Package: linux-image-2.6.32-4-686 Version: 2.6.32-10 Severity: normal
I will be verbose mainly to help the kernel team, because i suspect this problem will arise for others during this libata transition. Dear maintainter, this bug has documentation purposes: treat it as you like. It isn't really a bug: it's a mixture of buggy BIOS and kernel design decisions that, on some non-new hardware, can cause serious trouble during this transition. And however, as reported below, i've already managed to find a workaround. The problem: after rebooting with the new libata enabled kernel, my system immediately stopped the boot phase showing filesystem problems and asking me to do an fsck. The reported cause was an home partition that overflow the disk size. I haven't run the suggested fsck, but rather some investigation and to my surprise i discovered that my 160 GB hard disk is now seen as a 137 GB! As a consequence this made invisible my swap partition (beyond 137 GB) and my home partition is partially seen. Weird, particular because the old ide system has never complained. And strange because this is a tipical ATA/BIOS limit number: 528 MB, 8 GB, 137 GB. Also i couldn't see relations to the fact that i've updated myself fstab and grub config file to use /dev/disk/by-uuid/. I have a Sony VGN-B3VP notebook that came with a 60 GB Hitachi hard disk. Some month ago i have bougth the current 160 GB Samsung hard disk, and Debian seemed to be happy with it. However Google have given me the answer to these troubles, and it's named HPA (Host Protected Area): http://en.wikipedia.org/wiki/Host_protected_area And seems that other distribution that has made the libata transition have been somewhat hit by this problem: http://osdir.com/ml/linux.ubuntu.devel.kernel.general/2007-09/msg00006.html Entering my bios i've found my drive declared effectively as 137 GB! Never noticed before. Then, rebooting with the previous 2.6.32-3-686 kernel i've found these messages: [ 4.563873] hda: Host Protected Area detected. [ 4.563874] current capacity is 268435455 sectors (137438 MB) [ 4.563876] native capacity is 312581808 sectors (160041 MB) [ 4.563880] hda: 268435455 sectors (137438 MB) w/8192KiB Cache, CHS=16709/255/63 [ 4.565793] hda: cache flushes supported [ 4.565846] hda: hda1 hda2 hda3 [ 4.592183] hda: p2 size 262148670 exceeds device capacity, enabling native capacity [ 4.597405] hda: detected capacity change from 137438952960 to 160041885696 So my BIOS is forcing the OS to see not more than 137 GB. Someone say that some vendors work this way to avoid non authorized hardware. However no BIOS update available, no BIOS settings i can tweak. But it's clear that libata treat HPA in a different way than old IDE: the latter will enable it, showing the entire disk capacity, libata not. And this is the cause of my problem. Eventually i've found a kernel command line parameter in kernel-parameters.txt.gz that solved my problem: libata.ignore_hpa=1 And now i'm writing this bug with the libata enabled kernel. :-) Thinking about it, i believe that it's right to leave tha HPA behaviour as it is now. There are manufacturers that use this area for recovery purposes and other stuff. If someone wants really workaround a vendor barrier (buggy like mine or not) then he can do it (with the boot option). Ben, kernel team, i only suggest you to add a check in your migration script: maybe you can lookup for "Host Protected Area detected" in dmesg during the kernel install and, if that string is found, you can show a warning message, informing that there can be problem on the next reboot. An example: ---------------------------------------------- WARNING: Host Protected Area found on your hard disk. The kernel you are installing can potentially view a disk capacity lower that the real one, causing fail on mounting some partitions. It could be necessary to add this kernel command line options: libata.ignore_hpa=1$ ---------------------------------------------- It's also important that if, during the boot with the libata kernel, the user will be asked to do an fsck, like me, he must not follow the request or, i think, he would massively corrupt its filesystem. Hope to help. Cesare. -- Package-specific info: ** Version: Linux version 2.6.32-4-686 (Debian 2.6.32-10) ([email protected]) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Wed Mar 17 17:16:41 UTC 2010 ** Command line: root=/dev/disk/by-uuid/07b633c9-1242-48ee-a6f4-f37c43f639fd ro quiet lapic hpet=force libata.ignore_hpa=1 ** Not tainted ** Kernel log: [ 2.796115] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.807467] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.807774] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.163963] kjournald