Package: linux-2.6
Version: 2.6.38-3
Severity: normal
This machine is a laptop and I just upraded from 2.6.32 to 2.6.38-3.
When I plug in an external mouse it works for about 60 seconds and then just
stops.
If I unplug it and plug it in again it works again for about 60 secs. I've tried
all 3 usb ports with the same result.
Each time the mouse stops working I see a "PCI INT X disabled" message in the
kernel log.
-- Package-specific info:
** Version:
Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (b...@decadent.org.uk) (gcc
version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-amd64
root=UUID=b9dc7b52-178d-41d2-90dc-5ffb7af06598 ro quiet
** Not tainted
** Kernel log:
[ 7836.570626] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7836.712355] usb 6-1: USB disconnect, address 2
[ 7838.808302] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 7848.228070] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd8826800-0xd8826bff]
(PCI address [0xd8826800-0xd8826bff])
[ 7848.228103] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was
0x400, writing 0x40a)
[ 7848.228140] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was
0x2900000, writing 0x2900002)
[ 7848.228189] ehci_hcd 0000:00:1d.7: PME# disabled
[ 7848.228210] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 7848.228223] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7848.244293] e1000e 0000:00:19.0: BAR 0: set to [mem 0xd8800000-0xd881ffff]
(PCI address [0xd8800000-0xd881ffff])
[ 7848.244309] e1000e 0000:00:19.0: BAR 1: set to [mem 0xd8824000-0xd8824fff]
(PCI address [0xd8824000-0xd8824fff])
[ 7848.244322] e1000e 0000:00:19.0: BAR 2: set to [io 0x70e0-0x70ff] (PCI
address [0x70e0-0x70ff])
[ 7848.244354] e1000e 0000:00:19.0: restoring config space at offset 0xf (was
0x100, writing 0x10a)
[ 7848.244392] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was
0x100000, writing 0x100007)
[ 7848.244450] e1000e 0000:00:19.0: PME# disabled
[ 7848.244583] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 7848.368494] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7848.368510] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7848.624041] usb 6-1: new low speed USB device using uhci_hcd and address 3
[ 7848.800360] usb 6-1: New USB device found, idVendor=046d, idProduct=c045
[ 7848.800364] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7848.800367] usb 6-1: Product: USB-PS/2 Optical Mouse
[ 7848.800370] usb 6-1: Manufacturer: Logitech
[ 7848.817588] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input14
[ 7848.817723] generic-usb 0003:046D:C045.0002: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
[ 7850.824274] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 7850.824348] ehci_hcd 0000:00:1d.7: PME# enabled
[ 7906.828364] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 7935.443678] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7935.443693] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7935.584276] usb 6-1: USB disconnect, address 3
[ 7937.824365] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 7941.432222] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd8826800-0xd8826bff]
(PCI address [0xd8826800-0xd8826bff])
[ 7941.432253] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was
0x400, writing 0x40a)
[ 7941.432291] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was
0x2900000, writing 0x2900002)
[ 7941.432340] ehci_hcd 0000:00:1d.7: PME# disabled
[ 7941.432361] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 7941.432374] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7941.684633] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7941.684648] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7941.940241] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 7942.117513] usb 8-2: New USB device found, idVendor=046d, idProduct=c045
[ 7942.117522] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7942.117529] usb 8-2: Product: USB-PS/2 Optical Mouse
[ 7942.117533] usb 8-2: Manufacturer: Logitech
[ 7942.134936] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input15
[ 7942.135351] generic-usb 0003:046D:C045.0003: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0
[ 7943.824093] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 7943.824170] ehci_hcd 0000:00:1d.7: PME# enabled
[ 7947.876291] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 8008.214419] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8008.214434] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8008.356361] usb 8-2: USB disconnect, address 2
[ 8010.808301] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 8283.564317] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd8826800-0xd8826bff]
(PCI address [0xd8826800-0xd8826bff])
[ 8283.564353] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was
0x400, writing 0x40a)
[ 8283.564391] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was
0x2900000, writing 0x2900002)
[ 8283.564452] ehci_hcd 0000:00:1d.7: PME# disabled
[ 8283.564474] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 8283.564487] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8283.600669] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8283.600685] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8283.856333] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 8284.032511] usb 8-2: New USB device found, idVendor=046d, idProduct=c045
[ 8284.032520] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8284.032526] usb 8-2: Product: USB-PS/2 Optical Mouse
[ 8284.032531] usb 8-2: Manufacturer: Logitech
