Package: xserver-xorg-core Version: 2:1.7.7-11 Severity: normal
The PLplot development team have just implemented a demanding 2D fill rendering test for the X stack where we modify our standard example 27 (see http://plplot.sourceforge.net/examples.php?demo=27) to change from drawing the boundary line of "spirographic" (e.g., hypotrochoid and epitrochoid) curves to filling those curves. The boundaries of the 9 test curves are illustrated in the first attachment. The fills of those test curves (implemented using XFillPolygon with a Complex shape and 20000 points in the polygon describing the boundary) have rendering errors. If the fill is done with the EvenOddRule filling rule (set using XSetFillRule) the rendering errors are severe. The first through 3rd test cases show blank results (not illustrated) and the 4th test case (second attachment) and remaining more complex fill cases (not illustrated) show severe rendering errors with many fills missing and some areas filled that should not be. If the fill is done with the WindingRule filling rule, the fill rendering errors are much less severe than in the case of the EvenOddRule filling rule. The first (attached), second (not illustrated) , and 3rd (not illustrated) test cases look fine, but the fourth (attached) and remaining (not illustrated) test cases have minor rendering errors (areas filled which should not be on the right-hand side of the figure so the total result is asymmetric rather than symmetric as it should be for the symmetric hypotrochoid and epitrochoid boundary curves of the fill. Because most applications and libraries (including the PLplot one) have great success with X filling with a small (3 or 4) number of points in the boundary for the normal default EvenOddRule filling rule, I tried the experiment of reducing the number of points from 20000 to 200, but that made no qualitative difference to the severely bad fill rendering for the EvenOddRule filling rule. PLplot has a great many device drivers other than the xwin one used to produce these results. For many of them (for example, Qt-based and pango/cairo-based devices), I tried both the winding number fill rule and the odd-even fill rule, and I got results consistent with those described above where I was using a device that depended on X directly. That result makes sense since these libraries ultimately end up calling X to display these filled results for complex boundaries using either of the two filling rules. So ultimately, all of these different bad fill results for complex boundaries must be caused by fill issues in the X stack. I am not sure which package in the X stack is responsible for filling so please move this bug report to the appropriate package if xserver-xorg-core is not responsible for filling. Also, I am virtually positive this is an upstream issue. I am therefore completely willing to propagate this bug report elsewhere (if the Debian X strike force doesn't want to do that themselves), but I need guidance on which component of the X stack is responsible for filling before I do such propagation. Finally, I am not sure exactly how to attach screenshots to Debian bugs using reportbug so I may have to do that later if it does not work with this initial report. Alan W. Irwin -- Package-specific info: /var/lib/x11/X.roster does not exist. /var/lib/x11/X.md5sum does not exist. X server symlink status: lrwxrwxrwx 1 root root 13 Jul 5 2010 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1889440 Jan 11 19:12 /usr/bin/Xorg /var/lib/x11/xorg.conf.roster does not exist. VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 02) /var/lib/x11/xorg.conf.md5sum does not exist. Xorg X server configuration file status: -rw-r--r-- 1 root root 2941 Jul 7 2010 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "dri2" Load "glx" Load "extmod" Load "dri" Load "record" Load "dbe" EndSection Section "ServerFlags" Option "AutoAddDevices" "False" Option "AutoEnableDevices" "False" # Option "DontZap" "False" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" Option "XkbOptions" "terminate:ctrl_alt_bksp" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "Mouseman" Option "Device" "/dev/ttyS0" Option "Buttons" "3" Option "Emulate3Buttons" "off" # Desperate workaround to turn off wheel part of mouse which makes # middle clicking extremely unreliable. Option "ZAxisMapping" "8 9" EndSection Section "Monitor" Identifier "Monitor0" DisplaySize 410 260 # mm VendorName "ACI" ModelName "ASUS VH198" ### Comment all HorizSync and VertRefresh values to use DDC: #HorizSync 30.0 - 80.0 HorizSync 30.0 - 67.6 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "ColorKey" # <i> #Option "CacheLines" # <i> #Option "Dac6Bit" # [<bool>] #Option "DRI" # [<bool>] #Option "NoDDC" # [<bool>] #Option "ShowCache" # [<bool>] #Option "XvMCSurfaces" # <i> #Option "PageFlip" # [<bool>] Identifier "Card0" Driver "intel" VendorName "Intel Corporation" BoardName "82G33/G31 Express Integrated Graphics Controller" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Kernel version (/proc/version): Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011 Xorg X server log files on system: -rw-r--r-- 1 root root 20237 Jul 12 2010 /var/log/Xorg.1.log -rw-r--r-- 1 root root 23724 Feb 23 20:36 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian Current Operating System: Linux raven 2.6.32-5-amd64 #1 SMP Wed Jan 12 03:40:32 UTC 2011 x86_64 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/raven-squeeze_root ro quiet Build Date: 12 January 2011 02:59:50AM xorg-server 2:1.7.7-11 (Cyril Brulebois <k...