Package: mupen64plus Severity: normal Hello,
I have tried to configure it, so I deleted all the input from the D-Pad. (since all other key work) so tried on demo games frmo your site. OK, no dpad work. I tried with the joy pad left and the key up down left right that are on the gamepad (in my hand) to be working. So del allowed to remove the previous and change them. So I tried to play with all various ways, so A B ... worknig but still not the up down left right so I found by chance your post, and amazed that helped a lot and it worked with the config file. So it seems that into the configure > setup it does that (or me) wrong set .config/mupen64 so I decided (by chacne that you placed the config) to change the config file as you gave it (lovin' it) by ~/.config/mupen64plus$ leafpad blight_input.conf ~/.config/mupen64plus$ leafpad blight_input.conf [controller 0] plugged=1 plugin=1 mouse=0 device=0 DPad R=key( 274 ); button( 12 ); axis( None ); hat( None , None ); mouse( None ) DPad L=key( 276 ); button( 11 ); axis( None ); hat( None , None ); mouse( None ) DPad D=key( 275 ); button( 14 ); axis( None ); hat( None , None ); mouse( None ) DPad U=key( 273 ); button( 13 ); axis( None ); hat( None , None ); mouse( None ) Start=key( 0 ); button( 7 ); axis( None ); hat( None , None ); mouse( None ) Z Trig=key( 0 ); button( 4 ); axis( 2- ); hat( None , None ); mouse( None ) B Button=key( 0 ); button( 2 ); axis( None ); hat( None , None ); mouse( None ) A Button=key( 0 ); button( 0 ); axis( None ); hat( None , None ); mouse( None ) C Button R=key( 0 ); button( None ); axis( 3+ ); hat( None , None ); mouse( None ) C Button L=key( 0 ); button( None ); axis( 3- ); hat( None , None ); mouse( None ) C Button D=key( 0 ); button( None ); axis( 4+ ); hat( None , None ); mouse( None ) C Button U=key( 0 ); button( None ); axis( 4- ); hat( None , None ); mouse( None ) R Trig=key( 0 ); button( 5 ); axis( None ); hat( None , None ); mouse( None ) L Trig=key( 0 ); button( 4 ); axis( None ); hat( None , None ); mouse( None ) Mempak switch=key( 0 ); button( None ); axis( None ); hat( None , None ); mouse( None ) Rumblepak switch=key( 0 ); button( None ); axis( None ); hat( None , None ); mouse( None ) Y Axis=key( 0 , 0 ); button( None , None ); axis( 1- , 1+ ); hat( None , None , None ) X Axis=key( 0 , 0 ); button( None , None ); axis( 0- , 0+ ); hat( None , None , None ) [controller 1] plugged=1 plugin=1 mouse=0 device=1 DPad R=key( 0 ); button( 12 ); axis( None ); hat( None , None ); mouse( None ) DPad L=key( 0 ); button( 11 ); axis( None ); hat( None , None ); mouse( None ) DPad D=key( 0 ); button( 14 ); axis( None ); hat( None , None ); mouse( None ) DPad U=key( 0 ); button( 13 ); axis( None ); hat( None , None ); mouse( None ) Start=key( 0 ); button( 7 ); axis( None ); hat( None , None ); mouse( None ) Z Trig=key( 0 ); button( None ); axis( 2- ); hat( None , None ); mouse( None ) B Button=key( 0 ); button( 2 ); axis( None ); hat( None , None ); mouse( None ) A Button=key( 0 ); button( 0 ); axis( None ); hat( None , None ); mouse( None ) C Button R=key( 0 ); button( None ); axis( 3+ ); hat( None , None ); mouse( None ) C Button L=key( 0 ); button( None ); axis( 3- ); hat( None , None ); mouse( None ) C Button D=key( 0 ); button( None ); axis( 4+ ); hat( None , None ); mouse( None ) C Button U=key( 0 ); button( None ); axis( 4- ); hat( None , None ); mouse( None ) R Trig=key( 0 ); button( 5 ); axis( None ); hat( None , None ); mouse( None ) L Trig=key( 0 ); button( 4 ); axis( None ); hat( None , None ); mouse( None ) Mempak switch=key( 0 ); button( None ); axis( None ); hat( None , None ); mouse( None ) Rumblepak switch=key( 0 ); button( None ); axis( None ); hat( None , None ); mouse( None ) Y Axis=key( 0 , 0 ); button( None , None ); axis( 1- , 1+ ); hat( None , None , None ) X Axis=key( 0 , 0 ); button( None , None ); axis( 0- , 0+ ); hat( None , None , None ) and then it finally work!! really it works !! wow. so cool I would like to thank you. I can try to post you the issue that I had since now you explained me how to check what outputs hte settings... let's try ... I hope that it is bit more complete and more information -- System Information: Debian Release: 6.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages mupen64plus depends on: ii libbz2-1.0 1.0.5-6 high-quality block-sorting file co ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib ii libfreetype6 2.4.2-2.1 FreeType 2 font engine, shared lib ii libgcc1 1:4.4.5-8 GCC support library ii libgl1-mesa-glx [libgl 7.7.1-4 A free implementation of the OpenG ii libglib2.0-0 2.24.2-1 The GLib library of C routines ii libglu1-mesa [libglu1] 7.7.1-4 The OpenGL utility library (GLU) ii libgtk2.0-0 2.20.1-2 The GTK+ graphical user interface ii liblzma2 5.0.0-2 XZ-format compression library ii libpango1.0-0 1.28.3-1+squeeze1 Layout and rendering of internatio ii libpng12-0 1.2.44-1 PNG library - runtime ii libsamplerate0 0.1.7-3 Audio sample rate conversion libra ii libsdl-ttf2.0-0 2.0.9-1 ttf library for Simple DirectMedia ii libsdl1.2debian 1.2.14-6.1 Simple DirectMedia Layer ii libstdc++6 4.4.5-8 The GNU Standard C++ Library v3 ii libxdg-basedir1 1.1.1-1 Implementation of the XDG Base Dir ii ttf-dejavu-core 2.31-1 Vera font family derivate with add ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime mupen64plus recommends no packages. mupen64plus suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
