Package: dahdi-source
Version: 1:2.3.0.1+dfsg-1
Severity: important
Tags: upstream
System becomes unreponsive, even to serial break sysrq (oops captured via
serial console). This occurs after only a few minutes of call time.
[ 9695.212106] BUG: unable to handle kernel NULL pointer dereference at 000001f0
[ 9695.216018] IP: [<c1001eaf>] __switch_to+0x50/0x129
[ 9695.216018] *pde = 00000000
[ 9695.216018] Oops: 0002 [#1]
[ 9695.216018] last sysfs file:
/sys/devices/pci0000:00/0000:00:10.2/usb4/4-2/idProduct
[ 9695.216018] Modules linked in: dahdi_echocan_oslec echo loop snd_via82xx
gameport snd_ac97_codec ac97_bus snd_pcm snd_page_alloc]
[ 9695.216018]
[ 9695.216018] Pid: 14267, comm: tail Not tainted (2.6.32-5-486 #1)
[ 9695.216018] EIP: 0060:[<c1001eaf>] EFLAGS: 00010046 CPU: 0
[ 9695.216018] EIP is at __switch_to+0x50/0x129
[ 9695.216018] EAX: 00000001 EBX: ce835040 ECX: 57ab6cfd EDX: ce835040
[ 9695.216018] ESI: cd15e8a0 EDI: 00000000 EBP: 00000000 ESP: ce847f28
[ 9695.216018] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 9695.216018] Process tail (pid: 14267, ti=ce846000 task=cd15e8a0
task.ti=cd24e000)
[ 9695.216018] Stack:
[ 9695.216018] c101cf62 c08ea080 c08ea0ac 725916f1 00000000 cd16e540 cd15e8a0
c1242f26
[ 9695.216018] <0> ce835040 00000046 cb023800 c1350604 ce8351fc 576e589e
000008d1 c135ae30
[ 9695.216018] <0> 00000246 cd0c281c 00000286 cd4af4b8 cb0238a4 ce80a0e0
ce847fb4 ce80a0e0
[ 9695.216018] Call Trace:
[ 9695.216018] [<c101cf62>] ? set_next_entity+0x29/0x51
[ 9695.216018] [<c1242f26>] ? schedule+0x395/0x3d5
[ 9695.216018] [<c1030d4a>] ? worker_thread+0x90/0x1a4
[ 9695.216018] [<c116e0a5>] ? flush_to_ldisc+0x0/0x161
[ 9695.216018] [<c1033570>] ? autoremove_wake_function+0x0/0x2d
[ 9695.216018] [<c1030cba>] ? worker_thread+0x0/0x1a4
[ 9695.216018] [<c10331c8>] ? kthread+0x60/0x65
[ 9695.216018] [<c1033168>] ? kthread+0x0/0x65
[ 9695.216018] [<c1003997>] ? kernel_thread_helper+0x7/0x10
[ 9695.216018] Code: 40 0c a8 01 74 56 a8 10 8b be 8c 02 00 00 74 1b 83 c8 ff
89 c2 0f ae 27 f6 87 00 02 00 00 01 74 23 80 7f 02 00
[ 9695.216018] EIP: [<c1001eaf>] __switch_to+0x50/0x129 SS:ESP 0068:ce847f28
[ 9695.216018] CR2: 00000000000001f0
[ 9695.216018] ---[ end trace 090adb1746d9327c ]---
[ 9695.452635] BUG: unable to handle kernel NULL pointer dereference at 000001f0
[ 9695.456014] IP: [<c1003b13>] __math_state_restore+0x30/0x67
[ 9695.456014] *pde = 00000000
[ 9695.456014] Oops: 0000 [#2]
[ 9695.456014] last sysfs file:
/sys/devices/pci0000:00/0000:00:10.2/usb4/4-2/idProduct
[ 9695.456014] Modules linked in: dahdi_echocan_oslec echo loop snd_via82xx
gameport snd_ac97_codec ac97_bus snd_pcm snd_page_alloc]
[ 9695.456014]
[ 9695.456014] Pid: 14267, comm: tail Tainted: G D (2.6.32-5-486 #1)
[ 9695.456014] EIP: 0060:[<c1003b13>] EFLAGS: 00010046 CPU: 0
[ 9695.456014] EIP is at __math_state_restore+0x30/0x67
[ 9695.456014] EAX: cd24e000 EBX: cd24e000 ECX: cd15e8a0 EDX: ffffffff
[ 9695.456014] ESI: cd15e8a0 EDI: 00000000 EBP: cd266300 ESP: cd24fdfc
[ 9695.456014] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
[ 9695.456014] Process tail (pid: 14267, ti=cd24e000 task=cd15e8a0
task.ti=cd24e000)
[ 9695.456014] Stack:
[ 9695.456014] 00000000 c135f658 cd24fe28 00000007 c1244103 cd266300 c1244140
00000246
[ 9695.456014] <0> 00000000 cd266360 c1243dfb cd266360 00000080 cd266f00
00000007 00000008
[ 9695.456014] <0> cd266300 cd32860e 0000007b 0000007b 00000000 000000e0
ffffffff cfeda029
[ 9695.456014] Call Trace:
[ 9695.456014] [<c124299e>] ? panic+0x38/0xde
[ 9695.456014] [<c12446ec>] ? oops_end+0x81/0x8d
[ 9695.456014] [<c1014d1c>] ? no_context+0x104/0x10d
[ 9695.456014] [<c1014e6c>] ? __bad_area_nosemaphore+0x147/0x152