@debian.org>) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 22 08:41:18 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "AutoAddDevices" "False" (**) Option "AutoEnableDevices" "False" (**) Not automatically adding devices (**) Not automatically enabling devices (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (**) ModulePath set to "/usr/lib/xorg/modules" (II) Loader magic: 0x7c8a00 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 6.0 X.Org XInput driver : 7.0 X.Org Server Extension : 2.0 (--) using VT number 7 (--) PCI:*(0:0:2:0) 8086:29c2:1043:8276 Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0xfe800000/524288, 0xd0000000/268435456, 0xfe700000/1048576, I/O @ 0x0000cc00/8 (--) PCI: (0:0:2:1) 8086:29c3:1043:8276 Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0xfe880000/524288 (--) PCI: (0:4:0:0) 109e:036e:0070:13eb Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0xfdffe000/4096 (II) Open ACPI successful (/var/run/acpid.socket) (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.7.7, module version = 2.13.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 6.0 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.5.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 7.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge (II) Primary Device is: PCI 00@00:02:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) G33 (--) intel(0): Chipset: "G33" (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (==) intel(0): video overlay key set to 0x101fe (II) intel(0): Output VGA1 using monitor section Monitor0 (II) intel(0): Output VGA2 has no monitor section (II) intel(0): EDID for output VGA1 (II) intel(0): EDID for output VGA2 (II) intel(0): Manufacturer: ACI Model: 19e7 Serial#: 16843009 (II) intel(0): Year: 2009 Week: 46 (II) intel(0): EDID Version: 1.3 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 41 vert.: 26 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: Off; RGB/Color Display (II) intel(0): Default color space is primary color space (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.640 redY: 0.334 greenX: 0.286 greenY: 0.599 (II) intel(0): blueX: 0.154 blueY: 0.077 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 720x400@70Hz (II) intel(0): 640x480@60Hz (II) intel(0): 640x480@72Hz (II) intel(0): 640x480@75Hz (II) intel(0): 800x600@56Hz (II) intel(0): 800x600@60Hz (II) intel(0): 800x600@75Hz (II) intel(0): 1024x768@60Hz (II) intel(0): 1024x768@70Hz (II) intel(0): Manufacturer's mask: 10 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) intel(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129 (II) intel(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281 (II) intel(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) intel(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 106.5 MHz Image Size: 410 x 256 mm (II) intel(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0 (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0 (II) intel(0): Serial No: 9BLMIZ007929 (II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 80 kHz, PixClock max 145 MHz (II) intel(0): Monitor name: ASUS VH198 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff000469e71901010101 (II) intel(0): 2e13010308291a782ee5b5a355499927 (II) intel(0): 135054af4c109500810081c08140714f (II) intel(0): 8180010101019a29a0d0518422305098 (II) intel(0): 36009a001100001c000000ff0039424c (II) intel(0): 4d495a3030373932390a000000fd0037 (II) intel(0): 4b1e500e000a202020202020000000fc (II) intel(0): 00415355532056483139380a20200044 (II) intel(0): Printing probed modes for output VGA2 (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz) (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Output VGA1 disconnected (II) intel(0): Output VGA2 connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output VGA2 using initial mode 1440x900 (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. (II) intel(0): Kernel page flipping support detected, enabling (**) intel(0): Display dimensions: (410, 260) mm (**) intel(0): DPI set to (89, 87) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.7.7, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (==) Depth 24 pixmap format is 32 bpp (==) intel(0): VideoRam: 262144 KB (II) intel(0): [DRI2] Setup complete (II) intel(0): Allocated new frame buffer 1472x900 stride 8192, tiled (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (II) put_image (II) get_image (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (**) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: DRI2 Enabled (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI2 GL provider for screen 0 (II) intel(0): Setting screen physical size to 381 x 238 (**) Option "Protocol" "Mouseman" (**) Mouse0: Device: "/dev/ttyS0" (**) Mouse0: Protocol: "Mouseman" (**) Option "CorePointer" (**) Mouse0: always reports core events (**) Option "Device" "/dev/ttyS0" (**) Option "BaudRate" "1200" (**) Option "StopBits" "1" (**) Option "DataBits" "7" (**) Option "Parity" "None" (**) Option "Vmin" "1" (**) Option "Vtime" "0" (**) Option "FlowControl" "None" (**) Option "Buttons" "3" (**) Option "Emulate3Buttons" "off" (**) Option "ZAxisMapping" "8 9" (**) Mouse0: ZAxisMapping: buttons 8 and 9 (**) Mouse0: Buttons: 13 (**) Mouse0: Sensitivity: 1 (**) Mouse0: BaudRate: 1200 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Mouse0: (accel) keeping acceleration scheme 1 (**) Mouse0: (accel) acceleration profile 0 (**) Mouse0: (accel) acceleration factor: 2.000 (**) Mouse0: (accel) acceleration threshold: 4 , 0x6e, 0x58, 0x6e(**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "XkbOptions" "terminate:ctrl_alt_bksp" (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (II) config/udev: Adding input device Power Button (/dev/input/event4) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device Power Button (/dev/input/event3) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device PC Speaker (/dev/input/event2) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0) (II) AutoAddDevices is off - not adding device. (II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0) (II) AutoAddDevices is off - not adding device. (II) intel(0): EDID vendor "ACI", prod id 6631 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): EDID vendor "ACI", prod id 6631 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): EDID vendor "ACI", prod id 6631 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): EDID vendor "ACI", prod id 6631 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) udev information: P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4 N: input/event4 S: char/13:68 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4 E: MAJOR=13 E: MINOR=68 E: DEVNAME=/dev/input/event4 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:68 E: DMI_VENDOR=System manufacturer P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3 N: input/event3 S: char/13:67 E: UDEV_LOG=3 E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3 E: MAJOR=13 E: MINOR=67 E: DEVNAME=/dev/input/event3 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:67 E: DMI_VENDOR=System manufacturer P: /devices/pci0000:00/0000:00:1b.0/input/input5/event5 N: input/event5 S: char/13:69 E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input5/event5 E: MAJOR=13 E: MINOR=69 E: DEVNAME=/dev/input/event5 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_PATH=pci-0000:00:1b.0 E: DMI_VENDOR=System manufacturer E: DEVLINKS=/dev/char/13:69 P: /devices/platform/i8042/serio0/input/input1/event1 N: input/event1 S: char/13:65 S: input/by-path/platform-i8042-serio-0-event-kbd E: UDEV_LOG=3 E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1 E: MAJOR=13 E: MINOR=65 E: DEVNAME=/dev/input/event1 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_KEY=1 E: ID_INPUT_KEYBOARD=1 E: ID_SERIAL=noserial E: ID_PATH=platform-i8042-serio-0 E: XKBMODEL=pc104 E: XKBLAYOUT=us E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd E: DMI_VENDOR=System manufacturer P: /devices/platform/pcspkr/input/input2/event2 N: input/event2 S: char/13:66 S: input/by-path/platform-pcspkr-event-spkr E: UDEV_LOG=3 E: DEVPATH=/devices/platform/pcspkr/input/input2/event2 E: MAJOR=13 E: MINOR=66 E: DEVNAME=/dev/input/event2 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_SERIAL=noserial E: ID_PATH=platform-pcspkr E: DMI_VENDOR=System manufacturer E: DEVLINKS=/dev/char/13:66 /dev/input/by-path/platform-pcspkr-event-spkr P: /devices/virtual/input/input0/event0 N: input/event0 S: char/13:64 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input0/event0 E: MAJOR=13 E: MINOR=64 E: DEVNAME=/dev/input/event0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: DMI_VENDOR=System manufacturer E: DEVLINKS=/dev/char/13:64 P: /devices/virtual/input/input0/mouse0 N: input/mouse0 S: char/13:32 E: UDEV_LOG=3 E: DEVPATH=/devices/virtual/input/input0/mouse0 E: MAJOR=13 E: MINOR=32 E: DEVNAME=/dev/input/mouse0 E: SUBSYSTEM=input E: ID_INPUT=1 E: ID_INPUT_MOUSE=1 E: ID_SERIAL=noserial E: DEVLINKS=/dev/char/13:32 DRM Information from dmesg: -- System Information: Debian Release: 6.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores) Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages xserver-xorg-core depends on: ii keyboard-configuration 1.68 system-wide keyboard preferences ii libaudit0 1.7.13-1+b2 Dynamic library for security audit ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib ii libdrm2 2.4.21-1~squeeze3 Userspace interface to kernel DRM ii libgcrypt11 1.4.5-2 LGPL Crypto library - runtime libr ii libpciaccess0 0.12.0-1 Generic PCI access library for X ii libpixman-1-0 0.16.4-1 pixel-manipulation library for X a ii libselinux1 2.0.96-1 SELinux runtime shared libraries ii libudev0 164-3 libudev shared library ii libxau6 1:1.0.6-1 X11 authorisation library ii libxdmcp6 1:1.0.3-2 X11 Display Manager Control Protoc ii libxfont1 1:1.4.1-2 X11 font rasterisation library ii udev 164-3 /dev/ and hotplug management daemo ii xserver-common 2:1.7.7-11 common files used by various X ser ii xserver-xorg 1:7.5+8 the X.Org X server Versions of packages xserver-xorg-core recommends: ii libgl1-mesa-dri 7.7.1-4 A free implementation of the OpenG Versions of packages xserver-xorg-core suggests: ii xfonts-100dpi 1:1.0.1 100 dpi fonts for X pn xfonts-scalable <none> (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
