Package: broadcom-sta-source
Version: 5.100.82.38-2
Severity: serious
Drivers builts fine but wlan is not operational any more.
If you try to scan any AP you always get the result 'No scan results'
#dmesg
.
.
[ 962.800547] wl 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 962.820963] eth2: Broadcom BCM4329 802.11 Hybrid Wireless Controller
5.100.82.38
[ 973.052304] eth2: no IPv6 routers present
#lspci
.
.
0a:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01)
#lspci -v
.
.
0a:00.0 Network controller: Broadcom Corporation BCM4321 802.11b/g/n (rev 01)
Subsystem: Netgear Device 7d00
Flags: bus master, fast devsel, latency 32, IRQ 16
Memory at fb9f8000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: wl
--- System information. ---
Architecture: amd64
Kernel: Linux 3.0.0-1-amd64
Debian Release: wheezy/sid
500 testing ftp.us.debian.org
500 stable dl.google.com
--- Package information. ---
Depends (Version) | Installed
========================-+-===========
debhelper (>= 7) | 8.9.4
bzip2 | 1.0.5-6
make | 3.81-8.1
quilt | 0.48-7
Recommends (Version) | Installed
===============================-+-===========
module-assistant | 0.11.4
Suggests (Version) | Installed
=============================-+-===========
wireless-tools | 30~pre9-5
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
