26 (using .../dpkg_1.15.3.1_amd64.deb) ...
  Unpacking replacement dpkg ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up dpkg (1.15.3.1) ...
  Installing new version of config file /etc/logrotate.d/dpkg ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5825 files and directories currently installed.)
  Preparing to replace findutils 4.4.0-3 (using .../findutils_4.4.2-1_amd64.deb) ...
  Unpacking replacement findutils ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up findutils (4.4.2-1) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5827 files and directories currently installed.)
  Preparing to replace login 1:4.1.3.1-1 (using .../login_1%3a4.1.4.1-1_amd64.deb) ...
  Unpacking replacement login ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up login (1:4.1.4.1-1) ...
  Installing new version of config file /etc/login.defs ...
  Installing new version of config file /etc/securetty ...
  Installing new version of config file /etc/pam.d/login ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5826 files and directories currently installed.)
  Preparing to replace mktemp 1.6-4 (using .../archives/mktemp_7.4-2_all.deb) ...
  Unpacking replacement mktemp ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up mktemp (7.4-2) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5826 files and directories currently installed.)
  Preparing to replace mount 2.13.1.1-1 (using .../mount_2.15.1~rc1-1_amd64.deb) ...
  Unpacking replacement mount ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up mount (2.15.1~rc1-1) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5826 files and directories currently installed.)
  Preparing to replace ncurses-bin 5.7+20090404-1 (using .../ncurses-bin_5.7+20090523-1_amd64.deb) ...
  Unpacking replacement ncurses-bin ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up ncurses-bin (5.7+20090523-1) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5826 files and directories currently installed.)
  Preparing to replace perl-base 5.10.0-19 (using .../perl-base_5.10.0-24_amd64.deb) ...
  Unpacking replacement perl-base ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up perl-base (5.10.0-24) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5828 files and directories currently installed.)
  Preparing to replace sed 4.1.5-8 (using .../archives/sed_4.2-1_amd64.deb) ...
  Unpacking replacement sed ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up sed (4.2-1) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5831 files and directories currently installed.)
  Preparing to replace libc6 2.9-4 (using .../libc6_2.9-12_amd64.deb) ...
  Checking for services that may need to be restarted...
  Checking init scripts...
  Unpacking replacement libc6 ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libc6 (2.9-12) ...
  Installing new version of config file /etc/init.d/glibc.sh ...
  Checking for services that may need to be restarted...
  Checking init scripts...
  Nothing to restart.
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5831 files and directories currently installed.)
  Preparing to replace libselinux1 2.0.71-1 (using .../libselinux1_2.0.82-1_amd64.deb) ...
  Unpacking replacement libselinux1 ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libselinux1 (2.0.82-1) ...
  init: timeout opening/writing control channel /dev/initctl
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5831 files and directories currently installed.)
  Preparing to replace libsepol1 2.0.32-1 (using .../libsepol1_2.0.36-1_amd64.deb) ...
  Unpacking replacement libsepol1 ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libsepol1 (2.0.36-1) ...
  telinit: timeout opening/writing control channel /dev/initctl
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5831 files and directories currently installed.)
  Preparing to replace sysvinit 2.86.ds1-61 (using .../sysvinit_2.86.ds1-65_amd64.deb) ...
  Unpacking replacement sysvinit ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up sysvinit (2.86.ds1-65) ...
  init: timeout opening/writing control channel /dev/initctl
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5830 files and directories currently installed.)
  Preparing to replace tar 1.22-1 (using .../tar_1.22-1.1_amd64.deb) ...
  Unpacking replacement tar ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up tar (1.22-1.1) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5830 files and directories currently installed.)
  Preparing to replace libtext-iconv-perl 1.7-1+b1 (using .../libtext-iconv-perl_1.7-2_amd64.deb) ...
  Unpacking replacement libtext-iconv-perl ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libtext-iconv-perl (1.7-2) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5831 files and directories currently installed.)
  Preparing to replace libtext-charwidth-perl 0.04-5+b1 (using .../libtext-charwidth-perl_0.04-6_amd64.deb) ...
  Unpacking replacement libtext-charwidth-perl ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libtext-charwidth-perl (0.04-6) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5831 files and directories currently installed.)
  Preparing to replace libtext-wrapi18n-perl 0.06-6 (using .../libtext-wrapi18n-perl_0.06-7_all.deb) ...
  Unpacking replacement libtext-wrapi18n-perl ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libtext-wrapi18n-perl (0.06-7) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5831 files and directories currently installed.)
  Preparing to replace debconf-i18n 1.5.26 (using .../debconf-i18n_1.5.27_all.deb) ...
  Unpacking replacement debconf-i18n ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up debconf-i18n (1.5.27) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5835 files and directories currently installed.)
  Preparing to replace debconf 1.5.26 (using .../debconf_1.5.27_all.deb) ...
  Unpacking replacement debconf ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up debconf (1.5.27) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5835 files and directories currently installed.)
  Preparing to replace tzdata 2009e-1 (using .../tzdata_2009j-1_all.deb) ...
