Package: linux-image-2.6.26-2-686 Version: 2.6.26-19 Followup-For: Bug #527250
-- Package-specific info: ** Version: Linux version 2.6.26-2-686 (Debian 2.6.26-19) ([email protected]) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC 2009 ** Command line: root=/dev/sda2 ro ** Tainted: G W (512) ** Kernel log: [ 36.819489] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 36.819666] [drm] Initialized i915 1.6.0 20060119 on minor 0 [ 47.154640] eth0: no IPv6 routers present [ 123.944629] ACPI: EC: missing confirmations, switch off interrupt mode. [ 124.465773] ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20080321] [ 124.465826] ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RCTP] (Node f7437658), AE_TIME [ 124.467923] ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.RTMP] (Node f743dd74), AE_TIME [ 124.468111] ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.TZ00._TMP] (Node f743dd24), AE_TIME [ 809.637903] usb 5-2: new high speed USB device using ehci_hcd and address 5 [ 809.774001] usb 5-2: configuration #1 chosen from 1 choice [ 809.775344] usb 5-2: New USB device found, idVendor=152d, idProduct=2336 [ 809.775374] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 809.775386] usb 5-2: Product: JM20336 SATA, USB Combo [ 809.775395] usb 5-2: Manufacturer: JMicron [ 809.775403] usb 5-2: SerialNumber: 808881C83110 [ 810.022659] Initializing USB Mass Storage driver... [ 810.022659] scsi4 : SCSI emulation for USB Mass Storage devices [ 810.022897] usb-storage: device found at 5 [ 810.022897] usb-storage: waiting for device to settle before scanning [ 810.022659] usbcore: registered new interface driver usb-storage [ 810.022659] USB Mass Storage support registered. [ 815.032818] usb-storage: device scan complete [ 815.040587] scsi 4:0:0:0: Direct-Access SAMSUNG S0MUJ1CP311002 CR10 PQ: 0 ANSI: 2 CCS [ 815.044787] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 815.045353] sd 4:0:0:0: [sdb] Write Protect is off [ 815.045353] sd 4:0:0:0: [sdb] Mode Sense: 00 38 00 00 [ 815.045353] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 815.045965] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 815.047041] sd 4:0:0:0: [sdb] Write Protect is off [ 815.047041] sd 4:0:0:0: [sdb] Mode Sense: 00 38 00 00 [ 815.047041] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 815.047041] sdb: sdb1 [ 815.097754] sd 4:0:0:0: [sdb] Attached SCSI disk [ 815.843628] kjournald starting. Commit interval 5 seconds [ 815.845890] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 815.846331] EXT3 FS on sdb1, internal journal [ 815.846331] EXT3-fs: recovery complete. [ 815.857416] EXT3-fs: mounted filesystem with ordered data mode. [ 3228.275752] usb 5-2: USB disconnect, address 5 [ 3228.279644] Buffer I/O error on device sdb1, logical block 23592962 [ 3228.279661] lost page write due to I/O error on sdb1 [ 3228.279684] Buffer I/O error on device sdb1, logical block 40730626 [ 3228.279695] lost page write due to I/O error on sdb1 [ 3228.279712] Buffer I/O error on device sdb1, logical block 63733762 [ 3228.279723] lost page write due to I/O error on sdb1 [ 3228.279739] Buffer I/O error on device sdb1, logical block 1027 [ 3228.279750] lost page write due to I/O error on sdb1 [ 3228.279828] Buffer I/O error on device sdb1, logical block 63733765 [ 3228.279840] lost page write due to I/O error on sdb1 [ 3228.279855] Buffer I/O error on device sdb1, logical block 63733766 [ 3228.279865] lost page write due to I/O error on sdb1 [ 3228.279879] Buffer I/O error on device sdb1, logical block 63733767 [ 3228.279889] lost page write due to I/O error on sdb1 [ 3228.279905] Buffer I/O error on device sdb1, logical block 63733772 [ 3228.279916] lost page write due to I/O error on sdb1 [ 3228.279932] Buffer I/O error on device