Package: linux-image-2.6.37-qtmoko-gta02 Version: 20110412.git425779c72-1 Severity: normal
I upgraded from "Verbatim 4 GB SDHC class 4" card to "Kingston 8 GB SDHC class 4" card and now my system does not boot anymore. I'm using http://pkg-fso.alioth.debian.org/debian/pool/main/l/linux-2.6-qtmoko/linux-image-2.6.37-qtmoko-gta02_20110412.git425779c72-1_armel.deb http://lindi.iki.fi/lindi/qi/qi_20100105-1~unrelease0_armel.deb The difference in boot messages is @@ -3,8 +3,8 @@ Detected: Freerunner / GTA02, A6 PCB Battery condition reasonable Trying kernel: SD Card EXT2 P1 Kernel -Card Type: SD 2.0 SDHC / Mfr: 0x1b, OEM "SM" / 00000", rev 1.0 / s/n: 2021353516 / date: 5/2009 -SDHC size: 3884 MiB +Card Type: SD 2.0 SDHC / Mfr: 0x02, OEM "TM" / SA08G", rev 0.6 / s/n: 576236754 / date: 12/2010 +SDHC size: 7592 MiB Partition: 1 start +52 512-byte blocks, size 16 MiB EXT2 open: boot/noboot-GTA02 Open failed EXT2 open: boot/append-GTA02 OK @@ -216,12 +216,12 @@ TCP westwood registered NET: Registered protocol family 17 Bridge firewalling registered - registered taskstats version 1 BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1) + registered taskstats version 1 regulator_init_complete: incomplete constraints, leaving memldo on - regulator_init_complete: incomplete constraints, leaving hcldo on AR6000 Reg Code = 0x40000060 - pcf50633-rtc pcf50633-rtc.0: setting system clock to 2000-01-01 00:33:42 UTC (946686822) + regulator_init_complete: incomplete constraints, leaving hcldo on + pcf50633-rtc pcf50633-rtc.0: setting system clock to 2000-01-01 00:00:22 UTC (946684822) Waiting 1sec before mounting root device... glamo-mci glamo-mci.0: powered (vdd = 21) clk: 0kHz div=0 (req: 0kHz). Bus width=0 glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 @@ -234,12 +234,25 @@ glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=0 glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=2 - mmc1: new high speed SDHC card at address 0001 - mmcblk0: mmc1:0001 00000 3.79 GiB + mmc1: new high speed SDHC card at address 1234 + mmcblk0: mmc1:1234 SA08G 7.41 GiB mmcblk0: p1 p2 kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode VFS: Mounted root (ext3 filesystem) readonly on device 179:2. - devtmpfs: mounted + devtmpfs: error mounting -2 Freeing init memory: 124K -INIT: version 2.88 booting + Failed to execute /sbin/init. Attempting defaults... and complete boot logs are attached. If I use rootdelay=8 then I get [ 4.560000] mmc1: new high speed SDHC card at address 1234 [ 4.570000] mmcblk0: mmc1:1234 SA08G 7.41 GiB [ 4.580000] mmcblk0: p1 p2 [ 12.220000] EXT2-fs (mmcblk0p2): warning: mounting ext3 filesystem as ext2 [ 12.230000] VFS: Mounted root (ext2 filesystem) readonly on device 179:2. [ 12.250000] EXT2-fs (mmcblk0p2): error: ext2_check_page: bad entry in directory #2: : rec_len is smaller than minimal - offset=0, inode=0, rec_len=0, name_len=0 [ 12.270000] devtmpfs: error mounting -2 If I also add rootfstype=ext3 I get [ 4.590000] mmc1: new high speed SDHC card at address 1234 [ 4.600000] mmcblk0: mmc1:1234 SA08G 7.41 GiB [ 4.610000] mmcblk0: p1 p2 [ 12.220000] List of all partitions: [ 12.230000] 1f00 2048 mtdblock0 (driver?) [ 12.240000] 1f01 256 mtdblock1 (driver?) [ 12.250000] 1f02 256 mtdblock2 (driver?) [ 12.260000] 1f03 8192 mtdblock3 (driver?) [ 12.270000] 1f04 640 mtdblock4 (driver?) [ 12.280000] 1f05 256 mtdblock5 (driver?) [ 12.290000] 1f06 252544 mtdblock6 (driver?) [ 12.300000] b300 7774208 mmcblk0 driver: mmcblk [ 12.310000] b301 16510 mmcblk0p1 [ 12.330000] b302 3960372 mmcblk0p2 [ 12.340000] No filesystem could mount root, tried: ext3
