Hi, lsusb shows:
Bus 001 Device 006: ID 050d:815f Belkin Components Realtek RTL8192SU [F5D8053 N Wireless USB Adapter v6000] while "dmesg" shows: [ 1.232523] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1.366483] usb 1-6: New USB device found, idVendor=050d, idProduct=815f [ 1.366486] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.366489] usb 1-6: Product: RTL8191S WLAN Adapter [ 1.366492] usb 1-6: Manufacturer: Manufacturer Realtek [ 1.366494] usb 1-6: SerialNumber: 00e04c000001 [ 29.913647] usb 1-6: firmware: requesting RTL8192SU/rtl8192sfw.bin When connecting with wicd, /var/log/kern.log show: May 13 19:42:06 localhost kernel: [ 5673.576521] rtl819xU:==========>rtl8192_down() May 13 19:42:06 localhost kernel: [ 5673.576523] May 13 19:42:06 localhost kernel: [ 5673.588550] rtl819xU:<==========rtl8192_down() May 13 19:42:06 localhost kernel: [ 5673.588552] May 13 19:42:06 localhost kernel: [ 5673.588556] =====>rtl8192SU_link_change 1 May 13 19:42:06 localhost kernel: [ 5673.589340] <=====rtl8192SU_link_change 2 May 13 19:42:06 localhost kernel: [ 5673.602038] rtl819xU: --->FirmwareDownload92S() May 13 19:42:06 localhost kernel: [ 5673.602040] May 13 19:42:06 localhost kernel: [ 5673.602043] rtl819xU:--->FirmwareDownloadCode() May 13 19:42:06 localhost kernel: [ 5673.602044] May 13 19:42:06 localhost kernel: [ 5673.602068] rtl819xU:--->FirmwareCheckReady(): LoadStaus(1), May 13 19:42:06 localhost kernel: [ 5673.603034] rtl819xU:<---FirmwareCheckReady(): LoadFWStatus(1), rtStatus(0) May 13 19:42:06 localhost kernel: [ 5673.603035] May 13 19:42:06 localhost kernel: [ 5673.603037] rtl819xU:--->FirmwareDownloadCode() May 13 19:42:06 localhost kernel: [ 5673.603038] May 13 19:42:06 localhost kernel: [ 5673.603060] rtl819xU:--->FirmwareCheckReady(): LoadStaus(2), May 13 19:42:06 localhost kernel: [ 5673.604165] rtl819xU:-->FirmwareEnableCPU() May 13 19:42:06 localhost kernel: [ 5673.604166] May 13 19:42:06 localhost kernel: [ 5673.605912] rtl819xU:IMEM Ready after CPU has refilled. May 13 19:42:06 localhost kernel: [ 5673.605915] May 13 19:42:06 localhost kernel: [ 5673.605917] rtl819xU:<--FirmwareEnableCPU(): rtStatus(0x0) May 13 19:42:06 localhost kernel: [ 5673.605919] May 13 19:42:06 localhost kernel: [ 5673.605921] rtl819xU:<---FirmwareCheckReady(): LoadFWStatus(2), rtStatus(0) May 13 19:42:06 localhost kernel: [ 5673.605923] May 13 19:42:06 localhost kernel: [ 5673.605926] rtl819xU:--->FirmwareDownloadCode() May 13 19:42:06 localhost kernel: [ 5673.605927] May 13 19:42:06 localhost kernel: [ 5673.605933] rtl819xU:--->FirmwareCheckReady(): LoadStaus(3), May 13 19:42:06 localhost kernel: [ 5673.606161] rtl819xU:DMEM code download success, CPUStatus(0x3f) May 13 19:42:06 localhost kernel: [ 5673.606163] May 13 19:42:06 localhost kernel: [ 5673.607536] rtl819xU:Polling Load Firmware ready, CPUStatus(ff) May 13 19:42:06 localhost kernel: [ 5673.607537] May 13 19:42:06 localhost kernel: [ 5673.608537] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e) May 13 19:42:06 localhost kernel: [ 5673.608538] May 13 19:42:06 localhost kernel: [ 5673.608664] rtl819xU:<---FirmwareCheckReady(): LoadFWStatus(3), rtStatus(0) May 13 19:42:06 localhost kernel: [ 5673.608666] May 13 19:42:06 localhost kernel: [ 5673.608668] rtl819xU:Firmware Download Success!! May 13 19:42:06 localhost kernel: [ 5673.608669] May 13 19:42:09 localhost kernel: [ 5676.323590] ADDRCONF(NETDEV_UP): wlan0: link is not ready May 13 19:42:09 localhost kernel: [ 5676.384723] r8169 0000:04:00.0: eth0: link down May 13 19:42:09 localhost kernel: [ 5676.385425] ADDRCONF(NETDEV_UP): eth0: link is not ready May 13 19:42:09 localhost kernel: [ 5676.409527] rtl819xU:==========>rtl8192_down() May 13 19:42:09 