[ 9695.456014] [<c1245521>] ? do_page_fault+0x0/0x26a
[ 9695.456014] [<c1014e81>] ? bad_area_nosemaphore+0xa/0xc
[ 9695.456014] [<c1243dfb>] ? error_code+0x6b/0x70
[ 9695.456014] [<c1003b13>] ? __math_state_restore+0x30/0x67
[ 9695.456014] [<c1244103>] ? do_device_not_available+0x0/0x4d
[ 9695.456014] [<c1244140>] ? do_device_not_available+0x3d/0x4d
[ 9695.456014] [<c1243dfb>] ? error_code+0x6b/0x70
[ 9695.456014] [<cfeda029>] ? fir16+0x29/0x7c [echo]
[ 9695.456014] [<cfeda1de>] ? oslec_update+0x10a/0x3a8 [echo]
[ 9695.456014] [<cfee4025>] ? echo_can_process+0x1f/0x2f [dahdi_echocan_oslec]
[ 9695.456014] [<cfb98520>] ? __dahdi_ec_chunk+0x18d/0x2d7 [dahdi]
[ 9695.456014] [<cfc1b91f>] ? wctdm_interrupt+0xb32/0xc0b [wctdm]
[ 9695.456014] [<c107d8fa>] ? __do_fault+0x30c/0x33c
[ 9695.456014] [<c1058b02>] ? handle_IRQ_event+0x4e/0x100
[ 9695.456014] [<c1059d6d>] ? handle_fasteoi_irq+0x4f/0x75
[ 9695.456014] [<c1004507>] ? handle_irq+0x17/0x1c
[ 9695.456014] [<c10041d6>] ? do_IRQ+0x2b/0x76
[ 9695.456014] [<c1003790>] ? common_interrupt+0x30/0x40
[ 9695.456014] [<c124560f>] ? do_page_fault+0xee/0x26a
[ 9695.456014] [<c1245521>] ? do_page_fault+0x0/0x26a
[ 9695.456014] [<c1243dfb>] ? error_code+0x6b/0x70
processor : 0
vendor_id : CentaurHauls
cpu family : 6
model : 13
model name : VIA C7 Processor 1000MHz
stepping : 0
cpu MHz : 997.534
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge cmov pat
clflush acpi mmx fxsr sse sse2 tm nx pni est tm2 xtpr rng rng_en ace ace_en
ace2 ace2_en phe phe_en pmm pmm_en
bogomips : 1995.06
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 32 bits virtual
power management:
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: f4000000-f7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR+ <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller
(rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at fc00 [size=8]
Region 1: I/O ports at f800 [size=4]
Region 2: I/O ports at f400 [size=8]
Region 3: I/O ports at f000 [size=4]
Region 4: I/O ports at ec00 [size=16]
Region 5: I/O ports at e800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_via
00:0f.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at e400 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 81) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20
[EHCI])
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
[KT600/K8T800/K8T890 South]
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
AC97 Audio Controller (rev 60)
Subsystem: VIA Technologies, Inc. Device aa08
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at d000 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet
Controller on VT8235
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at c800 [size=256]
Region 1: Memory at fdffe000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: via-rhine
00:14.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Device b100:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c400 [size=256]
Region 1: Memory at fdffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: wctdm
01:00.0 VGA compatible controller: VIA Technologies, Inc. CN700/P4M800
Pro/P4M800 CE/VN800 [S3 UniChrome Pro] (rev 01) (prog-if 00 [VGA controller])
Subsystem: VIA Technologies, Inc. CN700/P4M800 Pro/P4M800 CE/VN800 [S3
UniChrome Pro]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at fc000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] AGP version 3.0
Status: RQ=256 Iso- ArqSz=0 Cal=7 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3+ Rate=x4,x8
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW-
Rate=<none>
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-486 (Debian 2.6.32-19)