Qi Bootloader s3c2442 wallwart debian_20100105-1~unrelease0 2011-06-06T08:29:17+0000 Copyright (C) 2008 Openmoko, Inc. Detected: Freerunner / GTA02, A6 PCB Battery condition reasonable Trying kernel: SD Card EXT2 P1 Kernel Card Type: SD 2.0 SDHC / Mfr: 0x1b, OEM "SM" / 00000", rev 1.0 / s/n: 2021353516 / date: 5/2009 SDHC size: 3884 MiB Partition: 1 start +52 512-byte blocks, size 16 MiB EXT2 open: boot/noboot-GTA02 Open failed EXT2 open: boot/append-GTA02 OK EXT2 open: boot/uImage-GTA02.bin OK Found: "Debian FreeRunner Kernel" Size: 2148 KiB EXT2 open: boot/uImage-GTA02.bin OK Cmdline: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs) g_ether.dev_addr=00:1F:11:01:62:8A g_ether.host_addr=00:1F:11:01:62:8B root=/dev/mmcblk0p1 rootdelay=1 rootdelay=1 panic=20 mem=127M root=/dev/mmcblk0p2 loglevel=8 loglevel=8 Starting ---> Uncompressing Linux... done, booting the kernel. [ 0.000000] Linux version 2.6.34-20101212.git049b71de (root@neo) (gcc version 4.6.1 20110611 (prerelease) (Debian 4.6.0-13) ) #1 Fri Jun 17 00:09:05 UTC 2011 [ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: GTA02 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 32512 [ 0.000000] free_area_init_node: node 0, pgdat c0432c00, node_mem_map c0487000 [ 0.000000] Normal zone: 254 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32258 pages, LIFO batch:7 [ 0.000000] CPU S3C2442B (id 0x32440aab) [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ 0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz [ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32258 [ 0.000000] Kernel command line: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs) g_ether.dev_addr=00:1F:11:01:62:8A g_ether.host_addr=00:1F:11:01:62:8B root=/dev/mmcblk0p1 rootdelay=1 rootdelay=1 panic=20 mem=127M root=/dev/mmcblk0p2 loglevel=8 loglevel=8 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 127MB = 127MB total [ 0.000000] Memory: 124292k/124292k available, 5756k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xc8000000 - 0xe0000000 ( 384 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc7f00000 ( 127 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0027000 ( 124 kB) [ 0.000000] .text : 0xc0027000 - 0xc040c000 (3988 kB) [ 0.000000] .data : 0xc040c000 - 0xc0433200 ( 157 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:134 [ 0.000000] irq: clearing pending ext status 000b12f0 [ 0.000000] irq: clearing pending ext status 000900d0 [ 0.000000] irq: clearing subpending status 000001c0 [ 0.000000] irq: clearing subpending status 00000080 [ 0.000000] timer tcon=00000000, tcnt a2c1, tcfg 00000500,00000000, usec 00003d71 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttySAC2] enabled [ 0.010000] Calibrating delay loop... 199.47 BogoMIPS (lpj=997376) [ 0.210000] Mount-cache hash table entries: 512 [ 0.210000] CPU: Testing write buffer coherency: ok [ 0.210000] devtmpfs: initialized [ 0.220000] regulator: core version 0.5 [ 0.220000] NET: Registered protocol family 16 [ 0.240000] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.260000] S3C2442: Initialising architecture [ 0.260000] S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics [ 0.270000] DMA channel 0 at c8008000, irq 33 [ 0.270000] DMA channel 1 at c8008040, irq 34 [ 0.280000] DMA channel 2 at c8008080, irq 35 [ 0.280000] DMA channel 3 at c80080c0, irq 36 [ 0.280000] S3C244X: Clock Support, DVS off [ 0.290000] s3c-adc s3c24xx-adc: attached adc driver [ 0.290000] s3c24xx-pwm s3c24xx-pwm.0: tin at 25000000, tdiv at 25000000, tin=divclk, base 0 [ 0.300000] s3c24xx-pwm s3c24xx-pwm.1: tin at 25000000, tdiv at 25000000, tin=divclk, base 8 [ 0.310000] s3c24xx-pwm s3c24xx-pwm.2: tin at 4166666, tdiv at 4166666, tin=divclk, base 12 [ 0.320000] s3c24xx-pwm s3c24xx-pwm.3: tin at 4166666, tdiv at 4166666, tin=divclk, base 16 [ 0.400000] bio: create slab <bio-0> at 0 [ 0.410000] usbcore: registered new interface driver usbfs [ 0.410000] usbcore: registered new interface driver hub [ 0.420000] usbcore: registered new device driver usb [ 0.420000] s3c-i2c s3c2440-i2c: slave address 0x10 [ 0.420000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz [ 0.470000] pcf50633 0-0073: Probed device version 19 variant 132 [ 0.570000] wake enabled for irq 53 [ 0.630000] regulator: auto: 3300 mV normal [ 0.690000] regulator: down1: 1300 <--> 1600 mV at 1300 mV normal [ 0.750000] regulator: down2: 1800 mV normal [ 0.770000] regulator: ldo1: 3300 mV normal [ 0.790000] regulator: ldo2: 3300 mV normal [ 0.810000] regulator: ldo3: 3000 mV normal [ 0.830000] regulator: ldo4: 3200 mV normal [ 0.850000] regulator: ldo5: 3000 mV normal [ 0.850000] regulator: ldo6: 3000 mV normal [ 0.870000] regulator: hcldo: 2000 <--> 3300 mV at 3000 mV normal [ 0.870000] regulator: memldo: 1800 mV normal [ 0.870000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter [ 0.880000] Advanced Linux Sound Architecture Driver Version 1.0.22.1. [ 0.890000] Bluetooth: Core ver 2.15 [ 0.890000] NET: Registered protocol family 31 [ 0.890000] Bluetooth: HCI device and connection manager initialized [ 0.900000] Bluetooth: HCI socket layer initialized [ 0.910000] NET: Registered protocol family 2 [ 0.910000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.920000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.920000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.930000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.940000] TCP reno registered [ 0.940000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.950000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.950000] NET: Registered protocol family 1 [ 0.960000] gta02-pm-bt gta02-pm-bt.0: Openmoko Freerunner Bluetooth Power Management: starting [ 0.990000] gta02-pm-gps gta02-pm-gps.0: starting [ 0.990000] gta02-pm-wlan gta02-pm-wlan.0: starting [ 1.200000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.200000] msgmni has been set to 242 [ 1.220000] alg: No test for stdrng (krng) [ 1.220000] io scheduler noop registered [ 1.220000] io scheduler deadline registered (default) [ 1.350000] regulator: GSM: 3700 mV normal [ 1.430000] regulator: USBHOST: 3700 mV normal [ 1.550000] s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440 [ 1.560000] s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440 [ 1.560000] s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440 [ 1.610000] brd: module loaded [ 1.610000] neo1973-resume neo1973-resume.0: starting [ 1.700000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc. [ 1.700000] glamo-fb glamo-fb.0: spin_lock_init [ 1.790000] Console: switching to colour frame buffer device 80x58 [ 1.850000] fb0: SMedia Glamo frame buffer device [ 1.860000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz [ 1.870000] physmap platform flash device: 00200000 at 18000000 [ 1.870000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank [ 1.880000] Intel/Sharp Extended Query Table at 0x0039 [ 1.890000] Intel/Sharp Extended Query Table at 0x0039 [ 1.890000] Intel/Sharp Extended Query Table at 0x0039 [ 1.900000] Intel/Sharp Extended Query Table at 0x0039 [ 1.900000] Intel/Sharp Extended Query Table at 0x0039 [ 1.910000] cfi_cmdset_0001: Erase suspend on write enabled [ 1.910000] erase region 0: offset=0x0,size=0x2000,blocks=8 [ 1.920000] erase region 1: offset=0x10000,size=0x10000,blocks=31 [ 1.920000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB [ 1.930000] RedBoot partition parsing not available [ 1.940000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics [ 1.940000] s3c24xx-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns [ 1.950000] s3c24xx-nand s3c2440-nand: NAND soft ECC [ 1.960000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit) [ 1.960000] 6 cmdlinepart partitions found on MTD device neo1973-nand [ 1.970000] Creating 6 MTD partitions on "neo1973-nand": [ 1.980000] 0x000000000000-0x000000040000 : "qi" [ 1.980000] 0x000000040000-0x000000080000 : "depr-ub-env" [ 1.990000] 0x000000080000-0x000000880000 : "kernel" [ 2.000000] 0x000000880000-0x000000920000 : "depr" [ 