starting. Commit interval 5 seconds [ 3.163972] EXT3-fs: mounted filesystem with ordered data mode. [ 4.736269] udev: starting version 151 [ 5.142660] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 5.199941] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 5.436093] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5 [ 5.436305] ACPI: AC Adapter [ACAD] (on-line) [ 5.458178] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 5.464305] intel_rng: FWH not detected [ 5.474558] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.577994] Marking TSC unstable due to TSC halts in idle [ 5.578808] processor LNXCPU:00: registered as cooling_device0 [ 5.579171] Switching to clocksource hpet [ 5.638316] lib80211: common routines for IEEE802.11 drivers [ 5.638320] lib80211_crypt: registered algorithm 'NULL' [ 5.681842] sony-laptop: Sony Programmable IO Control Driver v0.6. [ 5.681860] sony-laptop: detected Type2 model [ 5.682264] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0c/SNY6001:00/input/input7 [ 5.682646] input: Sony Vaio Jogdial as /devices/virtual/input/input8 [ 5.683121] sony-laptop: device allocated minor is 57 [ 5.684227] sony-laptop: Sony Notebook Control Driver v0.6. [ 5.696206] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 5.696210] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 5.721992] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 5.721996] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 5.722091] ipw2200 0000:02:0b.0: power state changed by ACPI to D0 [ 5.722106] ipw2200 0000:02:0b.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9 [ 5.722633] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 5.722684] ipw2200 0000:02:0b.0: firmware: requesting ipw2200-bss.fw [ 5.761763] i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 5.761771] ACPI: I/O resource 0000:00:1f.3 [0x1880-0x189f] conflicts with ACPI region SBUS [0x1880-0x188f] [ 5.761904] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.855979] ACPI: Battery Slot [BAT1] (battery present) [ 6.072693] ipw2200: Radio Frequency Kill Switch is On: [ 6.072695] Kill switch must be turned off for wireless networking to work. [ 6.073942] ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [ 6.074194] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5 [ 6.074199] PCI: setting IRQ 5 as level-triggered [ 6.074205] tifm_7xx1 0000:02:04.3: PCI INT B -> Link[LNKF] -> GSI 5 (level, low) -> IRQ 5 [ 6.074508] yenta_cardbus 0000:02:04.0: CardBus bridge found [104d:818f] [ 6.074523] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions [ 6.074528] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI [ 6.074532] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI [ 6.074537] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01001b22, devctl 0x64 [ 6.096048] tifm_core: MMC/SD card detected in socket 0:0 [ 6.231762] Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 6.231785] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 [ 6.304759] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c98, PCI irq 9 [ 6.304764] yenta_cardbus 0000:02:04.0: Socket status: 30000006 [ 6.304769] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 6.304779] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 6.304785] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean. [ 6.305075] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 6.305080] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff [ 6.336056] MC'97 1 converters and GPIO not ready (0xff00) [ 6.336725] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9 [ 6.336779] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 6.741160] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 [ 6.743490] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x800-0x8ff: clean. [ 6.744166] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean. [ 6.744912] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 7.260025] intel8x0_measure_ac97_clock: measured 55415 usecs (2670 samples) [ 7.260029] intel8x0: clocking to 48000 [ 7.936979] Adding 5245212k swap on /dev/sda3. Priority:-1 extents:1 across:5245212k [ 8.088285] EXT3 FS on sda1, internal journal [ 8.897517] kjournald starting. Commit interval 5 seconds [ 8.897751] EXT3 FS on sda2, internal journal [ 8.897756] EXT3-fs: mounted filesystem with ordered data mode. [ 9.936050] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.008154] nf_conntrack version 0.5.0 (16019 buckets, 64076 max) [ 10.008682] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 10.008686] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 10.008688] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 10.230197] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.162007] fuse