Package: linux-2.6
Version: 2.6.32-15
Severity: important
The 2.6.32-5-686 kernel uses libata rather than the old IDE driver,
which is fine I suppose, but I wanted to use the old IDE driver so I
could still use hdparm for e.g. enabling/disabling DMA post-boot (I
could go into why, but you probably don't want to know :-)). I
eventually figured out how to do this, but it kept waiting for the root
all the time. A bit of poking around later, I realised
ide-pci-generic.ko was missing from the initrd, so I checked my "real"
/lib/modules and sure enough, it was missing from the 2.6.32-5-686 tree.
I could be wrong, but I think this means the old IDE driver is largely
impossible to use without building a custom kernel. Since *most*
old-IDE-driver-related kernel modules are still being built, I presume
this was unintentional, so I'm reporting it as a bug.
I can only guess at how general this problem is, so I'm reporting it for
the particular package I've personally had the trouble with.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-15) (b...@decadent.org.uk) (gcc
version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1 04:59:47 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686
root=UUID=c5e95b09-66b2-4eb3-94d7-fe188b4eda1b ro nohz=off clocksource=notsc
libata.dma=0 quiet
** Not tainted
** Kernel log:
[ 3.063728] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 3.063811] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus
number 2
[ 3.063885] uhci_hcd 0000:00:07.3: irq 11, io base 0x0000d800
[ 3.064284] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.064295] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.064304] usb usb2: Product: UHCI Host Controller
[ 3.064311] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 3.064318] usb usb2: SerialNumber: 0000:00:07.3
[ 3.067070] usb usb2: configuration #1 chosen from 1 choice
[ 3.067921] hub 2-0:1.0: USB hub found
[ 3.068190] hub 2-0:1.0: 2 ports detected
[ 3.085946] 8139too Fast Ethernet driver 0.9.28
[ 3.087325] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
[ 3.087338] PCI: setting IRQ 12 as level-triggered
[ 3.087355] 8139too 0000:00:0f.0: PCI INT A -> Link[LNKC] -> GSI 12 (level,
low) -> IRQ 12
[ 3.090692] eth0: RealTek RTL8139 at 0xdc00, 00:30:bd:72:4a:3a, IRQ 12
[ 3.256550] ata1.00: ATA-6: ST380011A, 8.01, max UDMA/100
[ 3.256565] ata1.00: 156301488 sectors, multi 16: LBA48
[ 3.272541] ata1.00: configured for PIO4
[ 3.273110] scsi 0:0:0:0: Direct-Access ATA ST380011A 8.01
PQ: 0 ANSI: 5
[ 3.372097] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 3.436443] ata2.01: ATAPI: _NEC DVD_RW ND-2510A, 2.18, max UDMA/33
[ 3.444387] ata2.01: configured for PIO4
[ 3.446631] scsi 1:0:1:0: CD-ROM _NEC DVD_RW ND-2510A 2.18
PQ: 0 ANSI: 5
[ 3.549170] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 3.549453] sd 0:0:0:0: [sda] Write Protect is off
[ 3.549466] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.549640] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.550564] sda: sda1 sda2 sda3 <
[ 3.574244] usb 1-1: New USB device found, idVendor=0ace, idProduct=1215
[ 3.574260] usb 1-1: New USB device strings: Mfr=16, Product=32,
SerialNumber=0
[ 3.574270] usb 1-1: Product: USB2.0 WLAN
[ 3.574276] usb 1-1: Manufacturer: ZyDAS
[ 3.574739] usb 1-1: configuration #1 chosen from 1 choice
[ 3.578216] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 3.578233] Uniform CD-ROM driver Revision: 3.20
[ 3.580210] sda5 sda6
[ 3.590031] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 3.601410] sda7 > sda4
[ 3.612601] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.727737] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.731225] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 4.841688] PM: Starting manual resume from disk
[ 4.841715] PM: Resume from partition 8:1
[ 4.841720] PM: Checking hibernation image.
[ 4.855577] PM: Error -22 checking image file
[ 4.855588] PM: Resume from disk failed.
