Package: memtest86+
Version: 4.20-1
memtest86+ dies immediately at boot time. I see the blue
background flash up, then the PC does a reset.
Processor is an Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz.
dmidecode lists the RAM as:
Handle 0x0027, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0024
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: Kingston
Serial Number: 8B2E163
Asset Tag: AssetTagNum0
Part Number: 9905458-017.A00LF
Handle 0x002A, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0024
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK1
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: Kingston
Serial Number: 0820FE7
Asset Tag: AssetTagNum1
Part Number: 9905471-006.A01LF
Handle 0x002D, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0024
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM2
Bank Locator: BANK2
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: Kingston
Serial Number: 8A2E523
Asset Tag: AssetTagNum2
Part Number: 9905458-017.A00LF
Handle 0x0030, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x0024
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM3
Bank Locator: BANK3
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: Kingston
Serial Number: 02201A7
Asset Tag: AssetTagNum3
Part Number: 9905471-006.A01LF
Please note that there are 2 different part numbers. The PC
was upgraded from 8 to 16GByte. A similar PC with 4 identical
DIMMs shows no problem with memtest86+.
There are no runtime problems with this PC, as it seems.
Regards
Harri
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
