Package: installation-reports Debian-installer-version: /daily/i386/20050828/debian-testing-i386-netinst.iso 2005/08/29 uname -a: Linux dev-case-morphix 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005 i686 GNU/Linux Date: 2005/08/29 - 1800 GMT approx. Method: Netinst.iso then ftp.uk.debian.org Machine: Mini-itx Motherboard Processor: VIA Samuel 2 - CentaurHauls Memory: 512Mb Root Device: IDE hdc Root Size/partition table: outout of /proc/partitons:- major minor #blocks name
22 0 9820440 hdc 22 1 2755116 hdc1 22 2 1 hdc2 22 5 345366 hdc5 22 6 6715138 hdc6 /dev/hdc1 / ext3 rw,errors=remount-ro 0 0 proc /proc proc rw 0 0 sysfs /sys sysfs rw 0 0 devpts /dev/pts devpts rw,gid=5,mode=620 0 0 tmpfs /dev/shm tmpfs rw 0 0 /dev/hdc6 /home ext3 rw 0 0 usbfs /proc/bus/usb usbfs rw 0 0 tmpfs /dev tmpfs rw,size=10M,mode=0755 0 0 Output of lspci Linux dev-case-morphix 2.6.8-2-386 #1 Thu May 19 17:40:50 JST 2005 i686 GNU/Linux dev-case-morphix:/home/bms# lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266] 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 0000:00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo CLE266] integrated CastleRock graphics (rev 03) and lspci -n: dev-case-morphix:/home/bms# lspci -n 0000:00:00.0 0600: 1106:3123 0000:00:01.0 0604: 1106:b091 0000:00:0d.0 0c00: 1106:3044 (rev 80) 0000:00:10.0 0c03: 1106:3038 (rev 80) 0000:00:10.1 0c03: 1106:3038 (rev 80) 0000:00:10.2 0c03: 1106:3038 (rev 80) 0000:00:10.3 0c03: 1106:3104 (rev 82) 0000:00:11.0 0601: 1106:3177 0000:00:11.1 0101: 1106:0571 (rev 06) 0000:00:11.5 0401: 1106:3059 (rev 50) 0000:00:12.0 0200: 1106:3065 (rev 74) 0000:01:00.0 0300: 1106:3122 (rev 03) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [0] Install base system: [0] Install boot loader: [0] Reboot: [O] Comments/Problems: After boot up base system I had to exit to shell and run the command dhclient eth0 eth0 is the on-board ethernet. Connected to LAN with dhcp running, with gateway to interweb. Then resume installation at apt-configuration point. Apart from that very nice install. I still hae to run dhclient after boot-up. Thanks, Brendan M. Sleight - p.s. real email [EMAIL PROTECTED] - remove example. to give at barwap.com