(b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 Fri Aug 6
00:34:39 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000eee0000 (usable)
[ 0.000000] BIOS-e820: 000000000eee0000 - 000000000eee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000eee3000 - 000000000eef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000eef0000 - 000000000ef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around
it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] last_pfn = 0xeee0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-F7FFF write-through
[ 0.000000] F8000-F8FFF uncachable
[ 0.000000] F9000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 00F000000 mask FFF000000 uncachable
[ 0.000000] 2 base 0E8000000 mask FF8000000 write-combining
[ 0.000000] 3 base 00EF00000 mask FFFF00000 write-through
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000eee0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000ec00000 page 2M
[ 0.000000] 000ec00000 - 000eee0000 page 4k
[ 0.000000] kernel direct mapping tables up to eee0000 @ 10000-15000
[ 0.000000] RAMDISK: 0ab59000 - 0b36741b
[ 0.000000] ACPI: RSDP 000f7a70 00014 (v00 P4M80P)
[ 0.000000] ACPI: RSDT 0eee3040 0002C (v01 P4M80P AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: FACP 0eee30c0 00074 (v01 P4M80P AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: DSDT 0eee3180 04E40 (v01 P4M80P AWRDACPI 00001000 MSFT
0100000E)
[ 0.000000] ACPI: FACS 0eee0000 00040
[ 0.000000] ACPI: APIC 0eee8000 0005A (v01 P4M80P AWRDACPI 42302E31 AWRD
00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 238MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0eee0000
[ 0.000000] low ram: 0 - 0eee0000
[ 0.000000] node 0 low ram: 00000000 - 0eee0000
[ 0.000000] node 0 bootmap 00011000 - 00012ddc
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 000eee0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0001000000 - 000144ea08] TEXT DATA BSS ==> [0001000000
- 000144ea08]
[ 0.000000] #2 [000ab59000 - 000b36741b] RAMDISK ==> [000ab59000
- 000b36741b]
[ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800
- 0000100000]
[ 0.000000] #4 [000144f000 - 000145506e] BRK ==> [000144f000
- 000145506e]
[ 0.000000] #5 [0000010000 - 0000011000] PGTABLE ==> [0000010000
- 0000011000]
[ 0.000000] #6 [0000011000 - 0000013000] BOOTMAP ==> [0000011000
- 0000013000]
[ 0.000000] found SMP MP-table at [c00f38f0] f38f0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000eee0
[ 0.000000] HighMem 0x0000eee0 -> 0x0000eee0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000eee0
[ 0.000000] On node 0 totalpages: 61039
[ 0.000000] free_area_init_node: node 0, pgdat c135ea54, node_mem_map
c1457200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 446 pages used for memmap
[ 0.000000] Normal zone: 56610 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at ef00000 (gap:
ef00000:efd00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 60561
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-486
root=UUID=d5ab0320-6abe-489e-acea-bec9e1992279 ro console=ttyS0,115200 quiet
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 228964k/244608k available (2333k kernel code, 14836k
reserved, 1145k data, 436k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xcf6e0000 - 0xff7fe000 ( 769 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xceee0000 ( 238 MB)
[ 0.000000] .init : 0xc1366000 - 0xc13d3000 ( 436 kB)
[ 0.000000] .data : 0xc124744b - 0xc1365a80 (1145 kB)
[ 0.000000] .text : 0xc1000000 - 0xc124744b (2333 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:288
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 997.534 MHz processor.
