Package: libfile-slurp-perl
Version: 9999.12-2
Severity: important
User: [email protected]
Usertags: perl-5.10.1-transition
This package fails to build with newer versions of Test::Simple,
including the current version of libtest-simple-perl (0.94-1) and the
version bundled with Perl 5.10.1 (currently in experimental).
t/error...........# Looks like you planned 9 tests but ran 10.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 10
Failed 1/9 tests, 88.89% okay
t/handle..........Constant subroutine main::SEEK_SET redefined at t/handle.t
line 14.
Prototype mismatch: sub main::SEEK_SET () vs none at t/handle.t line 14.
# Looks like you planned 4 tests but ran 5.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 5
Failed 1/4 tests, 75.00% okay
t/inode...........ok
t/large...........# Looks like you planned 176 tests but ran 177.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 177
Failed 1/176 tests, 99.43% okay
Build log attached.
--
Niko Tyni [email protected]
I: Using pkgname logfile
Current time: Mon Sep 14 20:26:17 EEST 2009
pbuilder-time-stamp: 1252949177
Obtaining the cached apt archive contents
Installing the build-deps
-> Attempting to satisfy build-dependencies
-> Creating pbuilder-satisfydepends-dummy package
Package: pbuilder-satisfydepends-dummy
Version: 0.invalid.0
Architecture: amd64
Maintainer: Debian Pbuilder Team <[email protected]>
Description: Dummy package to satisfy dependencies with aptitude - created by
pbuilder
This package was created automatically by pbuilder and should
Depends: debhelper (>= 4.0.2), perl, libtest-pod-coverage-perl, libtest-pod-perl
dpkg-deb: building package `pbuilder-satisfydepends-dummy' in
`/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'.
Reading package lists...
Building dependency tree...
Reading state information...
aptitude is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Selecting previously deselected package pbuilder-satisfydepends-dummy.
(Reading database ... 10824 files and directories currently installed.)
Unpacking pbuilder-satisfydepends-dummy (from
.../pbuilder-satisfydepends-dummy.deb) ...
dpkg: dependency problems prevent configuration of
pbuilder-satisfydepends-dummy:
pbuilder-satisfydepends-dummy depends on debhelper (>= 4.0.2); however:
Package debhelper is not installed.
pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however:
Package libtest-pod-coverage-perl is not installed.
pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however:
Package libtest-pod-perl is not installed.
dpkg: error processing pbuilder-satisfydepends-dummy (--install):
dependency problems - leaving unconfigured
Errors were encountered while processing:
pbuilder-satisfydepends-dummy
Reading package lists...
Building dependency tree...
Reading state information...
Initializing package states...
Writing extended state information...
The following NEW packages will be installed:
bsdmainutils{a} debhelper{a} file{a} gettext{a} gettext-base{a}
groff-base{a} html2text{a} intltool-debian{a} libcroco3{a}
libdevel-symdump-perl{a} libglib2.0-0{a} libio-stringy-perl{a}
libmagic1{a} libpcre3{a} libpod-coverage-perl{a}
libtest-pod-coverage-perl{a} libtest-pod-perl{a} libxml2{a} man-db{a}
po-debconf{a}
The following partially installed packages will be configured:
pbuilder-satisfydepends-dummy
0 packages upgraded, 20 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/8796kB of archives. After unpacking 26.3MB will be used.
Writing extended state information...
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously deselected package libmagic1.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 10824 files and directories currently installed.)
Unpacking libmagic1 (from .../libmagic1_5.03-1_amd64.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../archives/file_5.03-1_amd64.deb) ...
Selecting previously deselected package html2text.
Unpacking html2text (from .../html2text_1.3.2a-14_amd64.deb) ...
Selecting previously deselected package libpcre3.
Unpacking libpcre3 (from .../libpcre3_7.8-2_amd64.deb) ...
Selecting previously deselected package libglib2.0-0.
Unpacking libglib2.0-0 (from .../libglib2.0-0_2.20.5-1_amd64.deb) ...
Selecting previously deselected package libxml2.
Unpacking libxml2 (from .../libxml2_2.7.4.dfsg-1_amd64.deb) ...
Selecting previously deselected package libcroco3.
Unpacking libcroco3 (from .../libcroco3_0.6.1-2_amd64.deb) ...
Selecting previously deselected package gettext-base.
Unpacking gettext-base (from .../gettext-base_0.17-8_amd64.deb) ...
Selecting previously deselected package gettext.
Unpacking gettext (from .../gettext_0.17-8_amd64.deb) ...