  Unpacking replacement tzdata ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up tzdata (2009j-1) ...
  
  Current default timezone: 'Etc/UTC'
  Local time is now:      Fri Jul 24 01:19:43 UTC 2009.
  Universal Time is now:  Fri Jul 24 01:19:43 UTC 2009.
  Run 'dpkg-reconfigure tzdata' if you wish to change it.
  
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5838 files and directories currently installed.)
  Preparing to replace util-linux 2.13.1.1-1 (using .../util-linux_2.15.1~rc1-1_amd64.deb) ...
  Unpacking replacement util-linux ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up util-linux (2.15.1~rc1-1) ...
  Installing new version of config file /etc/init.d/hwclockfirst.sh ...
  Installing new version of config file /etc/init.d/hwclock.sh ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5845 files and directories currently installed.)
  Preparing to replace bsdutils 1:2.13.1.1-1 (using .../bsdutils_1%3a2.15.1~rc1-1_amd64.deb) ...
  Unpacking replacement bsdutils ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up bsdutils (1:2.15.1~rc1-1) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5845 files and directories currently installed.)
  Preparing to replace libncurses5 5.7+20090404-1 (using .../libncurses5_5.7+20090523-1_amd64.deb) ...
  Unpacking replacement libncurses5 ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libncurses5 (5.7+20090523-1) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5845 files and directories currently installed.)
  Preparing to replace ncurses-base 5.7+20090404-1 (using .../ncurses-base_5.7+20090523-1_all.deb) ...
  Unpacking replacement ncurses-base ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up ncurses-base (5.7+20090523-1) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5845 files and directories currently installed.)
  Preparing to replace sysvinit-utils 2.86.ds1-61 (using .../sysvinit-utils_2.86.ds1-65_amd64.deb) ...
  Unpacking replacement sysvinit-utils ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up sysvinit-utils (2.86.ds1-65) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5851 files and directories currently installed.)
  Preparing to replace apt 0.7.20.2 (using .../archives/apt_0.7.21_amd64.deb) ...
  Unpacking replacement apt ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up apt (0.7.21) ...
  Installing new version of config file /etc/cron.daily/apt ...
  gpg: key 6070D3A1: "Debian Archive Automatic Signing Key (4.0/etch) <[email protected]>" not changed
  gpg: key ADB11277: "Etch Stable Release Key <[email protected]>" not changed
  gpg: key BBE55AB3: "Debian-Volatile Archive Automatic Signing Key (4.0/etch)" not changed
  gpg: key F42584E6: "Lenny Stable Release Key <[email protected]>" not changed
  gpg: key 55BE302B: "Debian Archive Automatic Signing Key (5.0/lenny) <[email protected]>" not changed
  gpg: key 6D849617: "Debian-Volatile Archive Automatic Signing Key (5.0/lenny)" not changed
  gpg: Total number processed: 6
  gpg:              unchanged: 6
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5851 files and directories currently installed.)
  Preparing to replace libbz2-1.0 1.0.5-1 (using .../libbz2-1.0_1.0.5-2_amd64.deb) ...
  Unpacking replacement libbz2-1.0 ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libbz2-1.0 (1.0.5-2) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5851 files and directories currently installed.)
  Preparing to replace initscripts 2.86.ds1-61 (using .../initscripts_2.86.ds1-65_amd64.deb) ...
  Unpacking replacement initscripts ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up initscripts (2.86.ds1-65) ...
  Installing new version of config file /etc/init.d/bootlogd ...
  Installing new version of config file /etc/init.d/bootmisc.sh ...
  Installing new version of config file /etc/init.d/checkfs.sh ...
  Installing new version of config file /etc/init.d/checkroot.sh ...
  Installing new version of config file /etc/init.d/mountoverflowtmp ...
  Installing new version of config file /etc/init.d/mountkernfs.sh ...
  Installing new version of config file /etc/init.d/rc.local ...
  Installing new version of config file /etc/init.d/umountfs ...
  Installing new version of config file /etc/init.d/umountnfs.sh ...
  Installing new version of config file /etc/init.d/urandom ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5853 files and directories currently installed.)
  Preparing to replace libattr1 1:2.4.43-2 (using .../libattr1_1%3a2.4.43-3_amd64.deb) ...
  Unpacking replacement libattr1 ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libattr1 (1:2.4.43-3) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5853 files and directories currently installed.)
  Preparing to replace libacl1 2.2.47-2 (using .../libacl1_2.2.47-3_amd64.deb) ...
  Unpacking replacement libacl1 ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libacl1 (2.2.47-3) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5853 files and directories currently installed.)
  Preparing to replace passwd 1:4.1.3.1-1 (using .../passwd_1%3a4.1.4.1-1_amd64.deb) ...
  Unpacking replacement passwd ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up passwd (1:4.1.4.1-1) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5854 files and directories currently installed.)
  Preparing to replace sysv-rc 2.86.ds1-61 (using .../sysv-rc_2.86.ds1-65_all.deb) ...
  Unpacking replacement sysv-rc ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up sysv-rc (2.86.ds1-65) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5856 files and directories currently installed.)