[ 0.008008] Calibrating delay loop (skipped), value calculated using timer
frequency.. 1995.06 BogoMIPS (lpj=3990136)
[ 0.008047] Security Framework initialized
[ 0.008061] SELinux: Disabled at boot.
[ 0.008077] Mount-cache hash table entries: 512
[ 0.008296] Initializing cgroup subsys ns
[ 0.008306] Initializing cgroup subsys cpuacct
[ 0.008313] Initializing cgroup subsys devices
[ 0.008320] Initializing cgroup subsys freezer
[ 0.008328] Initializing cgroup subsys net_cls
[ 0.008368] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008377] CPU: L2 Cache: 128K (64 bytes/line)
[ 0.008399] CPU: Centaur VIA C7 Processor 1000MHz stepping 00
[ 0.008415] Checking 'hlt' instruction... OK.
[ 0.027467] ACPI: Core revision 20090903
[ 0.044381] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.045553] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088001] devtmpfs: initialized
[ 0.088001] regulator: core version 0.5
[ 0.088001] NET: Registered protocol family 16
[ 0.088001] EISA bus registered
[ 0.088001] ACPI: bus type pci registered
[ 0.093793] PCI: PCI BIOS revision 2.10 entry at 0xf9490, last bus=1
[ 0.093801] PCI: Using configuration type 1 for base access
[ 0.094830] bio: create slab <bio-0> at 0
[ 0.096210] ACPI: EC: Look up EC in DSDT
[ 0.112786] ACPI: Interpreter enabled
[ 0.112798] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.112875] ACPI: Using IOAPIC for interrupt routing
[ 0.129016] ACPI: No dock devices found.
[ 0.129294] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.129402] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.129824] pci 0000:00:01.0: supports D1
[ 0.129901] pci 0000:00:0f.0: reg 10 io port: [0xfc00-0xfc07]
[ 0.129917] pci 0000:00:0f.0: reg 14 io port: [0xf800-0xf803]
[ 0.129934] pci 0000:00:0f.0: reg 18 io port: [0xf400-0xf407]
[ 0.129950] pci 0000:00:0f.0: reg 1c io port: [0xf000-0xf003]
[ 0.129966] pci 0000:00:0f.0: reg 20 io port: [0xec00-0xec0f]
[ 0.129981] pci 0000:00:0f.0: reg 24 io port: [0xe800-0xe8ff]
[ 0.130084] pci 0000:00:0f.1: reg 20 io port: [0xe400-0xe40f]
[ 0.130200] pci 0000:00:10.0: reg 20 io port: [0xe000-0xe01f]
[ 0.130239] pci 0000:00:10.0: supports D1 D2
[ 0.130249] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130261] pci 0000:00:10.0: PME# disabled
[ 0.130333] pci 0000:00:10.1: reg 20 io port: [0xdc00-0xdc1f]
[ 0.130372] pci 0000:00:10.1: supports D1 D2
[ 0.130381] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130392] pci 0000:00:10.1: PME# disabled
[ 0.130463] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f]
[ 0.130503] pci 0000:00:10.2: supports D1 D2
[ 0.130512] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130523] pci 0000:00:10.2: PME# disabled
[ 0.130594] pci 0000:00:10.3: reg 20 io port: [0xd400-0xd41f]
[ 0.130633] pci 0000:00:10.3: supports D1 D2
[ 0.130642] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130653] pci 0000:00:10.3: PME# disabled
[ 0.130704] pci 0000:00:10.4: reg 10 32bit mmio: [0xfdfff000-0xfdfff0ff]
[ 0.130765] pci 0000:00:10.4: supports D1 D2
[ 0.130774] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.130785] pci 0000:00:10.4: PME# disabled
[ 0.130874] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.130958] pci 0000:00:11.5: reg 10 io port: [0xd000-0xd0ff]
[ 0.131021] pci 0000:00:11.5: supports D1 D2
[ 0.131075] pci 0000:00:12.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.131092] pci 0000:00:12.0: reg 14 32bit mmio: [0xfdffe000-0xfdffe0ff]
[ 0.131149] pci 0000:00:12.0: supports D1 D2
[ 0.131157] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131169] pci 0000:00:12.0: PME# disabled
[ 0.131221] pci 0000:00:14.0: reg 10 io port: [0xc400-0xc4ff]
[ 0.131238] pci 0000:00:14.0: reg 14 32bit mmio: [0xfdffd000-0xfdffdfff]
[ 0.131294] pci 0000:00:14.0: supports D2
[ 0.131303] pci 0000:00:14.0: PME# supported from D0 D2 D3hot D3cold
[ 0.131314] pci 0000:00:14.0: PME# disabled
[ 0.131395] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf4000000-0xf7ffffff]
