Package: linux-2.6
Version: 2.6.32-30
Severity: important
Tags: squeeze
I tried to load uvesafb in order to get frame buffer support for the native
1024x600 resolution of my JVC MP-XP731 laptop. So I added uvesafb to
'/etc/initramfs-tools/modules' and ran 'update-initramfs -u `uname -r`'. Then I
configured the graphics mode in the grub2 configuration (setting
GRUB_GFXMODE="1024x600,800x600,640x400" and GRUB_GFXPAYLOAD=keep as well adding
some lines in /etc/grub.d/00_header that evaluate these variables). While grub2
runs fine in the native 1024x600 resolution now, the kernel messages on boot
time have disappeared. The system seems to be running and responding to
keyboard input, i.e. I can blindly log in and restart my laptop. It looks like
the Kernel prints messages to the text console being invisible because the
graphics card stays in graphics mode.
Interestingly, if I wait some time in grub before booting, or after restarting
the system several times, it suddenly starts working: The system boots normally
into a graphical command line as intended.
However, I get the following error(s) from uvesafb:
[ 2.703725] uvesafb: Intel Corporation, Intel(r)852MG/852MGE/855MG/855MGE
Graphics Controller, Hardware Version 0.0, OEM:
Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS, VBE v3.0
[ 2.736775] uvesafb: VBIOS/hardware doesn't support DDC transfers
[ 2.736780] uvesafb: no monitor limits have been set, default refresh rate
will be used
[ 2.737005] uvesafb: scrolling: redraw
[ 2.737013] uvesafb: cannot reserve video memory at 0xf0000000
[ 2.737484] uvesafb: probe of uvesafb.0 failed with error -5
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-30) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/vg_jvchd-lv_root ro quiet
** Not tainted
** Kernel log:
[ 59.420478] lib80211_crypt: registered algorithm 'TKIP'
[ 64.260239] apm: BIOS not found.
[ 64.865070] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input8
[ 66.071094] lp: driver loaded but no devices found
[ 66.139181] ppdev: user-space parallel port driver
[ 68.860021] eth1: no IPv6 routers present
[ 69.147376] Bluetooth: Core ver 2.15
[ 69.147459] NET: Registered protocol family 31
[ 69.147463] Bluetooth: HCI device and connection manager initialized
[ 69.147469] Bluetooth: HCI socket layer initialized
[ 69.190356] Bluetooth: L2CAP ver 2.14
[ 69.190362] Bluetooth: L2CAP socket layer initialized
[ 69.449353] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 69.449360] Bluetooth: BNEP filters: protocol multicast
[ 69.507007] Bridge firewalling registered
[ 69.800141] Bluetooth: SCO (Voice Link) ver 0.6
[ 69.800147] Bluetooth: SCO socket layer initialized
[ 906.249230] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 916.830343] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 929.315550] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 1518.382215] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 1535.603203] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 1545.176515] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 1558.861733] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 1753.359559] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3460.229411] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3461.162602] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3472.293058] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3480.650379] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3493.039652] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3496.052048] ipw2100: exit - failed to send CARD_DISABLE command
[ 3496.052110] ipw2100: exit - failed to send CARD_DISABLE command
[ 3496.052245] ipw2100: exit - failed to send CARD_DISABLE command
[ 3955.138927] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3959.128177] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3968.605354] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3972.594657] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 3982.759966] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 4781.829280] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 4844.281670] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 4906.798105] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 4918.307400] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 4939.496505] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 5900.904069] ipw2100: exit - failed to send CARD_DISABLE command