localhost kernel: [ 5676.409530] May 13 19:42:09 localhost kernel: [ 5676.421798] rtl819xU:<==========rtl8192_down() May 13 19:42:09 localhost kernel: [ 5676.421800] May 13 19:42:09 localhost kernel: [ 5676.423331] =====>rtl8192SU_link_change 1 May 13 19:42:09 localhost kernel: [ 5676.424182] <=====rtl8192SU_link_change 2 May 13 19:42:09 localhost kernel: [ 5676.449524] rtl819xU: --->FirmwareDownload92S() May 13 19:42:09 localhost kernel: [ 5676.449527] May 13 19:42:09 localhost kernel: [ 5676.449530] rtl819xU:--->FirmwareDownloadCode() May 13 19:42:09 localhost kernel: [ 5676.449531] May 13 19:42:09 localhost kernel: [ 5676.449581] rtl819xU:--->FirmwareCheckReady(): LoadStaus(1), May 13 19:42:09 localhost kernel: [ 5676.450647] rtl819xU:<---FirmwareCheckReady(): LoadFWStatus(1), rtStatus(0) May 13 19:42:09 localhost kernel: [ 5676.450649] May 13 19:42:09 localhost kernel: [ 5676.450650] rtl819xU:--->FirmwareDownloadCode() May 13 19:42:09 localhost kernel: [ 5676.450652] May 13 19:42:09 localhost kernel: [ 5676.450707] rtl819xU:--->FirmwareCheckReady(): LoadStaus(2), May 13 19:42:09 localhost kernel: [ 5676.451900] rtl819xU:-->FirmwareEnableCPU() May 13 19:42:09 localhost kernel: [ 5676.451902] May 13 19:42:09 localhost kernel: [ 5676.453900] rtl819xU:IMEM Ready after CPU has refilled. May 13 19:42:09 localhost kernel: [ 5676.453902] May 13 19:42:09 localhost kernel: [ 5676.453904] rtl819xU:<--FirmwareEnableCPU(): rtStatus(0x0) May 13 19:42:09 localhost kernel: [ 5676.453906] May 13 19:42:09 localhost kernel: [ 5676.453908] rtl819xU:<---FirmwareCheckReady(): LoadFWStatus(2), rtStatus(0) May 13 19:42:09 localhost kernel: [ 5676.453909] May 13 19:42:09 localhost kernel: [ 5676.453912] rtl819xU:--->FirmwareDownloadCode() May 13 19:42:09 localhost kernel: [ 5676.453913] May 13 19:42:09 localhost kernel: [ 5676.453918] rtl819xU:--->FirmwareCheckReady(): LoadStaus(3), May 13 19:42:09 localhost kernel: [ 5676.454148] rtl819xU:DMEM code download success, CPUStatus(0x3f) May 13 19:42:09 localhost kernel: [ 5676.454150] May 13 19:42:09 localhost kernel: [ 5676.455273] rtl819xU:Polling Load Firmware ready, CPUStatus(ff) May 13 19:42:09 localhost kernel: [ 5676.455274] May 13 19:42:09 localhost kernel: [ 5676.456274] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e) May 13 19:42:09 localhost kernel: [ 5676.456277] May 13 19:42:09 localhost kernel: [ 5676.456393] rtl819xU:<---FirmwareCheckReady(): LoadFWStatus(3), rtStatus(0) May 13 19:42:09 localhost kernel: [ 5676.456395] May 13 19:42:09 localhost kernel: [ 5676.456397] rtl819xU:Firmware Download Success!! May 13 19:42:09 localhost kernel: [ 5676.456398] May 13 19:42:12 localhost kernel: [ 5679.172583] ADDRCONF(NETDEV_UP): wlan0: link is not ready May 13 19:42:14 localhost kernel: [ 5681.209539] =====>rtl8192SU_link_change 1 May 13 19:42:14 localhost kernel: [ 5681.210373] <=====rtl8192SU_link_change 2 May 13 19:42:14 localhost kernel: [ 5681.260768] =====>rtl8192SU_link_change 1 May 13 19:42:14 localhost kernel: [ 5681.260791] Linking with JIMENEZ,channel:1, qos:0, myHT:1, networkHT:0, mode:6 May 13 19:42:14 localhost kernel: [ 5681.262254] <=====rtl8192SU_link_change 2 May 13 19:42:14 localhost kernel: [ 5681.262258] =====>rtl8192SU_link_change 1 May 13 19:42:14 localhost kernel: [ 5681.263498] <=====rtl8192SU_link_change 2 May 13 19:42:14 localhost kernel: [ 5681.263502] ===>ieee80211_associate_procedure_wq(), chan:1 May 13 19:42:14 localhost kernel: [ 5681.312842] rtl819xU:==>SetBWModeCallback8192SUsbWorkItem() Switch to 20MHz bandwidth May 13 19:42:14 localhost kernel: [ 5681.312844] May 13 19:42:14 localhost kernel: [ 5681.326998] rtl819xU:<==SetBWModeCallback8192SUsbWorkItem() May 13 19:42:14 localhost kernel: [ 