init (API version 7.13) [ 11.419090] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9 [ 18.570608] Bluetooth: Core ver 2.15 [ 18.570718] NET: Registered protocol family 31 [ 18.570724] Bluetooth: HCI device and connection manager initialized [ 18.570732] Bluetooth: HCI socket layer initialized [ 18.640270] Bluetooth: L2CAP ver 2.14 [ 18.640277] Bluetooth: L2CAP socket layer initialized [ 18.655787] Bluetooth: RFCOMM TTY layer initialized [ 18.655791] Bluetooth: RFCOMM socket layer initialized [ 18.656027] Bluetooth: RFCOMM ver 1.11 [ 18.768635] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.768639] Bluetooth: BNEP filters: protocol multicast [ 18.834253] Bridge firewalling registered [ 19.095429] Bluetooth: SCO (Voice Link) ver 0.6 [ 19.095437] Bluetooth: SCO socket layer initialized [ 316.513106] PPP generic driver version 2.4.2 [ 541.000161] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 541.000889] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 543.000318] e100: eth0 NIC Link is Down [ 551.696022] eth0: no IPv6 routers present [ 563.000172] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 567.964934] NET: Registered protocol family 24 ** Model information not available ** Loaded modules: Module Size Used by xt_TCPMSS 2303 1 xt_tcpmss 1017 1 iptable_mangle 2325 1 pppoe 6849 2 pppox 1242 1 pppoe ppp_generic 16363 6 pppoe,pppox slhc 3691 1 ppp_generic sco 5837 2 bridge 32987 0 stp 996 1 bridge bnep 7444 2 rfcomm 25131 0 l2cap 21677 6 bnep,rfcomm crc16 1027 1 l2cap bluetooth 36327 6 sco,bnep,rfcomm,l2cap acpi_cpufreq 4943 0 cpufreq_conservative 4018 0 cpufreq_stats 1940 0 cpufreq_userspace 1480 0 cpufreq_powersave 602 0 uinput 4796 1 fuse 43758 1 xt_tcpudp 1743 4 nf_conntrack_ipv4 7597 6 nf_defrag_ipv4 779 1 nf_conntrack_ipv4 xt_state 927 6 nf_conntrack 38067 2 nf_conntrack_ipv4,xt_state xt_multiport 1775 1 iptable_filter 1790 1 ip_tables 7690 2 iptable_mangle,iptable_filter x_tables 8327 6 xt_TCPMSS,xt_tcpmss,xt_tcpudp,xt_state,xt_multiport,ip_tables pcmcia 17442 0 tifm_sd 6506 0 snd_intel8x0m 8100 0 snd_intel8x0 19523 5 mmc_core 38503 1 tifm_sd snd_ac97_codec 79140 2 snd_intel8x0m,snd_intel8x0 ac97_bus 710 1 snd_ac97_codec snd_pcm 47210 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec yenta_socket 16403 1 snd_seq 35463 0 rsrc_nonstatic 7057 1 yenta_socket snd_timer 12258 3 snd_pcm,snd_seq battery 3782 0 pcmcia_core 20450 3 pcmcia,yenta_socket,rsrc_nonstatic tifm_7xx1 3014 0 i2c_i801 6442 0 tifm_core 3260 2 tifm_sd,tifm_7xx1 snd_seq_device 3673 1 snd_seq ipw2200 108368 0 snd 34363 15 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device libipw 18439 1 ipw2200 sony_laptop 20205 0 rfkill 10264 4 bluetooth,sony_laptop lib80211 2870 2 ipw2200,libipw soundcore 3450 1 snd snd_page_alloc 5045 3 snd_intel8x0m,snd_intel8x0,snd_pcm processor 26599 2 acpi_cpufreq joydev 6771 0 shpchp 21220 0 evdev 5609 21 ac 1640 0 rng_core 2178 0 pcspkr 1207 0 psmouse 44413 0 serio_raw 2916 0 pci_hotplug 18065 1 shpchp ext3 94200 2 jbd 32169 1 ext3 mbcache 3762 1 ext3 sg 15964 0 sr_mod 10770 0 sd_mod 25785 4 crc_t10dif 1012 1 sd_mod cdrom 26487 1 sr_mod ata_generic 2015 0 ata_piix 17133 3 i915 220272 2 drm_kms_helper 18297 1 i915 uhci_hcd 16057 0 firewire_ohci 16509 0 libata 114416 2 ata_generic,ata_piix e100 22317 0 drm 112200 3 i915,drm_kms_helper i2c_algo_bit 3497 1 i915 firewire_core 31143 1 firewire_ohci crc_itu_t 1035 1 firewire_core button 3598 1 i915 mii 2714 1 e100 ehci_hcd 27582 0 scsi_mod 101305 4 sg,sr_mod,sd_mod,libata usbcore 98162 3 uhci_hcd,ehci_hcd nls_base 4541 1 usbcore i2c_core 12648 5 i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit video 14605 1 i915 output 1204 1 video thermal 9206 0 fan 2586 0 thermal_sys 9378 4 processor,video,thermal,fan dm_mirror 9671 0 dm_region_hash 5644 1 dm_mirror dm_log 6369 2 dm_mirror,dm_region_hash dm_mod 46078 2 dm_mirror,dm_log ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02) Subsystem: Sony Corporation Device [104d:8191] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at <unassigned> (32-bit, prefetchable) Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02) Subsystem: Sony Corporation Device [104d:8191] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02) Subsystem: Sony Corporation Device [104d:8191] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Sony Corporation Device [104d:8192] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K] Region 2: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) Subsystem: Sony Corporation Device [104d:8192] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at e0080000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Device [104d:8188] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 9 