Hi, >Do you still own such a system? If so, could you try a daily build of >the Squeeze d-i?
With the daily from the 19.2. (yesterday) and a command line: 0 > boot net 192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58 console=ttyS0,9600 console=tty0 I'm getting this boot log on the serial console: -----------------snip-------------------------------- LOAD: Waiting 60 seconds for Spanning Tree BOOTP R = 1 BOOTP S = 1 FILE: vmlinuz-chrp.initrd Load Addr=0x4000 Max Size=0x1ffc000 FINAL Packet Count = 14466 Final File Size = 7406588 bytes. zImage starting: loaded at 0x00400000 (sp: 0x022fffa0) Allocating 0x52a994 bytes for kernel ... OF version = 'IBM,TCP04195' Trying to claim from 0x400000 to 0xb0c000 (0x70c000) got 00400000 gunzipping (0x00c00000 <- 0x00407000:0x0061e479)...done 0x4b4000 bytes Attached initrd image at 0x0061f000-0x00aff5cc initrd head: 0x1f8b0808 Linux/PowerPC load: 192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58 console=ttyS0,9600 console=tty0 Finalizing device tree... using OF tree (promptr=0201a078) OF stdout device is: /p...@80000000/i...@b/ser...@i3f8 Preparing to boot Linux version 2.6.30-2-powerpc (Debian 2.6.30-8) (wa...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-4) ) #1 Sat Oct 3 22:43:22 UTC 2009 command line: 192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58 console=ttyS0,9600 console=tty0 memory layout at init: alloc_bottom : 0112f000 alloc_top : 20000000 alloc_top_hi : 20000000 rmo_top : 20000000 ram_top : 20000000 found display : /p...@80000000/disp...@16, opening... done instantiating rtas at 0x1ffe5000... done copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x01130000 -> 0x01130d7a Device tree struct 0x01131000 -> 0x01135000 Calling quiesce... returning from prom_init [ 0.000000] Using CHRP machine description [ 0.000000] Total memory = 512MB; using 1024kB for hash table (at cff00000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-2-powerpc (Debian 2.6.30-8) (wa...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-4) ) #1 Sat Oct 3 22:43:22 UTC 2009 [ 0.000000] Found initrd at 0xc061f000:0xc0aff5cc [ 0.000000] console [udbg0] enabled [ 0.000000] chrp type = 5 [IBM or Longtrail] [ 0.000000] PCI buses 0..1 controlled by /p...@80000000 at 80000000 [ 0.000000] PCI host bridge /p...@80000000 (primary) ranges: [ 0.000000] IO 0x00000000fe000000..0x00000000febfffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000 [ 0.000000] MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000 [ 0.000000] Removing ISA hole at 0x00000000fd000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00020000 [ 0.000000] Normal 0x00020000 -> 0x00020000 [ 0.000000] HighMem 0x00020000 -> 0x00020000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00020000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: 192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58 console=ttyS0,9600 console=tty0 [ 0.000000] Unknown boot option `192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58': ignoring [ 0.000000] NR_IRQS:512 [ 0.000000] OpenPIC at f9e80000 [ 0.000000] OpenPIC irqs 0..15 in IDU [ 0.000000] mpic: Setting up MPIC " MPIC " version 1.0 at f9e80000, max 4 CPUs [ 0.000000] mpic: ISU size: 16, shift: 4, mask: f [ 0.000000] mpic: Initializing for 16 sources [ 0.000000] i8259 legacy interrupt controller initialized [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] clocksource: timebase mult[c07ce5d] shift[22] registered [ 206.758539] Console: colour dummy device 80x25 [ 206.811750] console handover: boot [udbg0] -> real [tty0] -----------------snip-------------------------------- Which looks *far* better than before. Another try: -----------------snip-------------------------------- 0 > boot net 192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58 console=ttyS0,9600 console=udbg0 LOAD: Waiting 60 seconds for Spanning Tree BOOTP R = 1 BOOTP S = 1 FILE: vmlinuz-chrp.initrd Load Addr=0x4000 Max Size=0x1ffc000 FINAL Packet Count = 14466 Final File Size = 7406588 bytes. zImage starting: loaded at 0x00400000 (sp: 0x022fffa0) Allocating 0x52a994 bytes for kernel ... OF version = 'IBM,TCP04195' Trying to claim from 0x400000 to 0xb0c000 (0x70c000) got 00400000 gunzipping (0x00c00000 <- 0x00407000:0x0061e479)...done 0x4b4000 bytes Attached initrd image at 0x0061f000-0x00aff5cc initrd head: 0x1f8b0808 Linux/PowerPC load: 192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58 console=ttyS0,9600 console=udbg0 Finalizing device tree... using OF tree (promptr=0201a078) OF stdout device is: /p...@80000000/i...@b/ser...@i3f8 Preparing to boot Linux version 2.6.30-2-powerpc (Debian 2.6.30-8) (wa...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-4) ) #1 Sat Oct 3 22:43:22 UTC 2009 command line: 192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58 console=ttyS0,9600 console=udbg0 memory layout at init: alloc_bottom : 0112f000 alloc_top : 20000000 alloc_top_hi : 20000000 rmo_top : 20000000 ram_top : 20000000 found display : /p...@80000000/disp...@16, opening... done instantiating rtas at 0x1ffe5000... done copying OF device tree... Building dt strings... Building dt structure... Device tree strings 0x01130000 -> 0x01130d7a Device tree struct 0x01131000 -> 0x01135000 Calling quiesce... returning from prom_init [ 0.000000] Using CHRP machine description [ 0.000000] Total memory = 512MB; using 1024kB for hash table (at cff00000) [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-2-powerpc (Debian 2.6.30-8) (wa...