5681.327003] =================>ieee80211_authentication_req():auth->algorithm is 0 May 13 19:42:14 localhost kernel: [ 5681.327787] Linking with JIMENEZ,channel:1, qos:0, myHT:1, networkHT:0, mode:6 May 13 19:42:14 localhost kernel: [ 5681.327813] Linking with JIMENEZ,channel:1, qos:0, myHT:1, networkHT:0, mode:6 May 13 19:42:14 localhost kernel: [ 5681.327872] =====>rtl8192SU_link_change 1 May 13 19:42:14 localhost kernel: [ 5681.328885] <=====rtl8192SU_link_change 2 May 13 19:42:14 localhost kernel: [ 5681.328888] ===>ieee80211_associate_procedure_wq(), chan:1 May 13 19:42:14 localhost kernel: [ 5681.378091] rtl819xU:==>SetBWModeCallback8192SUsbWorkItem() Switch to 20MHz bandwidth May 13 19:42:14 localhost kernel: [ 5681.378093] May 13 19:42:14 localhost kernel: [ 5681.392250] rtl819xU:<==SetBWModeCallback8192SUsbWorkItem() May 13 19:42:14 localhost kernel: [ 5681.392254] =================>ieee80211_authentication_req():auth->algorithm is 0 May 13 19:42:14 localhost kernel: [ 5681.392279] Linking with JIMENEZ,channel:1, qos:0, myHT:1, networkHT:0, mode:6 May 13 19:42:14 localhost kernel: [ 5681.392298] =====>rtl8192SU_link_change 1 May 13 19:42:14 localhost kernel: [ 5681.393249] <=====rtl8192SU_link_change 2 May 13 19:42:14 localhost kernel: [ 5681.393253] ===>ieee80211_associate_procedure_wq(), chan:1 May 13 19:42:14 localhost kernel: [ 5681.442809] rtl819xU:==>SetBWModeCallback8192SUsbWorkItem() Switch to 20MHz bandwidth May 13 19:42:14 localhost kernel: [ 5681.442812] May 13 19:42:14 localhost kernel: [ 5681.456999] rtl819xU:<==SetBWModeCallback8192SUsbWorkItem() May 13 19:42:14 localhost kernel: [ 5681.457003] =================>ieee80211_authentication_req():auth->algorithm is 0 May 13 19:42:14 localhost kernel: [ 5681.465010] rtl819xU:rtl8192_qos_association_resp: network->flags = 2,0 May 13 19:42:14 localhost kernel: [ 5681.465012] May 13 19:42:14 localhost kernel: [ 5681.465023] rtl819xU:qos active process with associate response received May 13 19:42:14 localhost kernel: [ 5681.465025] May 13 19:42:14 localhost kernel: [ 5681.465033] Associated successfully May 13 19:42:14 localhost kernel: [ 5681.465035] Using G rates:108 May 13 19:42:14 localhost kernel: [ 5681.465037] Successfully associated, ht not enabled(0, 0) May 13 19:42:14 localhost kernel: [ 5681.465040] =====>rtl8192SU_link_change 1 May 13 19:42:14 localhost kernel: [ 5681.467626] =============>ARFR0+rate_index*4:0xfff May 13 19:42:14 localhost kernel: [ 5681.475624] <=====rtl8192SU_link_change 2 May 13 19:42:14 localhost kernel: [ 5681.475626] ============>normal associate May 13 19:42:14 localhost kernel: [ 5681.476344] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready May 13 19:42:14 localhost kernel: [ 5681.484084] alg name:TKIP May 13 19:42:14 localhost kernel: [ 5681.484100] rtl819xU:EnableHWSecurityConfig8192:, hwsec:1, pairwise_key:2, SECR_value:c May 13 19:42:14 localhost kernel: [ 5681.484102] May 13 19:42:14 localhost kernel: [ 5681.484259] rtl819xU:====>to setKey(), dev:ffff88004bfb0000, EntryNo:4, KeyIndex:0, KeyType:2, MacAddr64:68:0c:2f:71:0a May 13 19:42:14 localhost kernel: [ 5681.484261] May 13 19:42:14 localhost kernel: [ 5681.488260] alg name:TKIP May 13 19:42:14 localhost kernel: [ 5681.488275] rtl819xU:====>to setKey(), dev:ffff88004bfb0000, EntryNo:1, KeyIndex:1, KeyType:2, MacAddrff:ff:ff:ff:ff:ff May 13 19:42:14 localhost kernel: [ 5681.488277] May 13 19:42:16 localhost kernel: [ 5683.169621] dm_check_edca_turbo():iot peer is 0x0:unknown, bssid:64:68:0c:2f:71:0a May 13 19:42:24 localhost kernel: [ 5691.936010] wlan0: no IPv6 routers present Hope it helps a bit. -- Miguel J. Jiménez Sevilla, ESP (Unión Europea) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