sdb1, logical block 63733774 [ 3228.279943] lost page write due to I/O error on sdb1 [ 3228.279959] Buffer I/O error on device sdb1, logical block 63733777 [ 3228.279970] lost page write due to I/O error on sdb1 [ 3228.390046] ------------[ cut here ]------------ [ 3228.390046] WARNING: at fs/buffer.c:1186 mark_buffer_dirty+0x20/0x6a() [ 3228.390046] Modules linked in: usb_storage i915 drm appletalk rfcomm l2cap bluetooth ppdev parport_pc lp parport ipv6 acpi_cpufreq cpufreq_powersave cpufreq_conservative cpufreq_stats cpufreq_ondemand freq_table cpufreq_userspace nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm uvcvideo compat_ioctl32 videodev v4l1_compat serio_raw psmouse snd_seq_dummy rng_core pcspkr video output battery rt2860sta ac snd_seq_oss eeepc_laptop button snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device intel_agp snd agpgart soundcore snd_page_alloc evdev ext3 jbd mbcache ata_generic sd_mod usbhid hid ff_memless piix ahci ide_pci_generic libata ide_core scsi_mod dock ehci_hcd uhci_hcd usbcore atl1e thermal processor fan thermal_sys [last unloaded: scsi_wait_scan] [ 3228.390046] Pid: 3953, comm: umount Not tainted 2.6.26-2-686 #1 [ 3228.390046] [<c01225f3>] warn_on_slowpath+0x40/0x66 [ 3228.390046] [<c0136114>] getnstimeofday+0x37/0xbc [ 3228.390046] [<c013458a>] ktime_get_ts+0x22/0x49 [ 3228.390046] [<c0155070>] delayacct_end+0x70/0x77 [ 3228.390144] [<c0155145>] __delayacct_blkio_end+0x56/0x59 [ 3228.390180] [<c0131a2c>] finish_wait+0x27/0x48 [ 3228.390227] [<c02b8b83>] __wait_on_bit+0x50/0x58 [ 3228.390245] [<c0190946>] sync_buffer+0x0/0x33 [ 3228.390292] [<c0190946>] sync_buffer+0x0/0x33 [ 3228.390303] [<c02b8bea>] out_of_line_wait_on_bit+0x5f/0x67 [ 3228.390378] [<c01319c9>] wake_bit_function+0x0/0x3c [ 3228.390475] [<c019052f>] mark_buffer_dirty+0x20/0x6a [ 3228.390508] [<f8974c40>] journal_update_superblock+0x59/0x97 [jbd] [ 3228.390593] [<f8973b57>] cleanup_journal_tail+0xac/0xb1 [jbd] [ 3228.390655] [<f8973e3b>] log_do_checkpoint+0x2a8/0x2ee [jbd] [ 3228.390717] [<c0156858>] find_get_pages_tag+0x2a/0x6e [ 3228.390800] [<c0156858>] find_get_pages_tag+0x2a/0x6e [ 3228.390845] [<c0136114>] getnstimeofday+0x37/0xbc [ 3228.390942] [<c01dff88>] rb_insert_color+0x4c/0xad [ 3228.391008] [<c0133e56>] enqueue_hrtimer+0xc9/0xd4 [ 3228.391082] [<c013441e>] hrtimer_start+0xf7/0x110 [ 3228.393453] [<c011d43b>] hrtick_set+0x8f/0xd8 [ 3228.393524] [<c02b8810>] schedule+0x64e/0x66f [ 3228.393736] [<f8975710>] journal_destroy+0xc7/0x163 [jbd] [ 3228.393800] [<c013199c>] autoremove_wake_function+0x0/0x2d [ 3228.393886] [<f89abf35>] ext3_put_super+0x1f/0x16c [ext3] [ 3228.393977] [<c0175e75>] generic_shutdown_super+0x4f/0xc8 [ 3228.394001] [<c019f1e3>] vfs_quota_off+0x0/0x518 [ 3228.394012] [<c0175efa>] kill_block_super+0xc/0x1b [ 3228.394035] [<c0175f99>] deactivate_super+0x4b/0x60 [ 3228.394076] [<c0187098>] sys_umount+0x282/0x2c8 [ 3228.394100] [<c016a3af>] free_pages_and_swap_cache+0x6a/0x7e [ 3228.394249] [<c0115b8f>] do_page_fault+0x2a3/0x5c0 [ 3228.394409] [<c0103853>] sysenter_past_esp+0x78/0xb1 [ 3228.394522] [<c02b0000>] quirk_piix4_acpi+0x51/0x13c [ 3228.394631] ======================= [ 3228.394640] ---[ end trace 9c37576065d854b2 ]--- ** Loaded modules: Module Size Used by usb_storage 77120 0 i915 25280 2 drm 65288 3 i915 appletalk 26016 0 rfcomm 28272 0 l2cap 17248 5 rfcomm bluetooth 44996 4 rfcomm,l2cap ppdev 6468 0 parport_pc 22500 0 lp 8164 0 parport 30988 3 ppdev,parport_pc,lp ipv6 235396 20 acpi_cpufreq 6796 0 cpufreq_powersave 1856 0 cpufreq_conservative 5960 0 cpufreq_stats 3776 0 cpufreq_ondemand 6476 2 freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand cpufreq_userspace 3172 0 nfsd 186864 17 auth_rpcgss 33952 1 nfsd exportfs 3936 1 nfsd nfs 214216 1 lockd 54568 2 nfsd,nfs nfs_acl 2912 