Selecting previously deselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb)
...
Selecting previously deselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.16_all.deb) ...
Selecting previously deselected package groff-base.
Unpacking groff-base (from .../groff-base_1.20.1-5_amd64.deb) ...
Selecting previously deselected package bsdmainutils.
Unpacking bsdmainutils (from .../bsdmainutils_6.1.11_amd64.deb) ...
Selecting previously deselected package man-db.
Unpacking man-db (from .../man-db_2.5.6-2_amd64.deb) ...
Selecting previously deselected package debhelper.
Unpacking debhelper (from .../debhelper_7.4.1_all.deb) ...
Selecting previously deselected package libdevel-symdump-perl.
Unpacking libdevel-symdump-perl (from .../libdevel-symdump-perl_2.08-2_all.deb)
...
Selecting previously deselected package libpod-coverage-perl.
Unpacking libpod-coverage-perl (from .../libpod-coverage-perl_0.20-1_all.deb)
...
Selecting previously deselected package libtest-pod-coverage-perl.
Unpacking libtest-pod-coverage-perl (from
.../libtest-pod-coverage-perl_1.08-3_all.deb) ...
Selecting previously deselected package libio-stringy-perl.
Unpacking libio-stringy-perl (from .../libio-stringy-perl_2.110-4_all.deb) ...
Selecting previously deselected package libtest-pod-perl.
Unpacking libtest-pod-perl (from .../libtest-pod-perl_1.40-1_all.deb) ...
Processing triggers for install-info ...
Setting up libmagic1 (5.03-1) ...
Setting up file (5.03-1) ...
Setting up html2text (1.3.2a-14) ...
Setting up libpcre3 (7.8-2) ...
Setting up libglib2.0-0 (2.20.5-1) ...
Setting up libxml2 (2.7.4.dfsg-1) ...
Setting up libcroco3 (0.6.1-2) ...
Setting up gettext-base (0.17-8) ...
Setting up gettext (0.17-8) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.16) ...
Setting up groff-base (1.20.1-5) ...
Setting up bsdmainutils (6.1.11) ...
update-alternatives: using /usr/bin/bsd-write to provide /usr/bin/write (write)
in auto mode.
Setting up man-db (2.5.6-2) ...
Building database of manual pages ...
Setting up debhelper (7.4.1) ...
Setting up libdevel-symdump-perl (2.08-2) ...
Setting up libpod-coverage-perl (0.20-1) ...
Setting up libtest-pod-coverage-perl (1.08-3) ...
Setting up libio-stringy-perl (2.110-4) ...
Setting up libtest-pod-perl (1.40-1) ...
Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ...
Reading package lists...
Building dependency tree...
Reading state information...
Reading extended state information...
Initializing package states...
Writing extended state information...
-> Finished parsing the build-deps
Reading package lists...
Building dependency tree...
Reading state information...
fakeroot is already the newest version.
The following NEW packages will be installed:
libtest-simple-perl
debconf: delaying package configuration, since apt-utils is not installed
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/122kB of archives.
After this operation, 348kB of additional disk space will be used.
Selecting previously deselected package libtest-simple-perl.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 12083 files and directories currently installed.)
Unpacking libtest-simple-perl (from .../libtest-simple-perl_0.94-1_all.deb) ...
Processing triggers for man-db ...
Setting up libtest-simple-perl (0.94-1) ...
Copying back the cached apt archive contents
Copying source file
-> copying [/home/niko/tmp/libfile-slurp-perl_9999.12-2.dsc]
-> copying [/home/niko/tmp/libfile-slurp-perl_9999.12.orig.tar.gz]
-> copying [/home/niko/tmp/libfile-slurp-perl_9999.12-2.diff.gz]
Extracting source
gpgv: keyblock resource `/tmp/buildd/.gnupg/trustedkeys.gpg': file open error
gpgv: Signature made Wed Jun 27 11:08:24 2007 UTC using DSA key ID 42BD645D
gpgv: Can't check signature: public key not found
dpkg-source: warning: failed to verify signature on
./libfile-slurp-perl_9999.12-2.dsc
dpkg-source: info: extracting libfile-slurp-perl in libfile-slurp-perl-9999.12
dpkg-source: info: unpacking libfile-slurp-perl_9999.12.orig.tar.gz
dpkg-source: info: applying libfile-slurp-perl_9999.12-2.diff.gz
-> Building the package
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value:
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package libfile-slurp-perl
dpkg-buildpackage: source version 9999.12-2
dpkg-buildpackage: source changed by Alexander Zangerl <[email protected]>
dpkg-buildpackage: host architecture amd64
fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-stamp
/usr/bin/make clean
make[1]: Entering directory `/tmp/buildd/libfile-slurp-perl-9999.12'
make[1]: *** No rule to make target `clean'. Stop.