[ 5900.904112] ipw2100: exit - failed to send CARD_DISABLE command
[ 5900.904125] ipw2100: exit - failed to send CARD_DISABLE command
[ 6118.704153] ipw2100: exit - failed to send CARD_DISABLE command
[ 6118.704199] ipw2100: exit - failed to send CARD_DISABLE command
[ 6118.704212] ipw2100: exit - failed to send CARD_DISABLE command
[ 6118.704223] ipw2100: exit - failed to send CARD_DISABLE command
[ 6118.704235] ipw2100: exit - failed to send CARD_DISABLE command
[ 6145.328175] ipw2100: exit - failed to send CARD_DISABLE command
[ 6145.328221] ipw2100: exit - failed to send CARD_DISABLE command
[ 6145.328235] ipw2100: exit - failed to send CARD_DISABLE command
[ 6145.328247] ipw2100: exit - failed to send CARD_DISABLE command
[ 6145.328259] ipw2100: exit - failed to send CARD_DISABLE command
[ 6336.808160] ipw2100: exit - failed to send CARD_DISABLE command
[ 6336.808199] ipw2100: exit - failed to send CARD_DISABLE command
[ 6336.808213] ipw2100: exit - failed to send CARD_DISABLE command
[ 6336.808225] ipw2100: exit - failed to send CARD_DISABLE command
[ 6336.808236] ipw2100: exit - failed to send CARD_DISABLE command
[ 6342.236156] ipw2100: exit - failed to send CARD_DISABLE command
[ 6342.236196] ipw2100: exit - failed to send CARD_DISABLE command
[ 6342.236209] ipw2100: exit - failed to send CARD_DISABLE command
[ 6342.236220] ipw2100: exit - failed to send CARD_DISABLE command
[ 6342.236232] ipw2100: exit - failed to send CARD_DISABLE command
[ 7232.266097] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 7431.451961] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 7432.977559] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 7435.510734] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 7511.354661] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 7516.064063] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 7521.173284] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 7524.826682] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 7531.872050] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 7534.965503] ipw2100: Fatal interrupt. Scheduling firmware restart.
[ 9272.352150] ipw2100: exit - failed to send CARD_DISABLE command
[ 9274.101665] ipw2100: Fatal interrupt. Scheduling firmware restart.
[10769.349634] ipw2100: Fatal interrupt. Scheduling firmware restart.
[10770.874927] ipw2100: Fatal interrupt. Scheduling firmware restart.
[10815.631046] ipw2100: Fatal interrupt. Scheduling firmware restart.
[10846.931789] ipw2100: Fatal interrupt. Scheduling firmware restart.
[10886.616473] ipw2100: Fatal interrupt. Scheduling firmware restart.
[10899.037831] ipw2100: Fatal interrupt. Scheduling firmware restart.
[11042.672691] ipw2100: Fatal interrupt. Scheduling firmware restart.
[11053.206054] ipw2100: Fatal interrupt. Scheduling firmware restart.
[11065.227283] ipw2100: Fatal interrupt. Scheduling firmware restart.
[11066.896557] ipw2100: Fatal interrupt. Scheduling firmware restart.
[11520.322999] ipw2100: Fatal interrupt. Scheduling firmware restart.
[11991.388180] ipw2100: exit - failed to send CARD_DISABLE command
[11991.388225] ipw2100: exit - failed to send CARD_DISABLE command
[11991.388238] ipw2100: exit - failed to send CARD_DISABLE command
[11991.388250] ipw2100: exit - failed to send CARD_DISABLE command
[11991.388262] ipw2100: exit - failed to send CARD_DISABLE command
[12066.496178] ipw2100: Fatal interrupt. Scheduling firmware restart.
[12163.299979] ipw2100: Fatal interrupt. Scheduling firmware restart.
[12166.185284] ipw2100: Fatal interrupt. Scheduling firmware restart.
[12538.235202] ipw2100: Fatal interrupt. Scheduling firmware restart.
[13017.763955] ipw2100: Fatal interrupt. Scheduling firmware restart.
[13018.233782] ipw2100: Fatal interrupt. Scheduling firmware restart.
