Package: hplip
Version: 3.12.2-1
Severity: normal
Hi,
I have an HP LaserJet P2015. Every time I turn on the printer, hplip
pops up a message box:
"Driver Plug-In Required. HP Device requires proprietary plug-in which
is missing. Press Next to continue plug-in installation."
This is not true. My printer works fine without any proprietary
plug-in. Perhaps the plug-in adds some feature to the driver, but it
is nothing that I need.
I think that
a) the message should not display unless the plug-in is really
necessary,
b) if it does display, then it should not say that the plug-in is
required when it is not,
c) at the very least, there should be an option: "Do not display this
message again".
Thanks.
-- Package-specific info:
HP Linux Imaging and Printing System (ver. 3.12.2)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2011-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux piglet 3.2.0-2-686-pae #1 SMP Mon Mar 5 01:59:18 UTC 2012 i686 GNU/Linux
Distribution:
debian unstable
Checking Python version...
OK, version 2.7.2 installed
Checking PyQt 4.x version...
OK, version 4.9.1 installed.
Checking for CUPS...
Status: scheduler is running
warning: Version: (cups-config) Not available. Unable to determine installed
version of CUPS.)
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.84.0
------------------------
| RUNTIME DEPENDENCIES |
------------------------
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
functionality may not function properly.
Checking for dependency: GhostScript - PostScript and PDF language interpreter
and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline
scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the libnotify
Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax
functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.12.2 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.12.2
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.2
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 1
systray_messages = 1
[last_used]
device_uri = "hp:/net/Photosmart_C4500_series?ip=192.168.1.8"
printer_name = Photosmart_C4500_series
working_dir = .
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[installation]
date_time = 03/12/12 09:36:39
version = 3.12.2
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- ------------------------
hp:/usb/HP_LaserJet_P2015_Series HP LaserJet P2015 Series
?serial=00CNBW85G12H
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
hplj
----
Type: Printer
Device URI: hp:/usb/HP_LaserJet_P2015_Series?serial=00CNBW85G12H
PPD: /etc/cups/ppd/hplj.ppd
PPD Description: HP LaserJet P2015 Series Postscript (recommended)
Printer status: printer hplj is idle. enabled since Tue Feb 28 10:41:44 2012
Communication status: Good
woozle
------
Type: Printer
Device URI: hp:/net/Photosmart_C4500_series?ip=192.168.1.8
PPD: /etc/cups/ppd/woozle.ppd
PPD Description: HP Photosmart c4500 Series, hpcups 3.11.12
Printer status: printer woozle is idle. enabled since Thu Feb 24 10:27:46 2011
error: Unable to communicate with device (code=12):
hp:/net/Photosmart_C4500_series?ip=192.168.1.8
error: unable to open channel
error: Communication status: Failed
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/net/Photosmart_C4500_series?ip=192.168.1.8' is a Hewlett-Packard
Photosmart_C4500_series all-in-one
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x24 at 004:002:
warning: Device URI: (Makeuri FAILED)
HP Device 0x3817 at 001:004:
Device URI: hp:/usb/HP_LaserJet_P2015_Series?serial=00CNBW85G12H
Device node: /dev/bus/usb/001/004
Mode: 0664
getfacl: Removing leading '/' from absolute path names
# file: dev/bus/usb/001/004
# owner: root
# group: lp
# flags: --t
user::rw-
user:pelle:rw-
group::rw-
mask::rw-
other::r--
---------------
| USER GROUPS |
---------------
pelle adm dialout cdrom floppy sudo audio www-data video plugdev mythtv fuse
wireshark
error: User needs to be member of group 'lp' to enable print, scan & fax.
error: User needs to be member of group 'lpadmin' to manage printers.
-----------
| SUMMARY |
-----------
error: 2 errors and/or warnings.
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=sv_SE.utf8, LC_CTYPE=sv_SE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages hplip depends on:
ii adduser 3.113+nmu1
ii coreutils 8.13-3
ii cups 1.5.2-6
ii hplip-data 3.12.2-1
ii libc6 2.13-27
ii libcups2 1.5.2-6
ii libdbus-1-3 1.4.18-1
ii libhpmud0 3.12.2-1
ii libsane 1.0.22-7
ii libsane-hpaio 3.12.2-1
ii libssl1.0.0 1.0.0g-1
ii lsb-base 3.2+Debian30
ii policykit-1 0.104-2
ii printer-driver-hpcups 3.12.2-1
ii python 2.7.2-10
ii python-dbus 0.84.0-3
ii python-gobject-2 2.28.6-9
ii python-imaging 1.1.7-4
ii python-pexpect 2.3-1
ii python-reportlab 2.5-1.1
ii python2.7 2.7.2-13
ii wget 1.13.4-2
Versions of packages hplip recommends:
ii avahi-daemon 0.6.31-1
ii sane-utils 1.0.22-7
Versions of packages hplip suggests:
ii hplip-doc 3.12.2-1
ii hplip-gui 3.12.2-1
ii python-notify 0.1.1-3
ii system-config-printer 1.3.7-3
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