[ 0.131411] pci 0000:01:00.0: reg 14 32bit mmio: [0xfb000000-0xfbffffff]
[ 0.131444] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.131474] pci 0000:01:00.0: supports D1 D2
[ 0.131535] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
[ 0.131548] pci 0000:00:01.0: bridge 32bit mmio: [0xfb000000-0xfcffffff]
[ 0.131561] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf4000000-0xf7ffffff]
[ 0.131580] pci_bus 0000:00: on NUMA node 0
[ 0.131595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.256790] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 0.257260] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 0.257736] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[ 0.258156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 0.258565] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 0.258953] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 0.259340] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 0.259728] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0,
disabled.
[ 0.260254] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 0.260740] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 0.261216] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 0.261787] ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
[ 0.262065] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.262074] vgaarb: loaded
[ 0.262257] PCI: Using ACPI for IRQ routing
[ 0.262641] Switching to clocksource tsc
[ 0.264001] pnp: PnP ACPI init
[ 0.264001] ACPI: bus type pnp registered
[ 0.271629] pnp: PnP ACPI: found 10 devices
[ 0.271639] ACPI: ACPI bus type pnp unregistered
[ 0.271650] PnPBIOS: Disabled by ACPI PNP
[ 0.271682] system 00:00: iomem range 0xcfc00-0xcffff has been reserved
[ 0.271694] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.271707] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.271719] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.271732] system 00:00: iomem range 0xeee0000-0xeefffff could not be
reserved
[ 0.271746] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.271758] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.271771] system 00:00: iomem range 0x100000-0xeedffff could not be
reserved
[ 0.271784] system 00:00: iomem range 0xfec00000-0xfec00fff could not be
reserved
[ 0.271797] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.271810] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.271832] system 00:02: ioport range 0x400-0x47f has been reserved
[ 0.271844] system 00:02: ioport range 0x500-0x50f has been reserved
[ 0.271864] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.271876] system 00:03: ioport range 0x800-0x87f has been reserved
[ 0.271888] system 00:03: ioport range 0x880-0x8ff has been reserved
[ 0.306966] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.306978] pci 0000:00:01.0: IO window: 0xb000-0xbfff
[ 0.306992] pci 0000:00:01.0: MEM window: 0xfb000000-0xfcffffff
[ 0.307006] pci 0000:00:01.0: PREFETCH window: 0xf4000000-0xf7ffffff
[ 0.307036] pci 0000:00:01.0: setting latency timer to 64
[ 0.307052] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.307063] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.307074] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.307085] pci_bus 0000:01: resource 1 mem: [0xfb000000-0xfcffffff]
[ 0.307096] pci_bus 0000:01: resource 2 pref mem [0xf4000000-0xf7ffffff]
[ 0.307194] NET: Registered protocol family 2
[ 0.307449] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.308248] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.308416] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.308518] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.308527] TCP reno registered
[ 0.308674] NET: Registered protocol family 1
[ 0.308743] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.308870] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.308899] pci 0000:01:00.0: Boot video device
[ 0.309028] Unpacking initramfs...
