Il giorno dom, 17/01/2010 alle 21.26 +0100, Didier 'OdyX' Raboud ha scritto: > > These lines seem to indicate the opposite :
I thought the same, but apparently something is going wrong. > After the plugging, do you get some /dev/ttyUSB* devices ? No. > If your answer to the question above is no, could you please modify > the file > /usr/share/usb_modeswitch/usb_modeswitch.tcl to put 1 at line 32 and > give me the > /var/log/usb_modeswitch file afterwards ? > > (Don't forget to revert the modification afterwards…) It's attached (probably I did plug-in and -out two times). Thanks Ciao, steko -- Stefano Costa http://www.iosa.it/ Open Archaeology
USB_ModeSwitch log from Sun Jan 17 21:42:51 CET 2010 raw args from udev: /2-5:1.1 Bus ID for device not given by udev. Trying to determine it from kernel name (2-5:1.1) ... ---------------- USB values from sysfs: manufacturer HUAWEI Technology product HUAWEI Mobile serial ---------------- SCSI dir exists: /sys/bus/usb/devices/2-5/2-5:1.1/host9/target9:0:0/9:0:0:0 SCSI values read ---------------- SCSI values from sysfs: vendor HUAWEI model SD Storage rev 2.31 ---------------- checking config: /etc/usb_modeswitch.d/12d1:1446.dpkg-old ! matched, now switching (running command: /usr/sbin/usb_modeswitch -I -W -c /etc/usb_modeswitch.d/12d1:1446.dpkg-old) verbose output of usb_modeswitch: -------------------------------- usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Found 005 usb_os_find_busses: Found 006 usb_os_find_busses: Found 003 usb_os_find_busses: Found 007 usb_os_find_busses: Found 004 usb_os_find_busses: Found 002 usb_os_find_busses: Found 001 usb_os_find_devices: Found 024 on 005 skipped 3 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors skipped 1 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors usb_os_find_devices: Found 001 on 005 error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 001 on 006 usb_os_find_devices: Found 001 on 003 usb_os_find_devices: Found 001 on 007 usb_os_find_devices: Found 002 on 004 usb_os_find_devices: Found 001 on 004 error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 017 on 002 usb_os_find_devices: Found 001 on 002 error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 003 on 001 skipping descriptor 0xB skipped 1 class/vendor specific endpoint descriptors skipped 5 class/vendor specific interface descriptors skipping descriptor 0x25 skipped 1 class/vendor specific endpoint descriptors skipped 9 class/vendor specific interface descriptors usb_os_find_devices: Found 001 on 001 error obtaining child information: Inappropriate ioctl for device Check that you have permissions to write to 002/017 and, if you don't, that you set up hotplug (http://linux-hotplug.sourceforge.net/) correctly. USB error: could not claim interface 0: Device or resource busy Reading config file: /etc/usb_modeswitch.d/12d1:1446.dpkg-old * usb_modeswitch: handle USB devices with multiple modes * Version 1.0.7 (C) Josua Dietze 2009 * Based on libusb 0.1.12 ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= not set TargetProduct= not set TargetClass= not set DetachStorageOnly=0 HuaweiMode=1 SierraMode=0 SonyMode=0 GCTMode=0 MessageEndpoint= not set MessageContent= not set NeedResponse=0 ResponseEndpoint= not set Interface=0x00 InquireDevice disabled Success check enabled, max. wait time 20 seconds Note: target parameter missing; success check limited Looking for default devices ... Found default devices (1) Accessing device 017 on bus 002 ... USB description data (for identification) ------------------------- Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: not provided ------------------------- Sending Huawei control message ... OK, Huawei control message sent Checking for mode switch (max. 20 times, once per second) ... Waiting for original device to vanish ... Original device can't be accessed anymore. Good. (For a better success check provide target IDs or class) Original device vanished after switching Mode switch most likely succeeded. Bye. ok:0000:0000 -------------------------------- (end of usb_modeswitch output) Now checking for new serial devices (driver bound?) ... no new serial devices found, check driver Trying to add ID to option driver still no new serial devices found All done, exiting USB_ModeSwitch log from Sun Jan 17 21:43:45 CET 2010 raw args from udev: /2-5:1.0 Bus ID for device not given by udev. Trying to determine it from kernel name (2-5:1.0) ... ---------------- USB values from sysfs: manufacturer HUAWEI Technology product HUAWEI Mobile serial ---------------- SCSI dir exists: /sys/bus/usb/devices/2-5/2-5:1.0/host10/target10:0:0/10:0:0:0 SCSI values read ---------------- SCSI values from sysfs: vendor HUAWEI model Mass Storage rev 2.31 ---------------- checking config: /etc/usb_modeswitch.d/12d1:1446.dpkg-old ! matched, now switching (running command: /usr/sbin/usb_modeswitch -I -W -c /etc/usb_modeswitch.d/12d1:1446.dpkg-old) verbose output of usb_modeswitch: -------------------------------- usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Found 005 usb_os_find_busses: Found 006 usb_os_find_busses: Found 003 usb_os_find_busses: Found 007 usb_os_find_busses: Found 004 usb_os_find_busses: Found 002 usb_os_find_busses: Found 001 usb_os_find_devices: Found 024 on 005 skipped 3 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors skipped 1 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors skipped 3 class/vendor specific interface descriptors usb_os_find_devices: Found 001 on 005 error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 001 on 006 usb_os_find_devices: Found 001 on 003 usb_os_find_devices: Found 001 on 007 usb_os_find_devices: Found 002 on 004 usb_os_find_devices: Found 001 on 004 error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 018 on 002 usb_os_find_devices: Found 001 on 002 error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 003 on 001 skipping descriptor 0xB skipped 1 class/vendor specific endpoint descriptors skipped 5 class/vendor specific interface descriptors skipping descriptor 0x25 skipped 1 class/vendor specific endpoint descriptors skipped 9 class/vendor specific interface descriptors usb_os_find_devices: Found 001 on 001 error obtaining child information: Inappropriate ioctl for device Check that you have permissions to write to 002/018 and, if you don't, that you set up hotplug (http://linux-hotplug.sourceforge.net/) correctly. USB error: could not claim interface 0: Device or resource busy Reading config file: /etc/usb_modeswitch.d/12d1:1446.dpkg-old * usb_modeswitch: handle USB devices with multiple modes * Version 1.0.7 (C) Josua Dietze 2009 * Based on libusb 0.1.12 ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= not set TargetProduct= not set TargetClass= not set DetachStorageOnly=0 HuaweiMode=1 SierraMode=0 SonyMode=0 GCTMode=0 MessageEndpoint= not set MessageContent= not set NeedResponse=0 ResponseEndpoint= not set Interface=0x00 InquireDevice disabled Success check enabled, max. wait time 20 seconds Note: target parameter missing; success check limited Looking for default devices ... Found default devices (1) Accessing device 018 on bus 002 ... USB description data (for identification) ------------------------- Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: not provided ------------------------- Sending Huawei control message ... OK, Huawei control message sent Checking for mode switch (max. 20 times, once per second) ... Waiting for original device to vanish ... Original device can't be accessed anymore. Good. (For a better success check provide target IDs or class) Original device vanished after switching Mode switch most likely succeeded. Bye. ok:0000:0000 -------------------------------- (end of usb_modeswitch output) Now checking for new serial devices (driver bound?) ... no new serial devices found, check driver Trying to add ID to option driver still no new serial devices found All done, exiting
signature.asc
Description: Questa è una parte del messaggio firmata digitalmente