[ 8.614002] udev: starting version 157
[ 9.696246] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.992409] Marking TSC unstable due to TSC halts in idle
[ 11.009206] processor LNXCPU:00: registered as cooling_device0
[ 11.011056] Switching to clocksource acpi_pm
[ 11.039358] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 11.039431] ACPI: Power Button [PWRB]
[ 11.040619] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 11.040666] ACPI: Power Button [PWRF]
[ 11.204012] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.378209] parport_pc: VIA 686A/8231 detected
[ 11.378232] parport_pc: probing current configuration
[ 11.378261] parport_pc: Current parallel port base: 0x378
[ 11.378370] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 11.468522] parport_pc: VIA parallel port: io=0x378, irq=7
[ 12.303195] cfg80211: Using static regulatory domain info
[ 12.303208] cfg80211: Regulatory domain: US
[ 12.303214] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 12.303224] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 12.303234] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.303243] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.303252] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.303261] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 12.303269] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 12.307231] cfg80211: Calling CRDA for country: US
[ 12.912145] usb 1-1: reset full speed USB device using uhci_hcd and address 2
[ 13.303449] phy0: Selected rate control algorithm 'minstrel'
[ 13.306317] zd1211rw 1-1:1.0: phy0
[ 13.306447] usbcore: registered new interface driver zd1211rw
[ 13.847782] ENS1371 0000:00:10.0: PCI INT A -> Link[LNKD] -> GSI 11 (level,
low) -> IRQ 11
[ 16.905746] Adding 514040k swap on /dev/sda1. Priority:-1 extents:1
across:514040k
[ 18.291596] loop: module loaded
[ 28.832142] ENS1371 0000:00:10.0: PCI INT A disabled
[ 28.838092] gameport: kgameportd exiting
[ 29.604101] ENS1371 0000:00:10.0: PCI INT A -> Link[LNKD] -> GSI 11 (level,
low) -> IRQ 11
[ 30.892820] TCP westwood registered
[ 31.841601] usb 1-1: firmware: requesting zd1211/zd1211b_ub
[ 31.906286] usb 1-1: firmware: requesting zd1211/zd1211b_uphr
[ 32.113580] zd1211rw 1-1:1.0: firmware version 4725
[ 32.173573] zd1211rw 1-1:1.0: zd1211b chip 0ace:1215 v4810 full 00-1a-ee
UW2453_RF pa0 -7---
[ 32.177640] cfg80211: Calling CRDA for country: DE
[ 32.225751] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.102902] wlan0: direct probe to AP 00:1d:0f:ec:53:ae (try 1)
[ 36.106262] wlan0: direct probe responded
[ 36.106289] wlan0: authenticate with AP 00:1d:0f:ec:53:ae (try 1)
[ 36.113114] wlan0: authenticated
[ 36.113776] wlan0: associate with AP 00:1d:0f:ec:53:ae (try 1)
[ 36.117409] wlan0: RX AssocResp from 00:1d:0f:ec:53:ae (capab=0x31 status=0
aid=1)
[ 36.117429] wlan0: associated
[ 36.118090] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.118361] cfg80211: Calling CRDA for country: YE
[ 36.242932] padlock: VIA PadLock not detected.
[ 46.797694] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
aes_i586 6816 3
aes_generic 25738 1 aes_i586
tcp_westwood 1473 0
snd_ens1371 13570 0
gameport 6061 1 snd_ens1371
snd_ac97_codec 79148 1 snd_ens1371
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47214 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 2 snd_ens1371,snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 34363 9
snd_ens1371,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
snd_page_alloc 5045 1 snd_pcm
cpufreq_conservative 4018 0
cpufreq_userspace 1480 0
cpufreq_stats 1940 0
cpufreq_powersave 602 0
battery 3782 0
loop 9757 0
arc4 974 2
ecb 1405 2
zd1211rw 32550 0
mac80211 123258 1 zd1211rw
via686a 7301 0
cfg80211 87601 2 zd1211rw,mac80211
tpm_tis 5496 0
i2c_viapro 4419 0
tpm 8137 1 tpm_tis
parport_pc 15799 0
rfkill 10264 1 cfg80211
shpchp 21220 0
tpm_bios 3569 1 tpm
evdev 5609 3
button 3598 0
processor 26599 1
parport 22554 1 parport_pc
i2c_core 12696 1 i2c_viapro
pci_hotplug 18065 1 shpchp
ext2 46293 5
mbcache 3762 1 ext2
sg 15968 0
sr_mod 10770 0
sd_mod 25869 7
cdrom 26487 1 sr_mod
crc_t10dif 1012 1 sd_mod
ata_generic 2019 0
8139too 14949 0
uhci_hcd 16057 0
pata_via 5701 6
8139cp 13421 0
thermal 9206 0
ehci_hcd 27763 0
libata 115665 2 ata_generic,pata_via
floppy 40923 0
mii 2714 2 8139too,8139cp
usbcore 98402 4 zd1211rw,uhci_hcd,ehci_hcd
thermal_sys 9378 2 processor,thermal
nls_base 4541 1 usbcore
scsi_mod 101401 4 sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] [1106:0691] (rev 44)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] [1106:8598] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South]
[1106:0686] (rev 15)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
[1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: parport_pc
00:07.1 IDE interface [0101]: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
(prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[size=1]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: pata_via
00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 06) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 06) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard
[0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:07.4 Host bridge [0600]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
[1106:3057] (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
00:0e.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA 2064W
[Millennium] [102b:0519] (rev 01) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16K]
Region 1: Memory at e5000000 (32-bit, prefetchable) [size=8M]
Expansion ROM at e6000000 [disabled] [size=64K]
00:0f.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Subsystem: Belkin F5D5000 PCI Card/Desktop Network PCI Card [1799:5000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 12
Region 0: I/O ports at dc00 [size=256]
Region 1: Memory at e8000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at e7000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
00:10.0 Multimedia audio controller [0401]: Ensoniq ES1371 [AudioPCI-97]
[1274:1371] (rev 08)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
[1274:1371]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e000 [size=64]
Capabilities: <access denied>
Kernel driver in use: ENS1371
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0ace:1215 ZyDAS ZD1211B 802.11g
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.32 Debian configuration management sy
ii initramfs-tools [linux-initr 0.94.4 tools for generating an initramfs
ii linux-base 2.6.32-15 Linux image base package
ii module-init-tools 3.12~pre2-3 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-15 Binary firmware for various driver
ii libc6-i686 2.11.1-3 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-61 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/prerm/would-invalidate-boot-loader-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/bootloader-test-error-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/bootloader-error-2.6.32-5-686:
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