[ 8284.050473] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input16
[ 8284.050897] generic-usb 0003:046D:C045.0004: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-2/input0
[ 8285.824097] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 8285.824170] ehci_hcd 0000:00:1d.7: PME# enabled
[ 8313.828381] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 8703.504042] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8703.504058] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8703.648294] usb 8-2: USB disconnect, address 3
[ 8705.824291] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 8711.920065] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd8826800-0xd8826bff]
(PCI address [0xd8826800-0xd8826bff])
[ 8711.920085] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was
0x400, writing 0x40a)
[ 8711.920111] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was
0x2900000, writing 0x2900002)
[ 8711.920143] ehci_hcd 0000:00:1d.7: PME# disabled
[ 8711.920155] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 8711.920163] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 8712.172710] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8712.172725] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8712.428256] usb 8-1: new low speed USB device using uhci_hcd and address 4
[ 8712.605139] usb 8-1: New USB device found, idVendor=046d, idProduct=c045
[ 8712.605148] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 8712.605154] usb 8-1: Product: USB-PS/2 Optical Mouse
[ 8712.605159] usb 8-1: Manufacturer: Logitech
[ 8712.623252] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input17
[ 8712.623695] generic-usb 0003:046D:C045.0005: input,hidraw0: USB HID v1.10
Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 8714.824051] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 8714.824122] ehci_hcd 0000:00:1d.7: PME# enabled
[ 8752.828121] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 8768.797780] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8768.797796] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8773.004628] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 9128.394322] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9128.394338] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 9132.844357] uhci_hcd 0000:00:1d.2: PCI INT C disabled
** Model information
sys_vendor: Hewlett-Packard
product_name: HP EliteBook 6930p
product_version: F.16
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68PCU Ver. F.16
board_vendor: Hewlett-Packard
board_name: 30DB
board_version: KBC Version 87.2A
** Loaded modules:
Module Size Used by
cryptd 14463 0
aes_x86_64 16796 3
aes_generic 37122 1 aes_x86_64
usbhid 39900 0
hid 72616 1 usbhid
btusb 17417 2
iptable_filter 12536 1
ip_tables 21818 1 iptable_filter
x_tables 18839 2 iptable_filter,ip_tables
tun 18084 2
acpi_cpufreq 12849 1
mperf 12411 1 acpi_cpufreq
cpufreq_powersave 12454 0
cpufreq_stats 12713 0
cpufreq_userspace 12576 0
cpufreq_conservative 13878 0
sco 17555 2
bnep 17424 2
rfcomm 32744 8
l2cap 40163 16 bnep,rfcomm
bluetooth 55503 9 btusb,sco,bnep,rfcomm,l2cap
ppdev 12725 0
lp 17190 0
binfmt_misc 12914 1
kvm_intel 49947 0
uinput 17392 1
kvm 263288 1 kvm_intel
fuse 61520 1
loop 22515 0
firewire_sbp2 17825 0
snd_hda_codec_analog 77560 1
arc4 12458 2
snd_hda_intel 25946 2
snd_hda_codec 67647 2 snd_hda_codec_analog,snd_hda_intel
ecb 12737 2
tpm_infineon 16875 0
joydev 17138 0
snd_hwdep 13148 1 snd_hda_codec
pata_pcmcia 16789 1
snd_pcm_oss 40662 0
snd_mixer_oss 17905 1 snd_pcm_oss
snd_pcm 67327 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
i915 315266 2
iwlagn 141628 0
iwlcore 59776 1 iwlagn
drm_kms_helper 26893 1 i915
snd_seq_midi 12848 0
drm 165567 3 i915,drm_kms_helper
snd_rawmidi 22963 1 snd_seq_midi
snd_seq_midi_event 13316 1 snd_seq_midi
snd_seq 44678 2 snd_seq_midi,snd_seq_midi_event
hp_accel 21104 0
lis3lv02d 17723 1 hp_accel
mac80211 180997 2 iwlagn,iwlcore
snd_timer 22658 2 snd_pcm,snd_seq
snd_seq_device 13155 3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211 126017 3 iwlagn,iwlcore,mac80211
parport_pc 22191 1
hp_wmi 13094 0
sparse_keymap 12760 1 hp_wmi
rfkill 19014 5 bluetooth,cfg80211,hp_wmi
i2c_algo_bit 12834 1 i915
uvcvideo 57386 0
videodev 57418 1 uvcvideo
v4l2_compat_ioctl32 16575 1 videodev
psmouse 55199 0
serio_raw 12878 0
pcspkr 12579 0
evdev 17475 26
i2c_core 23725 5 i915,drm_kms_helper,drm,i2c_algo_bit,videodev
parport 31650 3 ppdev,lp,parport_pc
input_polldev 12906 1 lis3lv02d
container 12581 0
snd 52280 15
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcmcia 32719 1 pata_pcmcia
soundcore 13014 1 snd
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
ac 12624 0
yenta_socket 22601 0
tpm_tis 13125 0
tpm 17726 2 tpm_infineon,tpm_tis
tpm_bios 12903 1 tpm
pcmcia_rsrc 17483 1 yenta_socket
processor 27431 3 acpi_cpufreq
button 12994 1 i915
battery 13070 0
pcmcia_core 18333 3 pcmcia,yenta_socket,pcmcia_rsrc
power_supply 13475 2 ac,battery
wmi 13202 1 hp_wmi
video 17553 1 i915
ext4 285166 2
mbcache 12930 1 ext4
jbd2 65157 1 ext4
crc16 12343 2 l2cap,ext4
sg 25769 0
sr_mod 21824 0
sd_mod 35501 4
cdrom 35134 1 sr_mod
crc_t10dif 12348 1 sd_mod
uhci_hcd 26290 0
ata_generic 12479 0
ahci 25089 3
libahci 22568 1 ahci
ehci_hcd 39529 0
libata 147240 4 pata_pcmcia,ata_generic,ahci,libahci
sdhci_pci 13184 0
sdhci 21727 1 sdhci_pci
mmc_core 58589 1 sdhci
firewire_ohci 30887 0
scsi_mod 161457 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
e1000e 123965 0
usbcore 122908 6 usbhid,btusb,uvcvideo,uhci_hcd,ehci_hcd
firewire_core 47683 2 firewire_sbp2,firewire_ohci