  Preparing to replace libdb4.7 4.7.25-6 (using .../libdb4.7_4.7.25-7_amd64.deb) ...
  Unpacking replacement libdb4.7 ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up libdb4.7 (4.7.25-7) ...
0m22.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', '-yf', 'upgrade']
0m22.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', 'install', 'debfoster']
0m23.6s DUMP: 
  Reading package lists...
  Building dependency tree...
  Reading state information...
  The following NEW packages will be installed:
    debfoster
  0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded.
  Need to get 39.6kB of archives.
  After this operation, 123kB of additional disk space will be used.
  WARNING: The following packages cannot be authenticated!
    debfoster
  Authentication warning overridden.
  Get:1 http://piatti.debian.org squeeze/main debfoster 2.7-1 [39.6kB]
  debconf: delaying package configuration, since apt-utils is not installed
  Fetched 39.6kB in 0s (0B/s)
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Selecting previously deselected package debfoster.
  (Reading database ... 5856 files and directories currently installed.)
  Unpacking debfoster (from .../debfoster_2.7-1_amd64.deb) ...
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Setting up debfoster (2.7-1) ...
0m23.6s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', 'install', 'debfoster']
0m23.6s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'debfoster', '-o', 'MaxPriority=required', '-o', 'UseRecommends=no', '-f', '-n', 'apt', 'debfoster']
0m24.3s DUMP: 
  Reading package lists...
  Building dependency tree...
  Reading state information...
  The following packages will be REMOVED:
    mktemp*
  0 upgraded, 0 newly installed, 1 to remove and 3 not upgraded.
  After this operation, 20.5kB disk space will be freed.
  Can not write log, openpty() failed (/dev/pts not mounted?)
  (Reading database ... 5870 files and directories currently installed.)
  Removing mktemp ...
0m24.3s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'debfoster', '-o', 'MaxPriority=required', '-o', 'UseRecommends=no', '-f', '-n', 'apt', 'debfoster']
0m24.3s DEBUG: Removing /org/piuparts.debian.org/tmp/tmpV4aQd7/var/lib/debfoster/keepers
0m24.3s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'dpkg', '--purge', 'debfoster']
0m24.4s DUMP: 
  (Reading database ... 5866 files and directories currently installed.)
  Removing debfoster ...
  Purging configuration files for debfoster ...
0m24.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'dpkg', '--purge', 'debfoster']
0m24.4s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', 'clean']
0m24.4s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', 'clean']
0m24.4s DEBUG: Copying scriptsdir to /org/piuparts.debian.org/tmp/tmpV4aQd7/tmp/scripts/
0m25.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'dpkg', '--get-selections', '*']
0m25.1s DUMP: 
  adduser						purge
  apt						install
  apt-utils					purge
  aptitude					purge
  base-files					install
  base-passwd					install
  bash						install
  bsdmainutils					purge
  bsdutils					install
  coreutils					install
  cpio						purge
  cron						purge
  debconf						install
  debconf-i18n					install
  debfoster					purge
  debian-archive-keyring				install
  debianutils					install
  dhcp3-client					purge
  dhcp3-common					purge
  diff						install
  dmidecode					purge
  dpkg						install
  e2fslibs					install
  e2fsprogs					install
  ed						purge
  findutils					install
  gcc-4.2-base					purge
  gcc-4.3-base					install
  gnupg						install
  gpgv						install
  grep						install
  groff-base					purge
  gzip						install
  hostname					install
  ifupdown					purge
  info						purge
  initscripts					install
  iproute						purge
  iptables					purge
  iputils-ping					purge
  libacl1						install
  libattr1					install
  libblkid1					install
  libbz2-1.0					install
  libc6						install
  libcomerr2					install
  libconsole					purge
  libcwidget3					purge
  libdb4.6					purge
  libdb4.7					install
  libdevmapper1.02.1				purge
  libept0						purge
  libgc1c2					install
  libgcc1						install
  libgcrypt11					purge
  libgdbm3					purge
  libgnutls26					purge
  libgpg-error0					purge
  liblocale-gettext-perl				install
  libncurses5					install
  libncursesw5					purge
  libnewt0.52					purge
  libpam-modules					install
  libpam-runtime					install
  libpam0g					install
  libpopt0					purge
  libreadline5					install
  libsasl2-2					purge
  libselinux1					install
  libsepol1					install
  libsigc++-2.0-0c2a				purge
  libslang2					install
  libss2						install
  libssl0.9.8					purge
  libstdc++6					install
  libtasn1-3					purge
  libtext-charwidth-perl				install
  libtext-iconv-perl				install
  libtext-wrapi18n-perl				install
  libusb-0.1-4					install
  libusb-1.0-0					purge
  libuuid1					install
  libvolume-id1					purge
  libwrap0					purge
  libxapian15					purge
  login						install
  logrotate					purge
  lsb-base					install
  lzma						install
  makedev						purge
  man-db						purge
  manpages					purge
  mawk						install
  mktemp						purge
  module-init-tools				purge
  mount						install
  nano						purge
  ncurses-base					install
  ncurses-bin					install
  net-tools					purge
  netbase						purge
  netcat-traditional				purge
  passwd						install
  perl-base					install
  procps						purge
  readline-common					install
  rsyslog						purge
  sed						install
  sensible-utils					install
  sysv-rc						install
  sysvinit					install
  sysvinit-utils					install
  tar						install
  tasksel						purge
  tasksel-data					purge
  tcpd						purge
  traceroute					purge
  tzdata						install
  udev						purge
  util-linux					install
  vim-common					purge
  vim-tiny					purge
  wget						purge
  whiptail					purge
  zlib1g						install
0m25.1s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'dpkg', '--get-selections', '*']
0m25.1s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', '-y', 'install', 'cyrus-sasl2-heimdal-dbg']
0m26.8s DUMP: 
  Reading package lists...