[ 1.132836] Freeing initrd memory: 8249k freed
[ 1.148361] audit: initializing netlink socket (disabled)
[ 1.148392] type=2000 audit(1282092911.148:1): initialized
[ 1.159754] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.164391] VFS: Disk quotas dquot_6.5.2
[ 1.164565] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.164749] msgmni has been set to 464
[ 1.165230] alg: No test for stdrng (krng)
[ 1.165393] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
253)
[ 1.165404] io scheduler noop registered
[ 1.165411] io scheduler anticipatory registered
[ 1.165419] io scheduler deadline registered
[ 1.165535] io scheduler cfq registered (default)
[ 1.165987] isapnp: Scanning for PnP cards...
[ 1.520145] isapnp: No Plug & Play device found
[ 1.523755] Linux agpgart interface v0.103
[ 1.524131] agpgart: Detected VIA VT3314 chipset
[ 1.534611] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 1.534701] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.534877] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.535581] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.535935] PNP: No PS/2 controller found. Probing ports directly.
[ 1.788120] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.788333] mice: PS/2 mouse device common for all mice
[ 1.788433] rtc_cmos 00:05: RTC can wake from S4
[ 1.788542] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.788592] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.788687] EISA: Probing bus 0 at eisa.0
[ 1.788751] EISA: Detected 0 cards.
[ 1.788760] cpuidle: using governor ladder
[ 1.788768] cpuidle: using governor menu
[ 1.788781] No iBFT detected.
[ 1.790165] TCP cubic registered
[ 1.790594] NET: Registered protocol family 10
[ 1.791952] lo: Disabled Privacy Extensions
[ 1.793019] Mobile IPv6
[ 1.793028] NET: Registered protocol family 17
[ 1.793049] Using IPI Shortcut mode
[ 1.793290] PM: Resume from disk failed.
[ 1.793321] registered taskstats version 1
[ 1.793985] rtc_cmos 00:05: setting system clock to 2010-08-18 00:55:11 UTC
(1282092911)
[ 1.794083] Initalizing network drop monitor service
[ 1.794156] Freeing unused kernel memory: 436k freed
[ 1.795110] Write protecting the kernel text: 2336k
[ 1.795185] Write protecting the kernel read-only data: 892k
[ 1.852335] udev: starting version 160
[ 2.427059] SCSI subsystem initialized
[ 2.550989] usbcore: registered new interface driver usbfs
[ 2.551386] usbcore: registered new interface driver hub
[ 2.551810] usbcore: registered new device driver usb
[ 2.560271] libata version 3.00 loaded.
[ 2.581505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.582247] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 2.582273] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level,
low) -> IRQ 21
[ 2.582325] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.582387] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus
number 1
[ 2.582496] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdfff000
[ 2.592608] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.592712] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.592723] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.592733] usb usb1: Product: EHCI Host Controller
[ 2.592742] usb usb1: Manufacturer: Linux 2.6.32-5-486 ehci_hcd
[ 2.592751] usb usb1: SerialNumber: 0000:00:10.4
[ 2.593030] usb usb1: configuration #1 chosen from 1 choice
[ 2.593123] hub 1-0:1.0: USB hub found
[ 2.593150] hub 1-0:1.0: 8 ports detected
[ 2.594066] sata_via 0000:00:0f.0: version 2.4
[ 2.594749] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 2.594773] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level,
low) -> IRQ 20
[ 2.594869] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 2.595040] scsi0 : sata_via
[ 2.595578] scsi1 : sata_via
[ 2.599975] ata1: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 20
[ 2.599989] ata2: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 20
[ 2.611924] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.611943] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 2.612747] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 2.612772] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23
(level, low) -> IRQ 23
[ 2.626310] eth0: VIA Rhine II at 0x1c800, 00:1f:f2:00:47:c9, IRQ 23.
[ 2.627037] eth0: MII PHY found at address 1, status 0x786d advertising 05e1
Link c5e1.
