Package: linux-2.6
Version: 2.6.38-4
Severity: normal
When attempting to modprobe fuse (needed for ntfs-3g), it fails on kernel
2.6.38-2, leaving one line with error message in dmesg:
[17105.390564] fuse: Unknown symbol kstrtoull (err 0)
I tried reinstalling the kernel package (apt-get install --reinstall ...) to
rule out
possibility of the file being somehow replaced by some other version, but
problem persisted.
# modprobe fuse
WARNING: All config files need .conf: /etc/modprobe.d/00local, it will be
ignored in a future release.
FATAL: Error inserting fuse
(/lib/modules/2.6.38-2-amd64/kernel/fs/fuse/fuse.ko): Unknown symbol in module,
or unknown parameter (see dmesg)
# dmesg | tail
....
[17105.390564] fuse: Unknown symbol kstrtoull (err 0)
-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (b...@decadent.org.uk) (gcc
version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=/dev/mapper/sda5_crypt ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[16985.776538] Booting Node 0 Processor 3 APIC 0x3
[16985.868026] Switched to NOHz mode on CPU #3
[16985.894688] NMI watchdog enabled, takes one hw-pmu counter.
[16985.896182] CPU3 is up
[16985.899688] ACPI: Waking up from system sleep state S3
[16986.374227] i915 0000:00:02.0: restoring config space at offset 0xf (was
0x100, writing 0x10a)
[16986.374253] i915 0000:00:02.0: restoring config space at offset 0x7 (was
0x0, writing 0x90300000)
[16986.374270] i915 0000:00:02.0: restoring config space at offset 0x6 (was
0x8, writing 0x80000008)
[16986.374286] i915 0000:00:02.0: restoring config space at offset 0x5 (was
0x1, writing 0x30b1)
[16986.374303] i915 0000:00:02.0: restoring config space at offset 0x4 (was
0x0, writing 0x90480000)
[16986.374320] i915 0000:00:02.0: restoring config space at offset 0x1 (was
0x900000, writing 0x900407)
[16986.374374] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0,
writing 0x90400000)
[16986.374392] pci 0000:00:02.1: restoring config space at offset 0x1 (was
0x900000, writing 0x900007)
[16986.374500] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was
0x100, writing 0x10a)
[16986.374527] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was
0x10001, writing 0x90719061)
[16986.374545] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was
0x0, writing 0x90209020)
[16986.374562] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was
0x0, writing 0x4040)
[16986.374580] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was
0x0, writing 0x10100)
[16986.374601] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was
0x810000, writing 0x810010)
[16986.374621] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100407)
[16986.374701] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was
0x400, writing 0x40b)
[16986.374727] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was
0x10001, writing 0x90919081)
[16986.374745] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was
0x0, writing 0x90109010)
[16986.374763] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was
0x0, writing 0x2020)
[16986.374780] pcieport 0000:00:1c.3: restoring config space at offset 0x6 (was
0x0, writing 0x20200)
[16986.374801] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was
0x810000, writing 0x810010)
[16986.374821] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was
0x100000, writing 0x100407)
[16986.374889] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was
0x100, writing 0x10a)
[16986.374917] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was
0x1, writing 0x3081)
[16986.374945] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was
0x2800000, writing 0x2800001)
[16986.374980] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was
0x200, writing 0x20a)
[16986.375008] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was
0x1, writing 0x3061)
[16986.375036] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was
0x2800000, writing 0x2800001)
[16986.375070] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was
0x300, writing 0x30a)
[16986.375098] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was
0x1, writing 0x3041)
[16986.375127] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was
0x2800000, writing 0x2800001)
[16986.375172] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was
0x400, writing 0x40b)
[16986.375202] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was
0x1, writing 0x3021)
[16986.375231] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was
0x2800000, writing 0x2800001)
[16986.375277] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was
0x100, writing 0x10a)
[16986.375313] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was
0x0, writing 0x90505000)
[16986.375335] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was
0x2900000, writing 0x2900002)
[16986.375385] pci 0000:00:1e.0: restoring config space at offset 0xf (was
0x20000, writing 0x200ff)
[16986.375412] pci 0000:00:1e.0: restoring config space at offset 0x9 (was
