Package: firmware-ralink Version: 0.21 Severity: important I am trying to use a usb wifi-n device from linksys with chipset rt2870sta but with the firmware i am having this output in dmesg
[ 225.764045] usb 2-6: new high speed USB device using ehci_hcd and address 4 [ 225.923385] usb 2-6: New USB device found, idVendor=1737, idProduct=0071 [ 225.923394] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 225.923401] usb 2-6: Product: Dual-Band Wireless-N USB Network Adapter [ 225.923407] usb 2-6: Manufacturer: Cisco-Linksys LLC [ 225.923568] usb 2-6: configuration #1 chosen from 1 choice [ 225.926259] [ 225.926261] [ 225.926263] === pAd = f9cfa000, size = 566744 === [ 225.926266] [ 225.926271] <-- RTMPAllocAdapterBlock, Status=0 [ 230.650167] usb 2-6: firmware: requesting rt2870.bin [ 230.945110] # [ 230.977482] # [ 231.009103] # [ 231.040845] # [ 231.073094] # [ 231.105091] # [ 231.136086] # [ 231.168081] # [ 231.200078] # [ 231.232198] # [ 231.237183] RTUSB_VendorRequest failed(-110),TxFlags=0x0, ReqType=OUT, Req=0x2, Index=0x400 [ 231.237189] Request Value=0x0001! [ 231.238763] <-- RTMPAllocTxRxRingMemory, Status=0 [ 231.240443] -->RTUSBVenderReset [ 231.240568] <--RTUSBVenderReset [ 231.518173] --> Error 2 opening /etc/Wireless/RT2870STA/RT2870STA.dat [ 231.518181] 1. Phy Mode = 0 [ 231.518185] 2. Phy Mode = 0 [ 231.547410] RTMPSetPhyMode: channel is out of range, use first channel=1 [ 231.557280] 3. Phy Mode = 0 [ 231.570029] ERROR!!! H2M_MAILBOX still hold by MCU. command fail [ 231.583652] ERROR!!! H2M_MAILBOX still hold by MCU. command fail [ 231.596400] ERROR!!! H2M_MAILBOX still hold by MCU. command fail [ 231.609149] ERROR!!! H2M_MAILBOX still hold by MCU. command fail [ 231.610898] MCS Set = 00 00 00 00 00 [ 231.632896] ERROR!!! H2M_MAILBOX still hold by MCU. command fail [ 231.632907] <==== RTMPInitialize, Status=0 [ 231.634519] 0x1300 = 00073200 [ 234.238181] Bulk Out MLME Failed, Status=-2! And the wifi device doesn't work -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (200, 'testing'), (100, 'unstable'), (50, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.30-2-686 (SMP w/3 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash firmware-ralink depends on no packages. firmware-ralink recommends no packages. Versions of packages firmware-ralink suggests: ii initramfs-tools 0.93.4 tools for generating an initramfs ii linux-image-2.6.30-2-686 [lin 2.6.30-8 Linux 2.6.30 image on PPro/Celeron -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
