On Sat, 03 Sep 2005, Iván Blanco wrote: > Hi, I have two big problems, the most important is the first. > Thanks for the great job you do. > > 1) > every 5-10 seconds show this message on console and i can?t connect to > Internet or Lan: > > NETDEV WATCHDOG: eth0: transmit timed out ) > > 2) > This mesage appear when load linux: > ... > PCI: Using ACPI for IRQ routing > ** PCI interrupts are no longer routed automatically. If this > ** causes a device to stop working, it is probably because the > ** driver failed to call pci_enable_device(). As a temporary > ** workaround, the "pci=routeirq" argument restores the old > ** behavior. If this argument makes the device work again, > ** please email the output of "lspci" to [EMAIL PROTECTED] > ** so I can fix the driver. > ... > > I am using Debian GNU/Linux, IBM PC 300 GL, 196 MB, 40 GB SEAGATE, > REALTEK 8139, NO CD, NO FLOPPY, NO KEYBOARD, NO SCREEN, NO MOUSE. > > lspci output: > > 0000:00:00.0 Host bridge: Intel Corp. 440LX/EX - 82443LX/EX Host bridge (rev > 03) > Flags: bus master, medium devsel, latency 32 > Memory at f0000000 (32-bit, prefetchable) [size=64M] > Capabilities: [a0] AGP version 1.0 > > 0000:00:01.0 PCI bridge: Intel Corp. 440LX/EX - 82443LX/EX AGP bridge > (rev 03) (prog-if 00 [Normal decode]) > Flags: bus master, 66MHz, medium devsel, latency 64 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 > Memory behind bridge: f5f00000-f7ffffff > > 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01) > Flags: bus master, medium devsel, latency 0 > > 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev > 01) (prog-if 80 [Master]) > Flags: bus master, medium devsel, latency 32 > I/O ports at fff0 [size=16] > > 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev > 01) (prog-if 00 [UHCI]) > Flags: bus master, medium devsel, latency 64, IRQ 15 > I/O ports at ff00 [size=32] > > 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01) > Flags: medium devsel, IRQ 9 > > 0000:00:14.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > Subsystem: Surecom Technology EP-320X-R > Flags: bus master, medium devsel, latency 208, IRQ 9 > I/O ports at 7800 [size=256] > Memory at f5efff00 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > > 0000:01:00.0 VGA compatible controller: Cirrus Logic GD 5465 [Laguna] > (rev 03) (prog-if 00 [VGA]) > Subsystem: Cirrus Logic: Unknown device 0000 > Flags: bus master, VGA palette snoop, 66MHz, medium devsel, > latency 128, IRQ 9 > Memory at f6000000 (32-bit, non-prefetchable) [size=32M] > Memory at f5ff0000 (32-bit, non-prefetchable) [size=64K] > Capabilities: [80] AGP version 1.0 > >
please try linux image 2.6.12 from unstable. try to boot with acpi=no pci=routeirq lapic=off you may need one of thore or maybe all this bug may be a duplicate of #321403, that's some upstream trouble. -- maks