2 nfsd,nfs sunrpc 162528 17 nfsd,auth_rpcgss,nfs,lockd,nfs_acl snd_hda_intel 325688 1 snd_pcm_oss 32800 0 snd_mixer_oss 12320 1 snd_pcm_oss snd_pcm 62660 2 snd_hda_intel,snd_pcm_oss uvcvideo 45800 0 compat_ioctl32 1312 1 uvcvideo videodev 27520 1 uvcvideo v4l1_compat 12260 2 uvcvideo,videodev serio_raw 4740 0 psmouse 32336 0 snd_seq_dummy 2660 0 rng_core 3940 0 pcspkr 2432 0 video 16464 0 output 2912 1 video battery 10180 0 rt2860sta 442456 0 ac 4196 0 snd_seq_oss 24992 0 eeepc_laptop 7440 0 button 6096 0 snd_seq_midi 5728 0 snd_rawmidi 18496 1 snd_seq_midi snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 17800 2 snd_pcm,snd_seq snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq intel_agp 22524 1 snd 45636 11 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device agpgart 28808 3 drm,intel_agp soundcore 6368 1 snd snd_page_alloc 7816 2 snd_hda_intel,snd_pcm evdev 8000 7 ext3 105576 1 jbd 39476 1 ext3 mbcache 7108 1 ext3 ata_generic 4676 0 sd_mod 22200 3 usbhid 35904 0 hid 33184 1 usbhid ff_memless 4392 1 usbhid piix 6568 0 [permanent] ahci 23596 3 ide_pci_generic 3908 0 [permanent] libata 140448 2 ata_generic,ahci ide_core 96168 2 piix,ide_pci_generic scsi_mod 129548 3 usb_storage,sd_mod,libata dock 8304 1 libata ehci_hcd 28428 0 uhci_hcd 18672 0 usbcore 118192 6 usb_storage,uvcvideo,usbhid,ehci_hcd,uhci_hcd atl1e 27636 0 thermal 15228 0 processor 32576 4 acpi_cpufreq,thermal fan 4196 0 thermal_sys 10856 4 video,thermal,processor,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8340] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8340] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at dc00 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8340] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:834a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel modules: iTCO_wdt, intel-rng 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Kernel driver in use: PIIX_IDE Kernel modules: piix 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:830f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 220 Region 0: I/O ports at d080 [size=8] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at cc00 [size=8] Region 3: I/O ports at c880 [size=4] Region 4: I/O ports at c800 [size=16] Region 5: Memory at f7eb7800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci Kernel modules: ahci 01:00.0 Network controller [0280]: RaLink Device [1814:0781] Subsystem: RaLink Device [1814:2790] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2860 Kernel modules: rt2860sta 03:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1026] (rev b0) Subsystem: ASUSTeK Computer Inc. Device [1043:8324] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 219 Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] Region 2: I/O ports at ec00 [size=128] Capabilities: <access denied> Kernel driver in use: ATL1E Kernel modules: atl1e -- System Information: Debian Release: 5.0.3 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-2-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-2-686 depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-2-686 recommends: ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i Versions of packages linux-image-2.6.26-2-686 suggests: ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v pn linux-doc-2.6.26 <none> (no description available) -- debconf information: linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686: shared/kernel-image/really-run-bootloader: true linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686: linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686: linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk: linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/kimage-is-a-directory: linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