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00 [UHCI]) Subsystem: Sony Corporation Device [104d:8188] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 9 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI]) Subsystem: Sony Corporation Device [104d:8188] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 9 Region 0: Memory at e0100000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=06, sec-latency=64 I/O behind bridge: 00003000-00003fff Memory behind bridge: e0200000-e02fffff Prefetchable memory behind bridge: 40000000-43ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Sony Corporation Device [104d:8188] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Region 5: Memory at 44000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03) Subsystem: Sony Corporation Device [104d:8188] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 9 Region 4: I/O ports at 1880 [size=32] 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03) Subsystem: Sony Corporation Device [104d:81c5] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 9 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at e0100c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at e0100800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 [Generic]) Subsystem: Sony Corporation Device [104d:818c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 9 Region 0: I/O ports at 2400 [size=256] Region 1: I/O ports at 2000 [size=128] Capabilities: <access denied> Kernel driver in use: Intel ICH Modem 02:04.0 CardBus bridge [0607]: Texas Instruments PCI7420 CardBus Controller [104c:ac8e] Subsystem: Sony Corporation Device [104d:818f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at e0208000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 40000000-43fff000 (prefetchable) Memory window 1: 48000000-4bfff000 I/O window 0: 00003400-000034ff I/O window 1: 00003800-000038ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 02:04.2 FireWire (IEEE 1394) [0c00]: Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller [104c:802e] (prog-if 10 [OHCI]) Subsystem: Sony Corporation Device [104d:818f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 9 Region 0: Memory at e0207000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 02:04.3 Mass storage controller [0180]: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller [104c:ac8f] Subsystem: Sony Corporation Device [104d:8190] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at e0204000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: tifm_7xx1 02:08.0 Ethernet controller [0200]: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller [8086:103d] (rev 83) Subsystem: Sony Corporation Device [104d:818d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at e0205000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at 3000 [size=64] Capabilities: <access denied> Kernel driver in use: e100 02:0b.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection [8086:4220] (rev 05) Subsystem: Intel Corporation Device [8086:2753] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (750ns min, 6000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at e0206000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ipw2200 ** USB devices: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-4-686 (SMP w/1 CPU core) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.32-4-686 depends on: ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs ii linux-base 2.6.32-10 Linux image base package ii module-init-tools 3.12~pre2-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-4-686 recommends: ii firmware-linux-free 2.6.32-10 Binary firmware for various driver ii libc6-i686 2.10.2-6 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.32-4-686 suggests: ii grub-legacy [grub] 0.97-59 GRand Unified Bootloader (Legacy v ii linux-doc-2.6.32 2.6.32-10 Linux kernel specific documentatio Versions of packages linux-image-2.6.32-4-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) ii firmware-ipw2x00 0.23 Binary firmware for Intel Pro Wire pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.23 Binary firmware for various driver ii firmware-linux-nonfree 0.23 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) -- debconf information: linux-image-2.6.32-4-686/prerm/would-invalidate-boot-loader-2.6.32-4-686: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.32-4-686/postinst/bootloader-test-error-2.6.32-4-686: linux-image-2.6.32-4-686/postinst/depmod-error-initrd-2.6.32-4-686: false linux-image-2.6.32-4-686/postinst/bootloader-error-2.6.32-4-686: linux-image-2.6.32-4-686/postinst/missing-firmware-2.6.32-4-686: linux-image-2.6.32-4-686/prerm/removing-running-kernel-2.6.32-4-686: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