make[1]: Leaving directory `/tmp/buildd/libfile-slurp-perl-9999.12'
make: [clean] Error 2 (ignored)
rm -f Makefile Makefile.old
dh_clean
dpkg-source -b libfile-slurp-perl-9999.12
dpkg-source: info: using source format `1.0'
dpkg-source: info: building libfile-slurp-perl using existing
libfile-slurp-perl_9999.12.orig.tar.gz
dpkg-source: info: building libfile-slurp-perl in
libfile-slurp-perl_9999.12-2.diff.gz
dpkg-source: info: building libfile-slurp-perl in
libfile-slurp-perl_9999.12-2.dsc
debian/rules build
dh_testdir
perl Makefile.PL INSTALLDIRS=vendor
Checking if your kit is complete...
Looks good
Writing Makefile for File::Slurp
dh_testdir
/usr/bin/make OPTIMIZE="-O2 -g -Wall"
make[1]: Entering directory `/tmp/buildd/libfile-slurp-perl-9999.12'
cp lib/File/Slurp.pm blib/lib/File/Slurp.pm
Manifying blib/man3/File::Slurp.3pm
make[1]: Leaving directory `/tmp/buildd/libfile-slurp-perl-9999.12'
touch build-stamp
fakeroot debian/rules binary
dh_testdir
/usr/bin/make OPTIMIZE="-O2 -g -Wall"
make[1]: Entering directory `/tmp/buildd/libfile-slurp-perl-9999.12'
Manifying blib/man3/File::Slurp.3pm
make[1]: Leaving directory `/tmp/buildd/libfile-slurp-perl-9999.12'
touch build-stamp
dh_testdir
dh_testroot
dh_clean
dh_installdirs
/usr/bin/make test
make[1]: Entering directory `/tmp/buildd/libfile-slurp-perl-9999.12'
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0,
'blib/lib', 'blib/arch')" t/*.t
t/append_null.....ok
t/data_list.......Constant subroutine main::SEEK_SET redefined at t/data_list.t
line 13.
Prototype mismatch: sub main::SEEK_SET () vs none at t/data_list.t line 13.
ok
t/data_scalar.....Constant subroutine main::SEEK_SET redefined at
t/data_scalar.t line 13.
Prototype mismatch: sub main::SEEK_SET () vs none at t/data_scalar.t line 13.
ok
t/error...........# Looks like you planned 9 tests but ran 10.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 10
Failed 1/9 tests, 88.89% okay
t/handle..........Constant subroutine main::SEEK_SET redefined at t/handle.t
line 14.
Prototype mismatch: sub main::SEEK_SET () vs none at t/handle.t line 14.
# Looks like you planned 4 tests but ran 5.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 5
Failed 1/4 tests, 75.00% okay
t/inode...........ok
t/large...........# Looks like you planned 176 tests but ran 177.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 177
Failed 1/176 tests, 99.43% okay
t/newline.........ok
t/no_clobber......ok
t/original........ok
t/paragraph.......# Looks like you planned 24 tests but ran 25.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 25
Failed 1/24 tests, 95.83% okay
t/pod.............ok
t/pod_coverage....ok
t/pseudo..........# Looks like you planned 1 test but ran 2.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 2
Failed 1/1 tests, 0.00% okay
t/read_dir........ok
t/slurp...........ok
t/stdin...........ok
t/utf8............ok
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/error.t 255 65280 9 1 10
t/handle.t 255 65280 4 1 5
t/large.t 255 65280 176 1 177
t/paragraph.t 255 65280 24 1 25
t/pseudo.t 255 65280 1 1 2
Failed 5/18 test scripts. -5/256 subtests failed.
Files=18, Tests=256, 2 wallclock secs ( 2.21 cusr + 0.37 csys = 2.58 CPU)
Failed 5/18 test programs. -5/256 subtests failed.
make[1]: *** [test_dynamic] Error 255
make[1]: Leaving directory `/tmp/buildd/libfile-slurp-perl-9999.12'
make: *** [binary-indep] Error 2
dpkg-buildpackage: error: fakeroot debian/rules binary gave error exit status 2
pbuilder: Failed autobuilding of package
-> Aborting with an error
-> unmounting dev/pts filesystem
-> unmounting proc filesystem
