2010/8/28 Felix Geyer <debfx-...@fobos.de>: > On 08/28/2010 08:29 PM, Ludovic Rousseau wrote: >> $ sudo /etc/init.d/virtualbox-ose-guest-utils start >> Starting VirtualBox Additions: error: VbglR3Init failed with >> rc=VERR_FILE_NOT_FOUND. >> failed! >> >> >> I can also reproduce the error message using: >> $ VBoxService >> : error: VbglR3Init failed with rc=VERR_FILE_NOT_FOUND. > Why did you remove the virtualbox-ose-guest-dkms package?
I don't think I removed virtualbox-ose-guest-dkms package. I see that virtualbox-ose-guest-utils has a Recommends: on it. > Is the vboxdrv kernel module loaded? Having now installed virtualbox-ose-guest-dkms I do not have vboxdrv but vboxguest instead. $ sudo modprobe vboxguest $ sudo /etc/init.d/virtualbox-ose-guest-utils start Starting VirtualBox AdditionsVBoxService: 3.2.8_OSE r64453 started. Verbose level = 0 . It looks like the problem is fixed once vboxguest is loaded. >> I am using Debian as a guest system in VirtualBox 3.2.8 r64453 on Mac OS >> X. >> >> I also note that I can't use a USB device (a CCID smart card reader) >> inside the guest Debian. >> lsusb is blocked in a system call and returns only when I unplug the USB >> device. >> > VirtualBox OSE doesn't support passing through USB devices to the guest OS. I do not use VirtualBox OSE on Mac OS X but the "full" version of VirtualBox. Debian is run _inside_ the virtual machine. But I still can't use my USB device. > If you want USB support, you need to remove all virtualbox-ose-guest-* > packages > and install the guest additions from the iso image: > http://www.virtualbox.org/manual/ch04.html#id2658274 I removed all the virtualbox-* packages and rebooted. I now have a resolution of 800x600 only. And still not USB. When I connect the USB device and attach it to the guest the guest the guest kernel logs: [ 84.476306] usb 2-1: new full speed USB device using ohci_hcd and address 2 and then 5 seconds later: [ 99.642034] usb 2-1: device descriptor read/64, error -110 The device is not visible in the USB tree. Only the two USB hubs. ~$ find /dev/bus/usb/ /dev/bus/usb/ /dev/bus/usb/002 /dev/bus/usb/002/001 /dev/bus/usb/001 /dev/bus/usb/001/001 And lsusb is blocked in a iotcl(): [...) munmap(0x7fabc5cd0000, 4096) = 0 open("/dev/bus/usb", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3 fcntl(3, F_GETFD) = 0x1 (flags FD_CLOEXEC) getdents(3, /* 4 entries */, 32768) = 96 close(3) = 0 open("/dev/bus/usb", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3 getdents(3, /* 4 entries */, 32768) = 96 getdents(3, /* 0 entries */, 32768) = 0 close(3) = 0 open("/dev/bus/usb/002", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3 getdents(3, /* 3 entries */, 32768) = 72 open("/dev/bus/usb/002/001", O_RDWR) = 4 ioctl(4, USBDEVFS_CONNECTINFO The ioctl() finishes after 1 minute (or so) with no error but the USB device is still not visible. [...] ioctl(4, USBDEVFS_CONNECTINFO, 0x7fff576ca430) = 0 read(4, "\22\1\0\2\t\...@k\35\2\0\6\2\3\2\1\1", 18) = 18 read(4, "\t\2\31\0\1\1\0\340", 8) = 8 read(4, "\0\t\4\0\0\1\t\0\0\0\7\5\201\3\4\0\f", 17) = 17 close(4) = 0 getdents(3, /* 0 entries */, 32768) = 0 close(3) = 0 open("/dev/bus/usb/001/001", O_RDWR) = 3 ioctl(3, USBDEVFS_IOCTL or USBDEVFS_IOCTL32, 0x7fff576ca430) = 9 close(3) = 0 fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 0), ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fabc5cd0000 write(1, "Bus 002 Device 001: ID 1d6b:0001"..., 63Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub ) = 63 write(1, "Bus 001 Device 001: ID 1d6b:0002"..., 63Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ) = 63 exit_group(0) = ? I guess the problem is with the Linux kernel and not with virtualbox components. So you can close this bug unless you know what could be the problem. Thanks a lot for your time -- Dr. Ludovic Rousseau -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