0x10001, writing 0x1fff1)
[16986.375430] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0,
writing 0x90009000)
[16986.375448] pci 0000:00:1e.0: restoring config space at offset 0x7 (was
0x22800000, writing 0x228000f0)
[16986.375466] pci 0000:00:1e.0: restoring config space at offset 0x6 (was
0x20000000, writing 0x20030300)
[16986.375491] pci 0000:00:1e.0: restoring config space at offset 0x1 (was
0x100100, writing 0x100107)
[16986.375611] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was
0x2b00002, writing 0x2b00407)
[16986.375698] wl 0000:01:00.0: restoring config space at offset 0xf (was
0x100, writing 0x105)
[16986.375740] wl 0000:01:00.0: restoring config space at offset 0x4 (was 0x4,
writing 0x90200004)
[16986.375759] wl 0000:01:00.0: restoring config space at offset 0x3 (was 0x0,
writing 0x10)
[16986.375780] wl 0000:01:00.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100006)
[16986.375871] sky2 0000:02:00.0: restoring config space at offset 0xf (was
0x100, writing 0x10b)
[16986.375894] sky2 0000:02:00.0: restoring config space at offset 0xc (was
0x0, writing 0xfffe0000)
[16986.375924] sky2 0000:02:00.0: restoring config space at offset 0x6 (was
0x1, writing 0x2001)
[16986.375945] sky2 0000:02:00.0: restoring config space at offset 0x4 (was
0x4, writing 0x90100004)
[16986.375964] sky2 0000:02:00.0: restoring config space at offset 0x3 (was
0x0, writing 0x10)
[16986.375985] sky2 0000:02:00.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100407)
[16986.376312] PM: early resume of devices complete after 2.213 msecs
[16986.376514] i915 0000:00:02.0: setting latency timer to 64
[16986.376570] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[16986.376592] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[16986.376632] usb usb2: root hub lost power or was reset
[16986.376674] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[16986.376693] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[16986.376722] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[16986.376732] usb usb3: root hub lost power or was reset
[16986.376741] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[16986.376767] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[16986.376778] usb usb4: root hub lost power or was reset
[16986.376788] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[16986.376814] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[16986.376826] usb usb5: root hub lost power or was reset
[16986.376836] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[16986.376861] pci 0000:00:1e.0: setting latency timer to 64
[16986.376912] ahci 0000:00:1f.2: setting latency timer to 64
[16986.376955] wl 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[16986.376974] wl 0000:01:00.0: setting latency timer to 64
[16986.377064] sky2 0000:02:00.0: wake-up capability disabled by ACPI
[16986.377081] sky2 0000:02:00.0: PME# disabled
[16986.380944] sd 0:0:0:0: [sda] Starting disk
[16986.390771] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[16986.390800] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[16986.390853] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[16986.391091] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[16986.391118] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ
19
[16986.391138] HDA Intel 0000:00:1b.0: setting latency timer to 64
[16986.391247] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[16986.740239] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[16986.896218] btusb 2-1:1.0: no reset_resume for driver btusb?
[16986.896230] btusb 2-1:1.1: no reset_resume for driver btusb?
[16988.772245] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[16988.773388] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device
(Stat=0x51 Err=0x04)
[16988.777960] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device
(Stat=0x51 Err=0x04)
[16988.778221] ata1.00: configured for UDMA/100
[16988.819428] PM: resume of devices complete after 2443.028 msecs
[16988.836672] PM: Finishing wakeup.
[16988.836680] Restarting tasks ... done.
[16988.842584] video LNXVIDEO:01: Restoring backlight state
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Mini 5103
product_version:
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68PGP Ver. F.02
board_vendor: Hewlett-Packard
board_name: 1608
board_version: KBC Version 92.04
** Loaded modules:
Module Size Used by
michael_mic 12546 8
arc4 12458 4
ecb 12737 4
lib80211_crypt_tkip 17179 0
wl 2518027 0
lib80211 12990 2 lib80211_crypt_tkip,wl
btrfs 428821 0
crc32c 12656 1
libcrc32c 12426 1 btrfs
ufs 61682 0
qnx4 13184 0
hfsplus 75370 0
hfs 45666 0
minix 27349 0
ntfs 166790 0
vfat 17165 0
msdos 17070 0
fat 45206 2 vfat,msdos
jfs 140566 0
reiserfs 198112 0
ext4 285166 0
jbd2 65157 1 ext4
ext2 62796 0
sco 17555 2
bnep 17424 2
rfcomm 32744 0
l2cap 40163 6 bnep,rfcomm
crc16 12343 2 ext4,l2cap
parport_pc 22191 0
ppdev 12725 0
lp 17190 0
parport 31650 3 parport_pc,ppdev,lp