[ 2.635805] pata_via 0000:00:0f.1: version 0.3.4
[ 2.635855] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level,
low) -> IRQ 20
[ 2.637181] scsi2 : pata_via
[ 2.637603] scsi3 : pata_via
[ 2.641821] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 2.641834] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 2.649213] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.649393] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level,
low) -> IRQ 21
[ 2.649420] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.649475] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 2
[ 2.649525] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
[ 2.649642] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.649653] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.649663] usb usb2: Product: UHCI Host Controller
[ 2.649672] usb usb2: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[ 2.649681] usb usb2: SerialNumber: 0000:00:10.0
[ 2.650401] usb usb2: configuration #1 chosen from 1 choice
[ 2.650631] hub 2-0:1.0: USB hub found
[ 2.650661] hub 2-0:1.0: 2 ports detected
[ 2.650835] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level,
low) -> IRQ 21
[ 2.650859] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.650885] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 3
[ 2.650932] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000dc00
[ 2.651590] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.651602] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.651612] usb usb3: Product: UHCI Host Controller
[ 2.651621] usb usb3: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[ 2.651630] usb usb3: SerialNumber: 0000:00:10.1
[ 2.652107] usb usb3: configuration #1 chosen from 1 choice
[ 2.652320] hub 3-0:1.0: USB hub found
[ 2.652351] hub 3-0:1.0: 2 ports detected
[ 2.652521] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level,
low) -> IRQ 21
[ 2.652546] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.652571] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 4
[ 2.652619] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
[ 2.652724] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.652734] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.652744] usb usb4: Product: UHCI Host Controller
[ 2.652753] usb usb4: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[ 2.652762] usb usb4: SerialNumber: 0000:00:10.2
[ 2.653165] usb usb4: configuration #1 chosen from 1 choice
[ 2.653354] hub 4-0:1.0: USB hub found
[ 2.653382] hub 4-0:1.0: 2 ports detected
[ 2.653542] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level,
low) -> IRQ 21
[ 2.653564] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.653589] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 5
[ 2.653635] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400
[ 2.653741] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.653752] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.653762] usb usb5: Product: UHCI Host Controller
[ 2.653771] usb usb5: Manufacturer: Linux 2.6.32-5-486 uhci_hcd
[ 2.653780] usb usb5: SerialNumber: 0000:00:10.3
[ 2.655262] usb usb5: configuration #1 chosen from 1 choice
[ 2.657290] hub 5-0:1.0: USB hub found
[ 2.657330] hub 5-0:1.0: 2 ports detected
[ 2.658941] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.658969] ACPI: Thermal Zone [THRM] (-248 C)
[ 2.804033] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.820422] ata3.00: CFA: RIDATA CF, 20080820, max UDMA/66
[ 2.820434] ata3.00: 15662304 sectors, multi 0: LBA
[ 2.836311] ata3.00: configured for UDMA/66
[ 3.016021] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 3.027070] scsi 2:0:0:0: Direct-Access ATA RIDATA CF 2008
PQ: 0 ANSI: 5
[ 3.200804] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 3.222469] fan PNP0C0B:00: registered as cooling_device0
[ 3.222495] ACPI: Fan [FAN] (on)
[ 3.325995] sd 2:0:0:0: [sda] 15662304 512-byte logical blocks: (8.01
GB/7.46 GiB)
[ 3.326113] sd 2:0:0:0: [sda] Write Protect is off
[ 3.326124] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.326175] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.326507] sda: sda1
[ 3.328662] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.429694] usb 4-1: New USB device found, idVendor=051d, idProduct=0002
[ 3.429708] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.429720] usb 4-1: Product: Back-UPS 500 FW: 6.1.D USB FW: c1
[ 3.429729] usb 4-1: Manufacturer: American Power Conversion
[ 3.429738] usb 4-1: SerialNumber: AB0104342351
[ 3.430017] usb 4-1: configuration #1 chosen from 1 choice
[ 3.684023] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 3.842668] usb 4-2: New USB device found, idVendor=067b, idProduct=2303
[ 3.842679] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.842690] usb 4-2: Product: USB-Serial Controller
[ 3.842698] usb 4-2: Manufacturer: Prolific Technology Inc.