@debian.org) (gcc version 4.3.4 (Debian 4.3.4-4) ) #1 Sat Oct 3 22:43:22 UTC 2009 [ 0.000000] Found initrd at 0xc061f000:0xc0aff5cc [ 0.000000] console [udbg0] enabled [ 0.000000] chrp type = 5 [IBM or Longtrail] [ 0.000000] PCI buses 0..1 controlled by /p...@80000000 at 80000000 [ 0.000000] PCI host bridge /p...@80000000 (primary) ranges: [ 0.000000] IO 0x00000000fe000000..0x00000000febfffff -> 0x0000000000000000 [ 0.000000] MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000 [ 0.000000] MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000 [ 0.000000] Removing ISA hole at 0x00000000fd000000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00020000 [ 0.000000] Normal 0x00020000 -> 0x00020000 [ 0.000000] HighMem 0x00020000 -> 0x00020000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00020000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: 192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58 console=ttyS0,9600 console=udbg0 [ 0.000000] Unknown boot option `192.168.22.1,vmlinuz-chrp.initrd,192.168.22.58': ignoring [ 0.000000] NR_IRQS:512 [ 0.000000] OpenPIC at f9e80000 [ 0.000000] OpenPIC irqs 0..15 in IDU [ 0.000000] mpic: Setting up MPIC " MPIC " version 1.0 at f9e80000, max 4 CPUs [ 0.000000] mpic: ISU size: 16, shift: 4, mask: f [ 0.000000] mpic: Initializing for 16 sources [ 0.000000] i8259 legacy interrupt controller initialized [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] clocksource: timebase mult[c07ce53] shift[22] registered [ 206.758530] Console: colour dummy device 80x25 [ 206.815808] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 206.902205] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 207.086194] Memory: 507648k/524288k available (4556k kernel code, 15996k reserved, 216k data, 474k bss, 236k init) [ 207.209990] Kernel virtual memory layout: [ 207.257841] * 0xfffef000..0xfffff000 : fixmap [ 207.312978] * 0xff800000..0xffc00000 : highmem PTEs [ 207.374356] * 0xfebf3000..0xff800000 : early ioremap [ 207.436776] * 0xe1000000..0xfebf3000 : vmalloc & ioremap [ 207.503847] Calibrating delay loop... 41.47 BogoMIPS (lpj=82944) [ 207.655911] Security Framework initialized [ 207.704900] SELinux: Disabled at boot. [ 207.750811] Mount-cache hash table entries: 512 [ 207.805838] device-tree: Duplicate name in /cpus/PowerPC,6...@0, renamed to "l2-cache#1" [ 207.905981] Initializing cgroup subsys ns [ 207.953844] Initializing cgroup subsys cpuacct [ 208.006984] Initializing cgroup subsys devices [ 208.060039] Initializing cgroup subsys freezer [ 208.113094] Initializing cgroup subsys net_cls [ 208.169476] net_namespace: 1076 bytes [ 208.214396] regulator: core version 0.5 [ 208.260882] NET: Registered protocol family 16 [ 208.318609] CHRP nvram contains 32768 bytes [ 208.368663] RTAS Event Scan Rate: 1 (14750 jiffies) [ 208.427470] PCI: Probing PCI hardware [ 208.476843] pci 0000:00:17.0: PCI bridge, secondary bus 0000:01 [ 208.547665] pci 0000:00:17.0: IO window: disabled [ 208.606040] pci 0000:00:17.0: MEM window: disabled [ 208.665406] pci 0000:00:17.0: PREFETCH window: disabled [ 208.741303] bio: create slab <bio-0> at 0 [ 208.792336] usbcore: registered new interface driver usbfs [ 208.858945] usbcore: registered new interface driver hub [ 208.922938] usbcore: registered new device driver usb [ 208.989839] NET: Registered protocol family 2 [ 209.042450] IP route cache hash table entries: 16384 (order: 4, 65536 bytes) [ 209.128960] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 209.220997] TCP bind hash table entries: 65536 (order: 6, 262144 bytes) [ 209.302807] TCP: Hash tables configured (established 65536 bind 65536) [ 209.380875] TCP reno registered [ 209.419148] NET: Registered protocol family 1 [ 209.471751] Trying to unpack rootfs image as initramfs... [ 210.541836] Freeing initrd memory: 4993k freed [ 210.597071] Thermal assist unit not available [ 210.653789] audit: initializing netlink socket (disabled) [ 210.718577] type=2000 audit(3754.070:1): initialized [ 210.779337] VFS: Disk quotas dquot_6.5.2 [ 210.826394] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 210.904877] msgmni has been set to 1002 [ 210.953462] alg: No test for stdrng (krng) [ 211.002953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 211.091502] io scheduler noop registered [ 211.138365] io scheduler anticipatory registered [ 211.193499] io scheduler deadline registered [ 211.244520] io scheduler cfq registered (default) [ 211.305113] Using unsupported 1280x1024 display at f9e60000, depth=8, pitch=1 -----------------snip-------------------------------- To me, it seems that only the console handover fails. As you could see, I once tried the "kernel" name tty0 and the "system" name udbg0, but both failed. Should I try another naming scheme? Or is the problem that the kernel thinks the *whole* boot line is the kernel command line? Anyway, I think there's definitely progress being made here and only the last step is missing. What's your suggestion for the next try? CU, Uli -- Dipl. Inf. Ulrich Teichert|e-mail: ulrich.teich...@gmx.de | Listening to: Stormweg 24 |Pale Bride (The Von Bondies), Slip Away (Sedatives) 24539 Neumuenster, Germany|Sacred Decay (The Estranged), She's Lost Control -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