2.010000] 0x000000920000-0x000000960000 : "identity-ext2" [ 2.020000] 0x000000960000-0x000010000000 : "rootfs" [ 2.450000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.460000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI [ 2.470000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 [ 2.480000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 [ 2.550000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.560000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.570000] usb usb1: Product: S3C24XX OHCI [ 2.580000] usb usb1: Manufacturer: Linux 2.6.34-20101212.git049b71de ohci_hcd [ 2.590000] usb usb1: SerialNumber: s3c24xx [ 2.600000] hub 1-0:1.0: USB hub found [ 2.610000] hub 1-0:1.0: 2 ports detected [ 2.620000] mice: PS/2 mouse device common for all mice [ 2.630000] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.640000] s3c24xx-ts s3c2440-ts: driver attached, registering input device [ 2.650000] input: S3C24XX TouchScreen as /devices/virtual/input/input1 [ 2.660000] input: PCF50633 PMU events as /devices/virtual/input/input2 [ 2.680000] input: lis302-1 (top) as /devices/virtual/input/input3 [ 2.690000] lis302dl spi3.0: Found lis302-1 (top) [ 2.700000] input: lis302-2 (bottom) as /devices/virtual/input/input4 [ 2.720000] lis302dl spi3.1: Found lis302-2 (bottom) [ 2.730000] pcf50633-rtc pcf50633-rtc.0: rtc core: registered pcf50633-rtc as rtc0 [ 2.740000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics [ 2.750000] i2c /dev entries driver [ 2.830000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc [ 2.840000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics [ 2.850000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled [ 2.860000] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 2.880000] usbcore: registered new interface driver btusb [ 2.890000] cpuidle: using governor ladder [ 2.900000] s3c-sdi s3c2440-sdi: powered down. [ 2.910000] s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ [ 2.920000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [ 2.930000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc [ 2.940000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. [ 2.950000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 2.960000] HIFInit [ 2.970000] Registered led device: gta02:red:aux [ 2.980000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 3.000000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 3.020000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 3.050000] usbcore: registered new interface driver usbhid [ 3.060000] usbhid: USB HID core driver [ 3.070000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 3.090000] mmc0: queuing unknown CIS tuple 0x01 (3 bytes) [ 3.100000] mmc0: queuing unknown CIS tuple 0x1a (5 bytes) [ 3.120000] mmc0: queuing unknown CIS tuple 0x1b (8 bytes) [ 3.140000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). [ 3.150000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). [ 3.160000] mmc0: queuing unknown CIS tuple 0x80 (1 bytes) [ 3.170000] mmc0: queuing unknown CIS tuple 0x81 (1 bytes) [ 3.180000] mmc0: queuing unknown CIS tuple 0x82 (1 bytes) [ 3.190000] mmc0: new SDIO card at address 0001 [ 3.370000] No device for DAI s3c24xx-i2s [ 3.380000] No device for DAI Bluetooth [ 3.400000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok [ 3.410000] asoc: WM8753 Voice <-> Bluetooth mapping ok [ 3.790000] input: neo1973gta02 Headset Jack as /devices/platform/soc-audio/sound/card0/input5 [ 3.820000] ALSA device list: [ 3.830000] #0: neo1973gta02 (WM8753) [ 3.840000] TCP westwood registered [ 3.850000] NET: Registered protocol family 17 [ 3.860000] Bridge firewalling registered [ 3.920000] registered taskstats version 1 [ 3.930000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1) [ 3.960000] regulator_init_complete: incomplete constraints, leaving memldo on [ 3.990000] regulator_init_complete: incomplete constraints, leaving hcldo on [ 4.000000] AR6000 Reg Code = 0x40000060 [ 4.150000] pcf50633-rtc pcf50633-rtc.0: setting system clock to 2000-01-01 00:33:42 UTC (946686822) [ 4.160000] Waiting 1sec before mounting root device... [ 4.250000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 0kHz div=0 (req: 0kHz). Bus width=0 [ 4.280000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.310000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.330000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.400000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.420000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.440000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.470000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.490000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.510000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=0 [ 4.520000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=2 [ 4.530000] mmc1: new high speed SDHC card at address 0001 [ 4.540000] mmcblk0: mmc1:0001 00000 3.79 GiB [ 4.550000] mmcblk0: p1 p2 [ 5.190000] kjournald starting. Commit interval 5 seconds [ 5.200000] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode [ 5.210000] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 5.230000] devtmpfs: mounted [ 5.240000] Freeing init memory: 124K INIT: version 2.88 booting
Qi Bootloader s3c2442 wallwart debian_20100105-1~unrelease0 2011-06-06T08:29:17+0000 Copyright (C) 2008 Openmoko, Inc. Detected: Freerunner / GTA02, A6 PCB Battery condition reasonable Trying kernel: SD Card EXT2 P1 Kernel Card Type: SD 2.0 SDHC / Mfr: 0x02, OEM "TM" / SA08G", rev 0.6 / s/n: 576236754 / date: 12/2010 SDHC size: 7592 MiB Partition: 1 start +52 512-byte blocks, size 16 MiB EXT2 open: boot/noboot-GTA02 Open failed EXT2 open: boot/append-GTA02 OK EXT2 open: boot/uImage-GTA02.bin OK Found: "Debian FreeRunner Kernel" Size: 2148 KiB EXT2 open: boot/uImage-GTA02.bin OK Cmdline: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs) g_ether.dev_addr=00:1F:11:01:62:8A g_ether.host_addr=00:1F:11:01:62:8B root=/dev/mmcblk0p1 rootdelay=1 rootdelay=1 panic=20 mem=127M root=/dev/mmcblk0p2 loglevel=8 loglevel=8 Starting ---> Uncompressing Linux... done, booting the kernel. [ 0.000000] Linux version 2.6.34-20101212.git049b71de (root@neo) (gcc version 4.6.1 20110611 (prerelease) (Debian 4.6.0-13) ) #1 Fri Jun 17 00:09:05 UTC 2011 [ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: GTA02 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 32512 [ 0.000000] free_area_init_node: node 0, pgdat c0432c00, node_mem_map c0487000 [ 0.000000] Normal zone: 254 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32258 pages, LIFO batch:7 [ 0.000000] CPU S3C2442B (id 0x32440aab) [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics [ 0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz [ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32258 [ 0.000000] Kernel command line: loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs) g_ether.dev_addr=00:1F:11:01:62:8A g_ether.host_addr=00:1F:11:01:62:8B root=/dev/mmcblk0p1 rootdelay=1 rootdelay=1 panic=20 mem=127M root=/dev/mmcblk0p2 loglevel=8 loglevel=8 [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 127MB = 127MB total [ 0.000000] Memory: 124292k/124292k available, 5756k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xc8000000 - 0xe0000000 ( 384 MB) [ 0.000000] lowmem : 0xc0000000 - 0xc7f00000 ( 127 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc0027000 ( 124 kB) [ 0.000000] .text : 0xc0027000 - 0xc040c000 (3988 kB) [ 0.000000] .data : 0xc040c000 - 0xc0433200 ( 157 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:134 [ 0.000000] irq: clearing pending ext status 000b12f0 [ 0.000000] irq: clearing pending ext status 000900d0 [ 0.000000] irq: clearing subpending status 000001c0 [ 0.000000] irq: clearing subpending status 00000080 [ 0.000000] timer tcon=00000000, tcnt a2c1, tcfg 00000500,00000000, usec 00003d71 [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttySAC2] enabled [ 0.010000] Calibrating delay loop... 199.47 BogoMIPS (lpj=997376) [ 0.210000] Mount-cache hash table entries: 512 [ 0.210000] CPU: Testing write buffer coherency: ok [ 0.210000] devtmpfs: initialized [ 0.220000] regulator: core version 0.5 [ 0.220000] NET: Registered protocol family 16 [ 0.240000] S3C Power Management, Copyright 2004 Simtec Electronics [ 0.260000] S3C2442: Initialising architecture [ 0.260000] S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics [ 0.270000] DMA channel 0 at c8008000, irq 33 [ 0.270000] DMA channel 1 at c8008040, irq 34 [ 0.280000] DMA channel 2 at c8008080, irq 35 [ 0.280000] DMA channel 3 at c80080c0, irq 36 [ 0.280000] S3C244X: Clock Support, DVS off [ 0.290000] s3c-adc s3c24xx-adc: attached adc driver [ 0.290000] s3c24xx-pwm s3c24xx-pwm.0: tin at 25000000, tdiv at 25000000, tin=divclk, base 0 [ 0.300000] s3c24xx-pwm s3c24xx-pwm.1: tin at 25000000, tdiv at 25000000, tin=divclk, base 8 [ 0.310000] s3c24xx-pwm s3c24xx-pwm.2: tin at 4166666, tdiv at 4166666, tin=divclk, base 12 [ 0.320000] s3c24xx-pwm s3c24xx-pwm.3: tin at 4166666, tdiv at 4166666, tin=divclk, base 16 [ 0.400000] bio: create slab <bio-0> at 0 [ 0.410000] usbcore: registered new interface driver usbfs [ 0.410000] usbcore: registered new interface driver hub [ 0.420000] usbcore: registered new device driver usb [ 0.420000] s3c-i2c s3c2440-i2c: slave address 0x10 [ 0.420000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz [ 0.470000] pcf50633 0-0073: Probed device version 19 variant 132 [ 0.570000] wake enabled for irq 53 [ 0.630000] regulator: auto: 3300 mV normal [ 0.690000] regulator: down1: 1300 <--> 1600 mV at 1300 mV normal [ 0.750000] regulator: down2: 1800 mV normal [ 0.850000] regulator: ldo1: 3300 mV normal [ 0.870000] regulator: ldo2: 3300 mV normal [ 0.890000] regulator: ldo3: 3000 mV normal [ 0.910000] regulator: ldo4: 3200 mV normal [ 0.930000] regulator: ldo5: 3000 mV normal [ 0.930000] regulator: ldo6: 3000 mV normal [ 0.950000] regulator: hcldo: 2000 <--> 3300 mV at 3000 mV normal [ 0.950000] regulator: memldo: 1800 mV normal [ 0.950000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter [ 0.960000] Advanced Linux Sound Architecture Driver Version 1.0.22.1. [ 0.970000] Bluetooth: Core ver 2.15 [ 0.970000] NET: Registered protocol family 31 [ 0.970000] Bluetooth: HCI device and connection manager initialized [ 0.980000] Bluetooth: HCI socket layer initialized [ 0.990000] NET: Registered protocol family 2 [ 0.990000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 1.000000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 1.000000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 1.010000] TCP: Hash tables configured (established 4096 bind 4096) [ 1.020000] TCP reno registered [ 1.020000] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 1.030000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 1.030000] NET: Registered protocol family 1 [ 1.040000] gta02-pm-bt gta02-pm-bt.0: Openmoko Freerunner Bluetooth Power Management: starting [ 1.070000] gta02-pm-gps gta02-pm-gps.0: starting [ 1.070000] gta02-pm-wlan gta02-pm-wlan.0: starting [ 1.280000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.280000] msgmni has been set to 242 [ 1.300000] alg: No test for stdrng (krng) [ 1.300000] io scheduler noop registered [ 1.300000] io scheduler deadline registered (default) [ 1.430000] regulator: GSM: 3700 mV normal [ 1.510000] regulator: USBHOST: 3700 mV normal [ 1.630000] s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440 [ 1.640000] s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440 [ 1.640000] s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440 [ 1.690000] brd: module