[ 3.842956] usb 4-2: configuration #1 chosen from 1 choice
[ 3.904730] usbcore: registered new interface driver hiddev
[ 4.457628] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.00
Device [American Power Conversion Back-UPS 500 FW: 6.1.D USB FW: c1 ] on
usb-0000:00:10.2-1/input0
[ 4.457719] usbcore: registered new interface driver usbhid
[ 4.458102] usbhid: v2.6:USB HID core driver
[ 5.046462] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 5.046476] EXT4-fs (sda1): write access will be enabled during recovery
[ 7.218353] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 7.218376] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode
15036
[ 7.218450] EXT4-fs (sda1): 1 orphan inode deleted
[ 7.218460] EXT4-fs (sda1): recovery complete
[ 7.947102] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 8.436526] udev: starting version 160
[ 9.048954] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.240451] processor LNXCPU:00: registered as cooling_device1
[ 9.278144] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 9.278169] ACPI: Power Button [PWRB]
[ 9.278464] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 9.278489] ACPI: Sleep Button [SLPB]
[ 9.278815] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 9.278831] ACPI: Power Button [PWRF]
[ 9.358853] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 9.396864] usbcore: registered new interface driver usbserial
[ 9.397275] USB Serial support registered for generic
[ 9.397676] usbcore: registered new interface driver usbserial_generic
[ 9.397687] usbserial: USB Serial Driver core
[ 9.453640] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.470354] parport_pc 00:09: reported by Plug and Play ACPI
[ 9.470395] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 9.521683] dahdi: Telephony Interface Registered on major 196
[ 9.521695] dahdi: Version: 2.2.1.1
[ 9.553872] USB Serial support registered for pl2303
[ 9.554668] pl2303 4-2:1.0: pl2303 converter detected
[ 9.561711] wctdm 0000:00:14.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.568852] usb 4-2: pl2303 converter now attached to ttyUSB0
[ 9.568901] usbcore: registered new interface driver pl2303
[ 9.568910] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 9.575267] Freshmaker version: 71
[ 9.575636] Freshmaker passed register test
[ 10.268275] Module 0: Installed -- AUTO FXO (FCC mode)
[ 11.444783] Module 1: Installed -- AUTO FXS/DPO
[ 12.618873] Module 2: Installed -- AUTO FXS/DPO
[ 13.819241] Module 3: Installed -- AUTO FXS/DPO
[ 13.853228] Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
[ 13.902556] wcopenpci: Module loaded
[ 14.072805] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 14.072832] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22
(level, low) -> IRQ 22
[ 14.073020] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 15.688597] loop: module loaded
[ 17.331041] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 18.671955] dahdi: Registered tone zone 0 (United States / North America)
[ 19.073950] dahdi_echocan_oslec: Registered echo canceler 'OSLEC'
[ 27.712019] eth0: no IPv6 routers present
CPU0
0: 49 IO-APIC-edge timer
1: 2 IO-APIC-edge i8042
4: 203 IO-APIC-edge serial
7: 0 IO-APIC-edge parport0
8: 0 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
14: 5538 IO-APIC-edge pata_via
15: 0 IO-APIC-edge pata_via
17: 995763 IO-APIC-fasteoi wctdm
20: 0 IO-APIC-fasteoi sata_via
21: 10451 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2,
uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5
22: 45987 IO-APIC-fasteoi VIA8237
23: 5091 IO-APIC-fasteoi eth0
NMI: 0 Non-maskable interrupts
LOC: 212665 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
PND: 0 Performance pending work
ERR: 0
MIS: 0
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-486
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages dahdi-source depends on:
ii bzip2 1.0.5-4 high-quality block-sorting file co
ii debhelper 8.0.0 helper programs for debian/rules
ii module-assistant 0.11.3 tool to make module package creati
Versions of packages dahdi-source recommends:
ii dahdi-linux 1:2.3.0.1+dfsg-1 DAHDI telephony interface - Linux
dahdi-source suggests no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