  Building dependency tree...
  Reading state information...
  The following packages were automatically installed and are no longer required:
    libgc1c2
  Use 'apt-get autoremove' to remove them.
  The following extra packages will be installed:
    cyrus-sasl2-dbg libasn1-8-heimdal libgssapi2-heimdal libheimntlm0-heimdal
    libhx509-3-heimdal libkrb5-25-heimdal libroken18-heimdal libsasl2-2
    libsasl2-modules libsasl2-modules-gssapi-heimdal libssl0.9.8
    libwind0-heimdal
  Suggested packages:
    libsasl2-modules-otp libsasl2-modules-ldap libsasl2-modules-sql
  The following NEW packages will be installed:
    cyrus-sasl2-dbg cyrus-sasl2-heimdal-dbg libasn1-8-heimdal libgssapi2-heimdal
    libheimntlm0-heimdal libhx509-3-heimdal libkrb5-25-heimdal
    libroken18-heimdal libsasl2-2 libsasl2-modules
    libsasl2-modules-gssapi-heimdal libssl0.9.8 libwind0-heimdal
  0 upgraded, 13 newly installed, 0 to remove and 3 not upgraded.
  Need to get 3050kB of archives.
  After this operation, 7971kB of additional disk space will be used.
  WARNING: The following packages cannot be authenticated!
    libsasl2-2 libssl0.9.8 libroken18-heimdal libasn1-8-heimdal libwind0-heimdal
    libhx509-3-heimdal libkrb5-25-heimdal libheimntlm0-heimdal
    libgssapi2-heimdal libsasl2-modules cyrus-sasl2-dbg
    libsasl2-modules-gssapi-heimdal cyrus-sasl2-heimdal-dbg
  Authentication warning overridden.
  Get:1 http://piatti.debian.org squeeze/main libsasl2-2 2.1.23.dfsg1-1 [114kB]
  Get:2 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8k-3 [982kB]
  Get:3 http://piatti.debian.org squeeze/main libroken18-heimdal 1.2.dfsg.1-5 [59.8kB]
  Get:4 http://piatti.debian.org squeeze/main libasn1-8-heimdal 1.2.dfsg.1-5 [205kB]
  Get:5 http://piatti.debian.org squeeze/main libwind0-heimdal 1.2.dfsg.1-5 [93.1kB]
  Get:6 http://piatti.debian.org squeeze/main libhx509-3-heimdal 1.2.dfsg.1-5 [136kB]
  Get:7 http://piatti.debian.org squeeze/main libkrb5-25-heimdal 1.2.dfsg.1-5 [423kB]
  Get:8 http://piatti.debian.org squeeze/main libheimntlm0-heimdal 1.2.dfsg.1-5 [29.8kB]
  Get:9 http://piatti.debian.org squeeze/main libgssapi2-heimdal 1.2.dfsg.1-5 [103kB]
  Get:10 http://piatti.debian.org squeeze/main libsasl2-modules 2.1.23.dfsg1-1 [160kB]
  Get:11 http://piatti.debian.org squeeze/main cyrus-sasl2-dbg 2.1.23.dfsg1-1 [606kB]
  Get:12 http://piatti.debian.org squeeze/main libsasl2-modules-gssapi-heimdal 2.1.23.dfsg1-1 [68.1kB]
  Get:13 http://piatti.debian.org squeeze/main cyrus-sasl2-heimdal-dbg 2.1.23.dfsg1-1 [69.1kB]
  debconf: delaying package configuration, since apt-utils is not installed
  Fetched 3050kB in 0s (16.2MB/s)
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Selecting previously deselected package libsasl2-2.
  (Reading database ... 5852 files and directories currently installed.)
  Unpacking libsasl2-2 (from .../libsasl2-2_2.1.23.dfsg1-1_amd64.deb) ...
  Selecting previously deselected package libssl0.9.8.
  Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8k-3_amd64.deb) ...
  Selecting previously deselected package libroken18-heimdal.
  Unpacking libroken18-heimdal (from .../libroken18-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libasn1-8-heimdal.
  Unpacking libasn1-8-heimdal (from .../libasn1-8-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libwind0-heimdal.
  Unpacking libwind0-heimdal (from .../libwind0-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libhx509-3-heimdal.