crc_itu_t 12347 1 firewire_core
nls_base 12753 1 usbcore
thermal 17330 0
thermal_sys 17939 3 processor,video,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA
controller])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 7138 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series
Chipset MEI Controller [8086:2a44] (rev 07)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d8827000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:03.2 IDE interface [0101]: Intel Corporation Mobile 4 Series Chipset PT IDER
Controller [8086:2a46] (rev 07) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at 7130 [disabled] [size=8]
Region 1: I/O ports at 714c [disabled] [size=4]
Region 2: I/O ports at 7128 [disabled] [size=8]
Region 3: I/O ports at 7148 [disabled] [size=4]
Region 4: I/O ports at 7100 [disabled] [size=16]
Capabilities: <access denied>
00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series Chipset AMT
SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 7120 [size=8]
Region 1: Memory at d8825000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network
Connection [8086:10f5] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d8800000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at d8824000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 70e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 70c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 70a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 7080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 19
Region 0: Memory at d8826c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at d8820000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: d8700000-d87fffff
Prefetchable memory behind bridge: 00000000d8900000-00000000d8afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: d8600000-d86fffff
Prefetchable memory behind bridge: 00000000d8b00000-00000000d8cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=43, sec-latency=0
I/O behind bridge: 00005000-00006fff
Memory behind bridge: d4600000-d85fffff
Prefetchable memory behind bridge: 00000000d8d00000-00000000d8efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=44, subordinate=84, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d0600000-d45fffff
Prefetchable memory behind bridge: 00000000d8f00000-00000000d90fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 7060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at 7040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 7020 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 20
Region 0: Memory at d8826800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=85, subordinate=89, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0500000-d05fffff
Prefetchable memory behind bridge: 00000000dc000000-00000000dfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller
[8086:2917] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI
Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at 7118 [size=8]
Region 1: I/O ports at 7144 [size=4]
Region 2: I/O ports at 7110 [size=8]
Region 3: I/O ports at 7140 [size=4]
Region 4: I/O ports at 7000 [size=32]
Region 5: Memory at d8826000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
02:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300
[8086:4236]
Subsystem: Intel Corporation Device [8086:1011]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at d8600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
85:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[1180:0832] (rev 06) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0501000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
85:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 25)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d0501900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
85:09.2 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev bb)
Subsystem: Hewlett-Packard Company Device [103c:30db]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=85, secondary=86, subordinate=89, sec-latency=176
Memory window 0: dc000000-dffff000 (prefetchable)
Memory window 1: f0000000-f3fff000
I/O window 0: 00002000-000020ff
I/O window 1: 00002400-000024ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 04f2:b053 Chicony Electronics Co., Ltd
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 003 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN)
Interface [Integrated Module]
Bus 008 Device 004: ID 046d:c045 Logitech, Inc. Optical Mouse
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.38-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=ANSI_X3.4-1968)
(ignored: LC_ALL set to C)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.38-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 3.2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.38-2-amd64 recommends:
ii firmware-linux-free 3 Binary firmware for various driver
Versions of packages linux-image-2.6.38-2-amd64 suggests:
ii grub-pc 1.98+20100804-14 GRand Unified Bootloader, version
pn linux-doc-2.6.38 <none> (no description available)
Versions of packages linux-image-2.6.38-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.29 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.38-2-amd64/postinst/missing-firmware-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/prerm/removing-running-kernel-2.6.38-2-amd64: true
linux-image-2.6.38-2-amd64/postinst/ignoring-do-bootloader-2.6.38-2-amd64:
linux-image-2.6.38-2-amd64/postinst/depmod-error-initrd-2.6.38-2-amd64: false
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
