Package: cups
Version: 1.4.7-1
Severity: important
File: /usr/sbin/cupsd
Unplugging the printer (HP OfficeJet J4580 All-in-One) results in segault in
libavahi (see logs below)
In addition (not sure if related), attempting to print from Iceweasel or Evince
results in part of a page being printed then timeout and the following messages
after the segfault syslogs below.
Segfault Syslog
---------------
Jul 20 22:36:07 daniloth kernel: [ 671.243053] usb 2-1: USB disconnect, device
number 2
Jul 20 22:36:07 daniloth udev-configure-printer: remove
/devices/pci0000:00/0000:00:13.2/usb2/2-1
Jul 20 22:36:07 daniloth udev-configure-printer: Queue
ipp://localhost:631/printers/Officejet-J4500-series has matching device URI
Jul 20 22:36:07 daniloth udev-configure-printer: Disabled printer
ipp://localhost:631/printers/Officejet-J4500-series as the corresponding device
was unplugged or turned off
Jul 20 22:36:07 daniloth udev-configure-printer: Queue
ipp://localhost:631/printers/Officejet-J4500-series-Fax has matching device URI
Jul 20 22:36:07 daniloth udev-configure-printer: Disabled printer
ipp://localhost:631/printers/Officejet-J4500-series-Fax as the corresponding
device was unplugged or turned off
Jul 20 22:36:09 daniloth kernel: [ 673.016125] usb 2-1: new high speed USB
device number 6 using ehci_hcd
Jul 20 22:36:09 daniloth kernel: [ 673.149700] usb 2-1: New USB device found,
idVendor=03f0, idProduct=2a12
Jul 20 22:36:09 daniloth kernel: [ 673.149711] usb 2-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Jul 20 22:36:09 daniloth kernel: [ 673.149719] usb 2-1: Product: Officejet
J4500 series
Jul 20 22:36:09 daniloth kernel: [ 673.149725] usb 2-1: Manufacturer: HP
Jul 20 22:36:09 daniloth kernel: [ 673.149730] usb 2-1: SerialNumber:
CN9CHD31FB052T
Jul 20 22:36:09 daniloth mtp-probe: checking bus 2, device 6:
"/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1"
Jul 20 22:36:09 daniloth mtp-probe: bus: 2, device: 6 was not an MTP device
Jul 20 22:36:09 daniloth udev-configure-printer: add
/devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.1
Jul 20 22:36:09 daniloth udev-configure-printer: parent devpath is
/devices/pci0000:00/0000:00:13.2/usb2/2-1
Jul 20 22:36:09 daniloth udev-configure-printer: Device vendor/product is
03F0:2A12
Jul 20 22:36:09 daniloth udev-configure-printer: MFG:HP MDL:Officejet J4500
series SERN:CN9CHD31FB052T serial:CN9CHD31FB052T
Jul 20 22:36:10 daniloth kernel: [ 674.456179] usb 2-1: usbfs: process 27771
(usb) did not claim interface 0 before use
Jul 20 22:36:10 daniloth hp[27767]: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Jul 20 22:36:11 daniloth python: io/hpmud/pp.c 627: unable to read device-id
ret=-1
Jul 20 22:36:25 daniloth udev-configure-printer: SERN fields match
Jul 20 22:36:25 daniloth udev-configure-printer: URI match:
usb://HP/Officejet%20J4500%20series?serial=CN9CHD31FB052T&interface=1
Jul 20 22:36:25 daniloth udev-configure-printer: SERN fields match
Jul 20 22:36:25 daniloth udev-configure-printer: URI match:
hp:/usb/Officejet_J4500_series?serial=CN9CHD31FB052T
Jul 20 22:36:25 daniloth udev-configure-printer:
hp:/usb/Officejet_J4500_series?serial=CN9CHD31FB052T twinned with
hpfax:/usb/Officejet_J4500_series?serial=CN9CHD31FB052T
Jul 20 22:36:25 daniloth udev-configure-printer: Queue
ipp://localhost:631/printers/Officejet-J4500-series has matching device URI
Jul 20 22:36:25 daniloth udev-configure-printer: Re-enabled printer
ipp://localhost:631/printers/Officejet-J4500-series
Jul 20 22:36:25 daniloth udev-configure-printer: Queue
ipp://localhost:631/printers/Officejet-J4500-series-Fax has matching device URI
Jul 20 22:36:25 daniloth kernel: [ 689.475096] cupsd[3864]: segfault at d0 ip
00007fe0d98e3ff6 sp 00007fffdc201e58 error 4 in
libavahi-common.so.3.5.3[7fe0d98df000+c000]
Printing Failure Timeout Messages - repeated every 30 seconds until cups or
hplip gives up.
---------------------------------
Jul 20 21:25:13 daniloth hp[7158]: io/hpmud/musb.c 1420: unable to write data
hp:/usb/Officejet_J4500_series?serial=CN9CHD31FB052T: 45 second io timeout
Jul 20 21:25:27 daniloth hp[9502]: prnt/backend/hp.c 772: INFO: open print
channel failed stat=21; will retry in 30 seconds...