  Unpacking libhx509-3-heimdal (from .../libhx509-3-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libkrb5-25-heimdal.
  Unpacking libkrb5-25-heimdal (from .../libkrb5-25-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libheimntlm0-heimdal.
  Unpacking libheimntlm0-heimdal (from .../libheimntlm0-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libgssapi2-heimdal.
  Unpacking libgssapi2-heimdal (from .../libgssapi2-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libsasl2-modules.
  Unpacking libsasl2-modules (from .../libsasl2-modules_2.1.23.dfsg1-1_amd64.deb) ...
  Selecting previously deselected package cyrus-sasl2-dbg.
  Unpacking cyrus-sasl2-dbg (from .../cyrus-sasl2-dbg_2.1.23.dfsg1-1_amd64.deb) ...
  Selecting previously deselected package libsasl2-modules-gssapi-heimdal.
  Unpacking libsasl2-modules-gssapi-heimdal (from .../libsasl2-modules-gssapi-heimdal_2.1.23.dfsg1-1_amd64.deb) ...
  Selecting previously deselected package cyrus-sasl2-heimdal-dbg.
  Unpacking cyrus-sasl2-heimdal-dbg (from .../cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb) ...
  Adding `diversion of /usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.22 to /usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.22.mit by cyrus-sasl2-heimdal-dbg'
  dpkg: error processing /var/cache/apt/archives/cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb (--unpack):
   trying to overwrite `/usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.23', which is also in package cyrus-sasl2-dbg
  Errors were encountered while processing:
   /var/cache/apt/archives/cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb
  E: Sub-process /usr/bin/dpkg returned an error code (1)
0m26.8s ERROR: Command failed (status=100): ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'apt-get', '-y', 'install', 'cyrus-sasl2-heimdal-dbg']
  Reading package lists...
  Building dependency tree...
  Reading state information...
  The following packages were automatically installed and are no longer required:
    libgc1c2
  Use 'apt-get autoremove' to remove them.
  The following extra packages will be installed:
    cyrus-sasl2-dbg libasn1-8-heimdal libgssapi2-heimdal libheimntlm0-heimdal
    libhx509-3-heimdal libkrb5-25-heimdal libroken18-heimdal libsasl2-2
    libsasl2-modules libsasl2-modules-gssapi-heimdal libssl0.9.8
    libwind0-heimdal
  Suggested packages:
    libsasl2-modules-otp libsasl2-modules-ldap libsasl2-modules-sql
  The following NEW packages will be installed:
    cyrus-sasl2-dbg cyrus-sasl2-heimdal-dbg libasn1-8-heimdal libgssapi2-heimdal
    libheimntlm0-heimdal libhx509-3-heimdal libkrb5-25-heimdal
    libroken18-heimdal libsasl2-2 libsasl2-modules
    libsasl2-modules-gssapi-heimdal libssl0.9.8 libwind0-heimdal
  0 upgraded, 13 newly installed, 0 to remove and 3 not upgraded.
  Need to get 3050kB of archives.
  After this operation, 7971kB of additional disk space will be used.
  WARNING: The following packages cannot be authenticated!
    libsasl2-2 libssl0.9.8 libroken18-heimdal libasn1-8-heimdal libwind0-heimdal
    libhx509-3-heimdal libkrb5-25-heimdal libheimntlm0-heimdal
    libgssapi2-heimdal libsasl2-modules cyrus-sasl2-dbg
    libsasl2-modules-gssapi-heimdal cyrus-sasl2-heimdal-dbg
  Authentication warning overridden.
  Get:1 http://piatti.debian.org squeeze/main libsasl2-2 2.1.23.dfsg1-1 [114kB]
  Get:2 http://piatti.debian.org squeeze/main libssl0.9.8 0.9.8k-3 [982kB]
  Get:3 http://piatti.debian.org squeeze/main libroken18-heimdal 1.2.dfsg.1-5 [59.8kB]
  Get:4 http://piatti.debian.org squeeze/main libasn1-8-heimdal 1.2.dfsg.1-5 [205kB]
  Get:5 http://piatti.debian.org squeeze/main libwind0-heimdal 1.2.dfsg.1-5 [93.1kB]
  Get:6 http://piatti.debian.org squeeze/main libhx509-3-heimdal 1.2.dfsg.1-5 [136kB]
  Get:7 http://piatti.debian.org squeeze/main libkrb5-25-heimdal 1.2.dfsg.1-5 [423kB]
  Get:8 http://piatti.debian.org squeeze/main libheimntlm0-heimdal 1.2.dfsg.1-5 [29.8kB]
  Get:9 http://piatti.debian.org squeeze/main libgssapi2-heimdal 1.2.dfsg.1-5 [103kB]
  Get:10 http://piatti.debian.org squeeze/main libsasl2-modules 2.1.23.dfsg1-1 [160kB]
  Get:11 http://piatti.debian.org squeeze/main cyrus-sasl2-dbg 2.1.23.dfsg1-1 [606kB]
  Get:12 http://piatti.debian.org squeeze/main libsasl2-modules-gssapi-heimdal 2.1.23.dfsg1-1 [68.1kB]
  Get:13 http://piatti.debian.org squeeze/main cyrus-sasl2-heimdal-dbg 2.1.23.dfsg1-1 [69.1kB]
  debconf: delaying package configuration, since apt-utils is not installed
  Fetched 3050kB in 0s (16.2MB/s)
  Can not write log, openpty() failed (/dev/pts not mounted?)