loaded [ 1.690000] neo1973-resume neo1973-resume.0: starting [ 1.780000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc. [ 1.780000] glamo-fb glamo-fb.0: spin_lock_init [ 1.870000] Console: switching to colour frame buffer device 80x58 [ 1.930000] fb0: SMedia Glamo frame buffer device [ 1.940000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz [ 1.950000] physmap platform flash device: 00200000 at 18000000 [ 1.950000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank [ 1.960000] Intel/Sharp Extended Query Table at 0x0039 [ 1.970000] Intel/Sharp Extended Query Table at 0x0039 [ 1.970000] Intel/Sharp Extended Query Table at 0x0039 [ 1.980000] Intel/Sharp Extended Query Table at 0x0039 [ 1.980000] Intel/Sharp Extended Query Table at 0x0039 [ 1.990000] cfi_cmdset_0001: Erase suspend on write enabled [ 1.990000] erase region 0: offset=0x0,size=0x2000,blocks=8 [ 2.000000] erase region 1: offset=0x10000,size=0x10000,blocks=31 [ 2.000000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB [ 2.010000] RedBoot partition parsing not available [ 2.020000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics [ 2.020000] s3c24xx-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns [ 2.030000] s3c24xx-nand s3c2440-nand: NAND soft ECC [ 2.040000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit) [ 2.040000] 6 cmdlinepart partitions found on MTD device neo1973-nand [ 2.050000] Creating 6 MTD partitions on "neo1973-nand": [ 2.060000] 0x000000000000-0x000000040000 : "qi" [ 2.060000] 0x000000040000-0x000000080000 : "depr-ub-env" [ 2.070000] 0x000000080000-0x000000880000 : "kernel" [ 2.080000] 0x000000880000-0x000000920000 : "depr" [ 2.090000] 0x000000920000-0x000000960000 : "identity-ext2" [ 2.100000] 0x000000960000-0x000010000000 : "rootfs" [ 2.530000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.540000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI [ 2.550000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 [ 2.560000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 [ 2.630000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.640000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.650000] usb usb1: Product: S3C24XX OHCI [ 2.660000] usb usb1: Manufacturer: Linux 2.6.34-20101212.git049b71de ohci_hcd [ 2.670000] usb usb1: SerialNumber: s3c24xx [ 2.680000] hub 1-0:1.0: USB hub found [ 2.690000] hub 1-0:1.0: 2 ports detected [ 2.700000] mice: PS/2 mouse device common for all mice [ 2.710000] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.720000] s3c24xx-ts s3c2440-ts: driver attached, registering input device [ 2.730000] input: S3C24XX TouchScreen as /devices/virtual/input/input1 [ 2.740000] input: PCF50633 PMU events as /devices/virtual/input/input2 [ 2.760000] input: lis302-1 (top) as /devices/virtual/input/input3 [ 2.770000] lis302dl spi3.0: Found lis302-1 (top) [ 2.780000] input: lis302-2 (bottom) as /devices/virtual/input/input4 [ 2.800000] lis302dl spi3.1: Found lis302-2 (bottom) [ 2.810000] pcf50633-rtc pcf50633-rtc.0: rtc core: registered pcf50633-rtc as rtc0 [ 2.820000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics [ 2.830000] i2c /dev entries driver [ 2.910000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc [ 2.920000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics [ 2.930000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled [ 2.940000] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 2.960000] usbcore: registered new interface driver btusb [ 2.970000] cpuidle: using governor ladder [ 2.980000] s3c-sdi s3c2440-sdi: powered down. [ 2.990000] s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ [ 3.000000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). [ 3.010000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc [ 3.020000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. [ 3.030000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 