Package: laptop-mode-tools Version: 1.57-1 Severity: wishlist
* Kernel parameter block.events_dfl_poll_msecs controls the system polling interval (default is 0 which means disable) and /sys/block/*/events_poll_msecs control polling intervals for individual devices (default is -1 meaning use system setting). Note that if a device can report all supported events asynchronously and its polling interval isn't explicitly set, the device won't be polled regardless of the system polling interval. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.37-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages laptop-mode-tools depends on: ii lsb-base 3.2-27 Linux Standard Base 3.2 init scrip ii psmisc 22.13-1 utilities that use the proc file s ii util-linux 2.17.2-9.1 Miscellaneous system utilities Versions of packages laptop-mode-tools recommends: ii apmd 3.2.2-14 Utilities for Advanced Power Manag ii ethtool 1:2.6.37-1 display or change Ethernet device ii hal 0.5.14-5 Hardware Abstraction Layer ii hdparm 9.32-1 tune hard disk parameters for high ii net-tools 1.60-23 The NET-3 networking toolkit ii sdparm 1.06-3 Output and modify SCSI device para ii udev 166-1 /dev/ and hotplug management daemo ii wireless-tools 30~pre9-5 Tools for manipulating Linux Wirel laptop-mode-tools suggests no packages. -- Configuration Files: /etc/laptop-mode/conf.d/bluetooth.conf changed: DEBUG=0 CONTROL_BLUETOOTH=1 BATT_ENABLE_BLUETOOTH=0 AC_ENABLE_BLUETOOTH=1 BLUETOOTH_INTERFACES="hci0" /etc/laptop-mode/conf.d/exec-commands.conf changed: CONTROL_EXEC_COMMANDS="auto" DEBUG=0 BATT_EXEC_COMMAND_0="touch /tmp/laptop.foo" # Enable power saving feature 0 here LM_AC_EXEC_COMMAND_0="" # Enable power saving feature 0 here NOLM_AC_EXEC_COMMAND_0="" # Disable power saving feature 0 here BATT_EXEC_COMMAND_1="" # Enable power saving feature 1 here LM_AC_EXEC_COMMAND_1="" # Enable power saving feature 1 here NOLM_AC_EXEC_COMMAND_1="" # Disable power saving feature 1 here BATT_EXEC_COMMAND_2="" # Enable power saving feature 2 here LM_AC_EXEC_COMMAND_2="" # Enable power saving feature 2 here NOLM_AC_EXEC_COMMAND_2="" # Disable power saving feature 2 here BATT_EXEC_COMMAND_3="" # Enable power saving feature 3 here LM_AC_EXEC_COMMAND_3="" # Enable power saving feature 3 here NOLM_AC_EXEC_COMMAND_3="" # Disable power saving feature 3 here BATT_EXEC_COMMAND_4="" # Enable power saving feature 4 here LM_AC_EXEC_COMMAND_4="" # Enable power saving feature 4 here NOLM_AC_EXEC_COMMAND_4="" # Disable power saving feature 4 here BATT_EXEC_COMMAND_5="" # Enable power saving feature 5 here LM_AC_EXEC_COMMAND_5="" # Enable power saving feature 5 here NOLM_AC_EXEC_COMMAND_5="" # Disable power saving feature 5 here BATT_EXEC_COMMAND_6="" # Enable power saving feature 6 here LM_AC_EXEC_COMMAND_6="" # Enable power saving feature 6 here NOLM_AC_EXEC_COMMAND_6="" # Disable power saving feature 6 here BATT_EXEC_COMMAND_7="" # Enable power saving feature 7 here LM_AC_EXEC_COMMAND_7="" # Enable power saving feature 7 here NOLM_AC_EXEC_COMMAND_7="" # Disable power saving feature 7 here BATT_EXEC_COMMAND_8="" # Enable power saving feature 8 here LM_AC_EXEC_COMMAND_8="" # Enable power saving feature 8 here NOLM_AC_EXEC_COMMAND_8="" # Disable power saving feature 8 here BATT_EXEC_COMMAND_9="" # Enable power saving feature 9 here LM_AC_EXEC_COMMAND_9="" # Enable power saving feature 9 here NOLM_AC_EXEC_COMMAND_9="" # Disable power saving feature 9 here /etc/laptop-mode/conf.d/intel-hda-powersave.conf changed: DEBUG=0 CONTROL_INTEL_HDA_POWER="auto" BATT_INTEL_HDA_POWERSAVE=1 LM_AC_INTEL_HDA_POWERSAVE=0 NOLM_AC_INTEL_HDA_POWERSAVE=0 INTEL_HDA_DEVICE_TIMEOUT=10 INTEL_HDA_DEVICE_CONTROLLER=1 /etc/laptop-mode/conf.d/video-out.conf changed: DEBUG=0 CONTROL_VIDEO_OUTPUTS=1 BATT_DISABLE_VIDEO_OUTPUTS="VGA1 HDMI1" LM_AC_DISABLE_VIDEO_OUTPUTS="" NOLM_AC_DISABLE_VIDEO_OUTPUTS="" /etc/laptop-mode/laptop-mode.conf changed: ENABLE_LAPTOP_MODE_TOOLS=1 VERBOSE_OUTPUT=1 LOG_TO_SYSLOG=1 DEBUG=0 ENABLE_LAPTOP_MODE_ON_BATTERY=1 ENABLE_LAPTOP_MODE_ON_AC=0 ENABLE_LAPTOP_MODE_WHEN_LID_CLOSED=0 ENABLE_AUTO_MODULES=1 MINIMUM_BATTERY_CHARGE_PERCENT=3 DISABLE_LAPTOP_MODE_ON_CRITICAL_BATTERY_LEVEL=1 HD="/dev/[hs]d[abcdefgh]" PARTITIONS="auto /dev/mapper/*" ASSUME_SCSI_IS_SATA=1 LM_BATT_MAX_LOST_WORK_SECONDS=600 LM_AC_MAX_LOST_WORK_SECONDS=360 CONTROL_READAHEAD=1 LM_READAHEAD=3072 NOLM_READAHEAD=128 CONTROL_NOATIME=0 USE_RELATIME=1 CONTROL_HD_IDLE_TIMEOUT=1 LM_AC_HD_IDLE_TIMEOUT_SECONDS=20 LM_BATT_HD_IDLE_TIMEOUT_SECONDS=20 NOLM_HD_IDLE_TIMEOUT_SECONDS=7200 CONTROL_HD_POWERMGMT="auto" BATT_HD_POWERMGMT=1 LM_AC_HD_POWERMGMT=254 NOLM_AC_HD_POWERMGMT=254 CONTROL_HD_WRITECACHE=0 NOLM_AC_HD_WRITECACHE=1 NOLM_BATT_HD_WRITECACHE=0 LM_HD_WRITECACHE=0 CONTROL_MOUNT_OPTIONS=1 LM_DIRTY_RATIO=60 NOLM_DIRTY_RATIO=40 LM_DIRTY_BACKGROUND_RATIO=1 NOLM_DIRTY_BACKGROUND_RATIO=10 DEF_UPDATE=5 DEF_XFS_AGE_BUFFER=15 DEF_XFS_SYNC_INTERVAL=30 DEF_XFS_BUFD_INTERVAL=1 DEF_MAX_AGE=30 XFS_HZ=100 LM_SECONDS_BEFORE_SYNC=2 -- no debconf information -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