  Selecting previously deselected package libsasl2-2.
  (Reading database ... 5852 files and directories currently installed.)
  Unpacking libsasl2-2 (from .../libsasl2-2_2.1.23.dfsg1-1_amd64.deb) ...
  Selecting previously deselected package libssl0.9.8.
  Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8k-3_amd64.deb) ...
  Selecting previously deselected package libroken18-heimdal.
  Unpacking libroken18-heimdal (from .../libroken18-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libasn1-8-heimdal.
  Unpacking libasn1-8-heimdal (from .../libasn1-8-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libwind0-heimdal.
  Unpacking libwind0-heimdal (from .../libwind0-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libhx509-3-heimdal.
  Unpacking libhx509-3-heimdal (from .../libhx509-3-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libkrb5-25-heimdal.
  Unpacking libkrb5-25-heimdal (from .../libkrb5-25-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libheimntlm0-heimdal.
  Unpacking libheimntlm0-heimdal (from .../libheimntlm0-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libgssapi2-heimdal.
  Unpacking libgssapi2-heimdal (from .../libgssapi2-heimdal_1.2.dfsg.1-5_amd64.deb) ...
  Selecting previously deselected package libsasl2-modules.
  Unpacking libsasl2-modules (from .../libsasl2-modules_2.1.23.dfsg1-1_amd64.deb) ...
  Selecting previously deselected package cyrus-sasl2-dbg.
  Unpacking cyrus-sasl2-dbg (from .../cyrus-sasl2-dbg_2.1.23.dfsg1-1_amd64.deb) ...
  Selecting previously deselected package libsasl2-modules-gssapi-heimdal.
  Unpacking libsasl2-modules-gssapi-heimdal (from .../libsasl2-modules-gssapi-heimdal_2.1.23.dfsg1-1_amd64.deb) ...
  Selecting previously deselected package cyrus-sasl2-heimdal-dbg.
  Unpacking cyrus-sasl2-heimdal-dbg (from .../cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb) ...
  Adding `diversion of /usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.22 to /usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.22.mit by cyrus-sasl2-heimdal-dbg'
  dpkg: error processing /var/cache/apt/archives/cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb (--unpack):
   trying to overwrite `/usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.23', which is also in package cyrus-sasl2-dbg
  Errors were encountered while processing:
   /var/cache/apt/archives/cyrus-sasl2-heimdal-dbg_2.1.23.dfsg1-1_amd64.deb
  E: Sub-process /usr/bin/dpkg returned an error code (1)
  
0m26.8s DEBUG: Starting command: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'umount', '/proc']
0m26.8s DEBUG: Command ok: ['chroot', '/org/piuparts.debian.org/tmp/tmpV4aQd7', 'umount', '/proc']
0m27.2s DEBUG: Removed directory tree at /org/piuparts.debian.org/tmp/tmpV4aQd7

End: 2009-07-24 01:19:50 UTC

signature.asc
Description: This is a digitally signed message part.

--- End Message ---

--- Begin Message ---

Source: cyrus-sasl2
Source-Version: 2.1.23.dfsg1-1.1

We believe that the bug you reported is fixed in the latest version of
cyrus-sasl2, which is due to be installed in the Debian FTP archive:

cyrus-sasl2-dbg_2.1.23.dfsg1-1.1_amd64.deb
  to pool/main/c/cyrus-sasl2/cyrus-sasl2-dbg_2.1.23.dfsg1-1.1_amd64.deb
cyrus-sasl2-doc_2.1.23.dfsg1-1.1_all.deb
  to pool/main/c/cyrus-sasl2/cyrus-sasl2-doc_2.1.23.dfsg1-1.1_all.deb
cyrus-sasl2_2.1.23.dfsg1-1.1.diff.gz