3.040000] HIFInit [ 3.050000] Registered led device: gta02:red:aux [ 3.060000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 3.080000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 3.100000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 3.130000] usbcore: registered new interface driver usbhid [ 3.140000] usbhid: USB HID core driver [ 3.150000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). [ 3.170000] mmc0: queuing unknown CIS tuple 0x01 (3 bytes) [ 3.180000] mmc0: queuing unknown CIS tuple 0x1a (5 bytes) [ 3.200000] mmc0: queuing unknown CIS tuple 0x1b (8 bytes) [ 3.210000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). [ 3.230000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). [ 3.240000] mmc0: queuing unknown CIS tuple 0x80 (1 bytes) [ 3.250000] mmc0: queuing unknown CIS tuple 0x81 (1 bytes) [ 3.260000] mmc0: queuing unknown CIS tuple 0x82 (1 bytes) [ 3.270000] mmc0: new SDIO card at address 0001 [ 3.450000] No device for DAI s3c24xx-i2s [ 3.460000] No device for DAI Bluetooth [ 3.480000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok [ 3.490000] asoc: WM8753 Voice <-> Bluetooth mapping ok [ 3.870000] input: neo1973gta02 Headset Jack as /devices/platform/soc-audio/sound/card0/input5 [ 3.910000] ALSA device list: [ 3.920000] #0: neo1973gta02 (WM8753) [ 3.930000] TCP westwood registered [ 3.940000] NET: Registered protocol family 17 [ 3.950000] Bridge firewalling registered [ 4.010000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1) [ 4.030000] registered taskstats version 1 [ 4.070000] regulator_init_complete: incomplete constraints, leaving memldo on [ 4.080000] AR6000 Reg Code = 0x40000060 [ 4.110000] regulator_init_complete: incomplete constraints, leaving hcldo on [ 4.260000] pcf50633-rtc pcf50633-rtc.0: setting system clock to 2000-01-01 00:00:22 UTC (946684822) [ 4.270000] Waiting 1sec before mounting root device... [ 4.360000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 0kHz div=0 (req: 0kHz). Bus width=0 [ 4.390000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.420000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.440000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.510000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.530000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.540000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.570000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.590000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 [ 4.610000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=0 [ 4.620000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 21000kHz). Bus width=2 [ 4.630000] mmc1: new high speed SDHC card at address 1234 [ 4.640000] mmcblk0: mmc1:1234 SA08G 7.41 GiB [ 4.650000] mmcblk0: p1 p2 [ 5.300000] kjournald starting. Commit interval 5 seconds [ 5.310000] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode [ 5.330000] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 5.340000] devtmpfs: error mounting -2 [ 5.350000] Freeing init memory: 124K [ 5.360000] Failed to execute /sbin/init. Attempting defaults... [ 5.370000] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. [ 5.380000] Backtrace: [ 5.400000] [<c002b3ac>] (dump_backtrace+0x0/0x10c) from [<c0333ae0>] (dump_stack+0x18/0x1c) [ 5.410000] r6:00000000 r5:c0023850 r4:c0433bb0 r3:ffffffff [ 5.420000] [<c0333ac8>] (dump_stack+0x0/0x1c) from [<c0333ce4>] (panic+0x4c/0xc0) [ 5.430000] [<c0333c98>] (panic+0x0/0xc0) from [<c0333aa8>] (init_post+0xa4/0xc4) [ 5.440000] r3:c7816cc0 r2:0000000e r1:00000080 r0:c03b67ec [ 5.450000] [<c0333a04>] (init_post+0x0/0xc4) from [<c0008aa4>] (kernel_init+0x110/0x140) [ 5.460000] r4:c0023850 r3:c7401794 [ 5.470000] [<c0008994>] (kernel_init+0x0/0x140) from [<c003f308>] (do_exit+0x0/0x66c) [ 5.480000] r5:00000000 r4:00000000 [ 5.500000] Rebooting in 20 seconds..