** Model information
not available
** Loaded modules:
Module Size Used by
acpi_cpufreq 4951 0
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
sco 5857 2
bridge 33019 0
stp 996 1 bridge
bnep 7444 2
l2cap 21705 3 bnep
crc16 1027 1 l2cap
bluetooth 36319 5 sco,bnep,l2cap
rfkill 10264 2 bluetooth
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
uinput 4796 1
michael_mic 1506 8
arc4 974 4
ecb 1405 4
lib80211_crypt_tkip 6709 2
loop 9765 0
firewire_sbp2 9647 0
pcmcia 16194 0
snd_intel8x0 19595 0
snd_intel8x0m 8100 0
snd_ac97_codec 79148 2 snd_intel8x0,snd_intel8x0m
i915 222254 2
ac97_bus 710 1 snd_ac97_codec
drm_kms_helper 18309 1 i915
snd_pcm 47226 3 snd_intel8x0,snd_intel8x0m,snd_ac97_codec
yenta_socket 16403 1
drm 112088 3 i915,drm_kms_helper
snd_seq 35463 0
snd_timer 12258 2 snd_pcm,snd_seq
i2c_algo_bit 3497 1 i915
snd_seq_device 3673 1 snd_seq
rsrc_nonstatic 7057 1 yenta_socket
ipw2100 53316 0
i2c_core 12696 4 i915,drm_kms_helper,drm,i2c_algo_bit
pcmcia_core 20450 3 pcmcia,yenta_socket,rsrc_nonstatic
snd 34375 7
snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
libipw 18439 1 ipw2100
asus_laptop 11090 0
lib80211 2870 2 lib80211_crypt_tkip,libipw
soundcore 3450 1 snd
led_class 1757 1 asus_laptop
snd_page_alloc 5045 3 snd_intel8x0,snd_intel8x0m,snd_pcm
rng_core 2178 0
video 14605 1 i915
battery 3782 0
processor 26327 2 acpi_cpufreq
shpchp 21220 0
evdev 5609 14
pci_hotplug 18065 1 shpchp
pcspkr 1207 0
output 1204 1 video
psmouse 44657 0
serio_raw 2916 0
ac 1640 0
button 3598 1 i915
ext3 94212 4
jbd 32169 1 ext3
mbcache 3762 1 ext3
dm_mod 46082 9
uvesafb 17548 0
cn 3667 2 uvesafb
sd_mod 25977 4
crc_t10dif 1012 1 sd_mod
ata_generic 2067 0
ata_piix 17736 3
uhci_hcd 16057 0
firewire_ohci 16725 0
libata 115753 2 ata_generic,ata_piix
e100 22317 0
thermal 9206 0
ehci_hcd 27851 0
firewire_core 31243 2 firewire_sbp2,firewire_ohci
crc_itu_t 1035 1 firewire_core
mii 2714 1 e100
scsi_mod 101429 3 firewire_sbp2,sd_mod,libata
usbcore 98453 3 uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal_sys 9378 3 video,processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3580] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1801]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at <unassigned> (32-bit, prefetchable)
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3584] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:180a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller [8086:3585] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:180b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM
Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:1712]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at feb00000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at dc00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated
Graphics Device [8086:3582] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:1712]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00
[UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1808]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00
[UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1808]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03) (prog-if 00
[UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1808]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2
EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1809]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 83) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=05, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe700000-fe8fffff
Prefetchable memory behind bridge: de500000-de6fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge [8086:24cc] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE
Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:1808]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:1803]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at e000 [size=256]
Region 1: I/O ports at e100 [size=64]
Region 2: Memory at 20000400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at 20000600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 [Generic])
Subsystem: ASUSTeK Computer Inc. Device [1043:1716]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at e200 [size=256]
Region 1: I/O ports at e300 [size=128]
Capabilities: <access denied>
Kernel driver in use: Intel ICH Modem
01:03.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c475 [1180:0475] (rev b8)
Subsystem: ASUSTeK Computer Inc. Device [1043:1804]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe700000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 24000000-27fff000 (prefetchable)
Memory window 1: 28000000-2bfff000
I/O window 0: 0000c000-0000c0ff
I/O window 1: 0000c400-0000c4ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
01:03.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C551 IEEE 1394 Controller
[1180:0551] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:1807]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
01:05.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN 2100 3B
Mini PCI Adapter [8086:1043] (rev 04)
Subsystem: Intel Corporation MIM2000/Centrino [8086:2527]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2100
01:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VM (MOB)
Ethernet Controller [8086:103e] (rev 83)
Subsystem: ASUSTeK Computer Inc. Device [1043:1745]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at cc00 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0
APT prefers stable
APT policy: (700, 'stable'), (650, 'testing'), (600, 'unstable'), (500,
'squeeze-updates')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-30 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