  to pool/main/c/cyrus-sasl2/cyrus-sasl2_2.1.23.dfsg1-1.1.diff.gz
cyrus-sasl2_2.1.23.dfsg1-1.1.dsc
  to pool/main/c/cyrus-sasl2/cyrus-sasl2_2.1.23.dfsg1-1.1.dsc
libsasl2-2_2.1.23.dfsg1-1.1_amd64.deb
  to pool/main/c/cyrus-sasl2/libsasl2-2_2.1.23.dfsg1-1.1_amd64.deb
libsasl2-dev_2.1.23.dfsg1-1.1_amd64.deb
  to pool/main/c/cyrus-sasl2/libsasl2-dev_2.1.23.dfsg1-1.1_amd64.deb
libsasl2-modules-gssapi-mit_2.1.23.dfsg1-1.1_amd64.deb
  to 
pool/main/c/cyrus-sasl2/libsasl2-modules-gssapi-mit_2.1.23.dfsg1-1.1_amd64.deb
libsasl2-modules-ldap_2.1.23.dfsg1-1.1_amd64.deb
  to pool/main/c/cyrus-sasl2/libsasl2-modules-ldap_2.1.23.dfsg1-1.1_amd64.deb
libsasl2-modules-otp_2.1.23.dfsg1-1.1_amd64.deb
  to pool/main/c/cyrus-sasl2/libsasl2-modules-otp_2.1.23.dfsg1-1.1_amd64.deb
libsasl2-modules-sql_2.1.23.dfsg1-1.1_amd64.deb
  to pool/main/c/cyrus-sasl2/libsasl2-modules-sql_2.1.23.dfsg1-1.1_amd64.deb
libsasl2-modules_2.1.23.dfsg1-1.1_amd64.deb
  to pool/main/c/cyrus-sasl2/libsasl2-modules_2.1.23.dfsg1-1.1_amd64.deb
sasl2-bin_2.1.23.dfsg1-1.1_amd64.deb
  to pool/main/c/cyrus-sasl2/sasl2-bin_2.1.23.dfsg1-1.1_amd64.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Andreas Barth <[email protected]> (supplier of updated cyrus-sasl2 package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Sat, 29 Aug 2009 11:47:55 +0200
Source: cyrus-sasl2
Binary: sasl2-bin cyrus-sasl2-doc libsasl2-2 libsasl2-modules 
libsasl2-modules-ldap libsasl2-modules-otp libsasl2-modules-sql 
libsasl2-modules-gssapi-mit libsasl2-dev cyrus-sasl2-dbg
Architecture: source all amd64
Version: 2.1.23.dfsg1-1.1
Distribution: unstable
Urgency: medium
Maintainer: Debian Cyrus SASL Team 
<[email protected]>
Changed-By: Andreas Barth <[email protected]>
Description: 
 cyrus-sasl2-dbg - Cyrus SASL - debugging symbols
 cyrus-sasl2-doc - Cyrus SASL - documentation
 libsasl2-2 - Cyrus SASL - authentication abstraction library
 libsasl2-dev - Cyrus SASL - development files for authentication abstraction 
lib
 libsasl2-modules - Cyrus SASL - pluggable authentication modules
 libsasl2-modules-gssapi-mit - Cyrus SASL - pluggable authentication modules 
(GSSAPI)
 libsasl2-modules-ldap - Cyrus SASL - pluggable authentication modules (LDAP)
 libsasl2-modules-otp - Cyrus SASL - pluggable authentication modules (OTP)
 libsasl2-modules-sql - Cyrus SASL - pluggable authentication modules (SQL)
 sasl2-bin  - Cyrus SASL - administration programs for SASL users database
Closes: 530781 542904
Changes: 
 cyrus-sasl2 (2.1.23.dfsg1-1.1) unstable; urgency=medium
 .
   * Build-Depend also on mysqlclient-dev. Closes: #542904
   * Conflict cyrus-sasl2-heimdal-dbg as both packages provide the file
     /usr/lib/debug/usr/lib/sasl2/libgssapiv2.so.2.0.23 Closes: #530781
Checksums-Sha1: 
 7b7b9e00ac38f038ce4712f65b4e521c06f9b16b 1918 cyrus-sasl2_2.1.23.dfsg1-1.1.dsc
 4578dc73c723fef3c152a4d5b1f3922e8182203d 93028 
cyrus-sasl2_2.1.23.dfsg1-1.1.diff.gz
 c4be8da6f2efed48a5dc38133dd8d6fe0866f85d 104456 
cyrus-sasl2-doc_2.1.23.dfsg1-1.1_all.deb
 752adebcd6d46fed3de4f61b16fedad9839ea053 152734 
sasl2-bin_2.1.23.dfsg1-1.1_amd64.deb
 cb443e795403e66cb9d224c0b7bc4683efca2c36 113524 
libsasl2-2_2.1.23.dfsg1-1.1_amd64.deb
 034ae194f3c3fb53050d15168283365844659c4c 155996 
libsasl2-modules_2.1.23.dfsg1-1.1_amd64.deb
 9427f6c3984d7dee1800af46e15dcc6239077ab9 58778 
libsasl2-modules-ldap_2.1.23.dfsg1-1.1_amd64.deb