-- System Information:
Debian Release: wheezy/sid
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'testing'), (100, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.39-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages cups depends on:
ii adduser 3.113 add and remove users and groups
ii bc 1.06.95-2 The GNU bc arbitrary precision cal
ii cups-client 1.4.7-1 Common UNIX Printing System(tm) -
ii cups-common 1.4.7-1 Common UNIX Printing System(tm) -
ii cups-ppdc 1.4.7-1 Common UNIX Printing System(tm) -
ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy
ii ghostscript 9.02~dfsg-3 interpreter for the PostScript lan
ii libacl1 2.2.51-2 Access control list shared library
ii libavahi-client3 0.6.30-5 Avahi client library
ii libavahi-common3 0.6.30-5 Avahi common library
ii libc6 2.13-7 Embedded GNU C Library: Shared lib
ii libcups2 1.4.7-1 Common UNIX Printing System(tm) -
ii libcupscgi1 1.4.7-1 Common UNIX Printing System(tm) -
ii libcupsdriver1 1.4.7-1 Common UNIX Printing System(tm) -
ii libcupsimage2 1.4.7-1 Common UNIX Printing System(tm) -
ii libcupsmime1 1.4.7-1 Common UNIX Printing System(tm) -
ii libcupsppdc1 1.4.7-1 Common UNIX Printing System(tm) -
ii libdbus-1-3 1.4.12-5 simple interprocess messaging syst
ii libgcc1 1:4.6.1-4 GCC support library
ii libgnutls26 2.10.5-2 the GNU TLS library - runtime libr
ii libgssapi-krb5-2 1.9.1+dfsg-1+b1 MIT Kerberos runtime libraries - k
ii libijs-0.35 0.35-7 IJS raster image transport protoco
ii libkrb5-3 1.9.1+dfsg-1+b1 MIT Kerberos runtime libraries
ii liblcms1 1.18.dfsg-1.2+b4 Color management library
ii libldap-2.4-2 2.4.25-1+b1 OpenLDAP libraries
ii libpam0g 1.1.3-2 Pluggable Authentication Modules l
ii libpaper1 1.1.24+nmu1 library for handling paper charact
ii libpoppler13 0.16.7-2 PDF rendering library
ii libslp1 1.2.1-7.8 OpenSLP libraries
ii libstdc++6 4.6.1-4 GNU Standard C++ Library v3
ii libusb-0.1-4 2:0.1.12-18 userspace USB programming library
ii lsb-base 3.2-27 Linux Standard Base 3.2 init scrip
ii poppler-utils 0.16.7-2 PDF utilities (based on Poppler)
ii procps 1:3.2.8-10 /proc file system utilities
ii ssl-cert 1.0.28 simple debconf wrapper for OpenSSL
ii ttf-freefont 20100919-1 Freefont Serif, Sans and Mono True
ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime
Versions of packages cups recommends:
ii avahi-daemon 0.6.30-5 Avahi mDNS/DNS-SD daemon
ii cups-driver-gutenprint 5.2.6-1 printer drivers for CUPS
ii foomatic-filters 4.0.7-1 OpenPrinting printer support - fil
ii ghostscript-cups 9.02~dfsg-3 interpreter for the PostScript lan
Versions of packages cups suggests:
ii cups-bsd 1.4.7-1 Common UNIX Printing System(tm) -
ii cups-pdf 2.5.1-3 PDF printer for CUPS
ii foomatic-db 20110617-1 OpenPrinting printer support - dat
ii hplip 3.11.5-2 HP Linux Printing and Imaging Syst
ii smbclient 2:3.5.8~dfsg-5 command-line SMB/CIFS clients for
ii udev 171-3 /dev/ and hotplug management daemo
-- Configuration Files:
/etc/cups/cupsd.conf changed:
LogLevel warn
MaxLogSize 0
SystemGroup lpadmin
Port 631
Listen /var/run/cups/cups.sock
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseRemoteProtocols CUPS dnssd
BrowseAddress @LOCAL
BrowseLocalProtocols CUPS dnssd
DefaultAuthType Basic
<Location />
# Allow remote access...
Order allow,deny
Allow all
</Location>
<Location /admin>
</Location>
<Location /admin/conf>
AuthType Default
Require user @SYSTEM
</Location>
<Policy default>
<Limit Create-Job Print-Job Print-URI Validate-Job>
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs
Set-Job-Attributes Create-Job-Subscription Renew-Subscription
Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job
Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class
CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer
Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs
Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer
Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs
CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Authenticate-Job>
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
<Policy authenticated>
<Limit Create-Job Print-Job Print-URI Validate-Job>
AuthType Default
Order deny,allow
</Limit>
<Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs
Set-Job-Attributes Create-Job-Subscription Renew-Subscription
Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job
Suspend-Current-Job Resume-Job CUPS-Move-Job CUPS-Get-Document>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class
CUPS-Delete-Class CUPS-Set-Default>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer
Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs
Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer
Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs
CUPS-Reject-Jobs>
AuthType Default
Require user @SYSTEM
Order deny,allow
</Limit>
<Limit Cancel-Job CUPS-Authenticate-Job>
AuthType Default
Require user @OWNER @SYSTEM
Order deny,allow
</Limit>
<Limit All>
Order deny,allow
</Limit>
</Policy>
-- debconf information:
cupsys/raw-print: true
cupsys/backend: ipp, lpd, parallel, scsi, serial, socket, usb, snmp, dnssd
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