acpi_cpufreq 12849 1
mperf 12411 1 acpi_cpufreq
cpufreq_stats 12713 0
cpufreq_userspace 12576 0
cpufreq_powersave 12454 0
cpufreq_conservative 13878 0
binfmt_misc 12914 1
uinput 17392 1
deflate 12551 0
zlib_deflate 25466 2 btrfs,deflate
ctr 12979 0
twofish_generic 16569 0
twofish_x86_64 12501 0
twofish_common 20544 2 twofish_generic,twofish_x86_64
camellia 29025 0
serpent 29015 0
blowfish 16632 0
cast5 24829 0
des_generic 20851 0
xcbc 12709 0
rmd160 16640 0
sha512_generic 12625 0
sha1_generic 12575 0
hmac 12753 0
crypto_null 12732 0
af_key 31250 0
ext3 112218 1
jbd 41698 1 ext3
mbcache 12930 3 ext4,ext2,ext3
coretemp 12784 0
loop 22515 0
snd_hda_codec_idt 53371 1
snd_hda_intel 25946 0
snd_hda_codec 67647 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 13148 1 snd_hda_codec
snd_pcm_oss 40662 0
snd_mixer_oss 17905 1 snd_pcm_oss
snd_pcm 67327 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 12848 0
snd_rawmidi 22963 1 snd_seq_midi
snd_seq_midi_event 13316 1 snd_seq_midi
i915 315266 2
snd_seq 44678 2 snd_seq_midi,snd_seq_midi_event
drm_kms_helper 26893 1 i915
uvcvideo 57386 0
snd_timer 22658 2 snd_pcm,snd_seq
snd_seq_device 13155 3 snd_seq_midi,snd_rawmidi,snd_seq
joydev 17138 0
tpm_tis 13125 0
drm 165567 3 i915,drm_kms_helper
videodev 57418 1 uvcvideo
v4l2_compat_ioctl32 16575 1 videodev
btusb 17417 1
hp_accel 21104 0
tpm 17726 1 tpm_tis
i2c_algo_bit 12834 1 i915
tpm_bios 12903 1 tpm
hp_wmi 13094 0
sparse_keymap 12760 1 hp_wmi
lis3lv02d 17723 1 hp_accel
i2c_core 23725 5 i915,drm_kms_helper,drm,videodev,i2c_algo_bit
bluetooth 55503 9 sco,bnep,rfcomm,l2cap,btusb
psmouse 55199 0
serio_raw 12878 0
wmi 13202 1 hp_wmi
snd 52280 11
snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ac 12624 0
battery 13070 0
evdev 17475 16
input_polldev 12906 1 lis3lv02d
soundcore 13014 1 snd
power_supply 13475 2 ac,battery
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
rfkill 19014 3 hp_wmi,bluetooth
video 17553 1 i915
container 12581 0
button 12994 1 i915
processor 27431 5 acpi_cpufreq
xfs 603664 1
exportfs 12591 1 xfs
sha256_generic 16797 2
cryptd 14463 0
aes_x86_64 16796 16
aes_generic 37122 1 aes_x86_64
cbc 12747 8
dm_crypt 22256 1
dm_mod 62467 3 dm_crypt
sd_mod 35501 3
crc_t10dif 12348 1 sd_mod
uhci_hcd 26290 0
ahci 25089 2
libahci 22568 1 ahci
libata 147240 2 ahci,libahci
ehci_hcd 39529 0
scsi_mod 161457 2 sd_mod,libata
usbcore 122908 5 uvcvideo,btusb,uhci_hcd,ehci_hcd
sky2 48963 0
fan 12674 0
thermal 17330 0
nls_base 12753 7 hfsplus,hfs,ntfs,vfat,fat,jfs,usbcore
thermal_sys 17939 4 video,processor,fan,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
(rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a011] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at 90480000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 30b0 [size=8]
Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at 90300000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated
Graphics Controller [8086:a012] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at 90400000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller [8086:27d8] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at 90500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: 90200000-902fffff
Prefetchable memory behind bridge: 0000000090600000-00000000907fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port
4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 90100000-901fffff
Prefetchable memory behind bridge: 0000000090800000-00000000909fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 90505000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: 90000000-900fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller
[8086:27bc] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI
Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 30a8 [size=8]
Region 1: I/O ports at 30bc [size=4]
Region 2: I/O ports at 30a0 [size=8]
Region 3: I/O ports at 30b8 [size=4]
Region 4: I/O ports at 3000 [size=32]
Region 5: Memory at 90504000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
01:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n
Wireless LAN Controller [14e4:4727] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1483]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 90200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. Yukon Optima
88E8059 [PCIe Gigabit Ethernet Controller with AVB] [11ab:4381] (rev 11)
Subsystem: Hewlett-Packard Company Device [103c:1608]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at 90100000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Expansion ROM at 90800000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 05c8:0403 Cheng Uei Precision Industry Co., Ltd
(Foxlink)
Bus 002 Device 002: ID 0a5c:21b4 Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.99~rc1-13 GRand Unified Bootloader, version
ii linux-doc-2.6.38 2.6.38-4 Linux kernel specific documentatio
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