 a07ad7d36dbb984fb2bdfbe4fd115f98527f6795 79850 
libsasl2-modules-otp_2.1.23.dfsg1-1.1_amd64.deb
 2dc37875cac4d044ab5dfe4834f84ee0bf3eaf20 67968 
libsasl2-modules-sql_2.1.23.dfsg1-1.1_amd64.deb
 e83e4a7086b536650696b745421b4cbff60ab8e7 69486 
libsasl2-modules-gssapi-mit_2.1.23.dfsg1-1.1_amd64.deb
 859c823861edb2896bd31785d52f0562222879dc 277350 
libsasl2-dev_2.1.23.dfsg1-1.1_amd64.deb
 105a41f5a1cc5c95236749c2a5f543e4fe8f2da3 607448 
cyrus-sasl2-dbg_2.1.23.dfsg1-1.1_amd64.deb
Checksums-Sha256: 
 eaef707ddb811c367035ccb8c17fddcf0d12a0cb2ab2e0da4b86c7eb5a8a6094 1918 
cyrus-sasl2_2.1.23.dfsg1-1.1.dsc
 19be3def9cf2d36a08b69d64e2635a15d34b3cd39c972ee83e33fa0371f6a1d4 93028 
cyrus-sasl2_2.1.23.dfsg1-1.1.diff.gz
 c0a84e6a595d38952ae9ed39167f3d1d5101777a12c78024d7a9d8db2f5aedfd 104456 
cyrus-sasl2-doc_2.1.23.dfsg1-1.1_all.deb
 3b9346e0b8fc7385d9068a455f3ddd3651b98738d6b9d9bc10be73723c3ab4af 152734 
sasl2-bin_2.1.23.dfsg1-1.1_amd64.deb
 b4eb4f6b36da0880cad9e2ae18b47bb82dc23da309d8821fc71d176a3cba6901 113524 
libsasl2-2_2.1.23.dfsg1-1.1_amd64.deb
 0ef74dc389419c07e86d47d64ffca579a73faaa087331f4b8436f43415f0d0ce 155996 
libsasl2-modules_2.1.23.dfsg1-1.1_amd64.deb
 1f9e5755687fa89380843e614bbac3843f5ad66a2bcbc0e2862ea971033add94 58778 
libsasl2-modules-ldap_2.1.23.dfsg1-1.1_amd64.deb
 617138ebd45b97c015a8162e20989f19814c93f72108ee77da775fc4401356ae 79850 
libsasl2-modules-otp_2.1.23.dfsg1-1.1_amd64.deb
 db7fd28d427d85416fec27d9bc8deae36880c51f94e3886afed8599c40e9bf78 67968 
libsasl2-modules-sql_2.1.23.dfsg1-1.1_amd64.deb
 85c9bc3d32ed47f35a01d19e1222fd16113b578631cfdd58da6a83f6c2462c38 69486 
libsasl2-modules-gssapi-mit_2.1.23.dfsg1-1.1_amd64.deb
 5c754dd0c534290ae69e3dab9c620974bc534eaa9392cca442846232869830d7 277350 
libsasl2-dev_2.1.23.dfsg1-1.1_amd64.deb
 2b7b05e85ba352697f89ed59724ecd0e48f7e8c9eee82d7d5ac1681b7a6452b6 607448 
cyrus-sasl2-dbg_2.1.23.dfsg1-1.1_amd64.deb
Files: 
 1c4950698977d1dcb0e578895c0c6d59 1918 libs important 
cyrus-sasl2_2.1.23.dfsg1-1.1.dsc
 ffd1726427995f5ec8235b18cec784db 93028 libs important 
cyrus-sasl2_2.1.23.dfsg1-1.1.diff.gz
 32e8916921d98d35dbc156ef9eca385e 104456 doc optional 
cyrus-sasl2-doc_2.1.23.dfsg1-1.1_all.deb
 f61b7e17082bcf09e06f03c759ba6929 152734 utils optional 
sasl2-bin_2.1.23.dfsg1-1.1_amd64.deb
 5a4d28c7447a94159cc30aff3d7d67a9 113524 libs important 
libsasl2-2_2.1.23.dfsg1-1.1_amd64.deb
 b5912387a5fdc17940fc8c20e02da751 155996 libs optional 
libsasl2-modules_2.1.23.dfsg1-1.1_amd64.deb
 7c9452c2f1e87eaf28810f333e025cd6 58778 libs extra 
libsasl2-modules-ldap_2.1.23.dfsg1-1.1_amd64.deb
 8b341bc79c5c100d5197809289863dff 79850 libs extra 
libsasl2-modules-otp_2.1.23.dfsg1-1.1_amd64.deb
 e6a0a12a8285005b1fc5f9e053d4c6ae 67968 libs extra 
libsasl2-modules-sql_2.1.23.dfsg1-1.1_amd64.deb
 4759b9c9429f4155a9a628350fee461d 69486 libs extra 
libsasl2-modules-gssapi-mit_2.1.23.dfsg1-1.1_amd64.deb
 21a4d78ffeaee304edd6e1b83c59793b 277350 libdevel optional 
libsasl2-dev_2.1.23.dfsg1-1.1_amd64.deb
 ae3cf7e3ca537395a84ec23c146715e3 607448 debug extra 
cyrus-sasl2-dbg_2.1.23.dfsg1-1.1_amd64.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkqY3scACgkQmdOZoew2oYWsrgCeNUmwQqPJttRt9T63AdBgzaqi
ar8AnAwPgynZJ+A89cO4BYG4b0jdVmcV
=HtvS
-----END PGP SIGNATURE-----

--- End Message ---

Bug#540467: marked as done (fails to install, trying to overwrite other packages files)

Reply via email to