I had similar problems as mentioned by other posters (see below for logs). After building sl-modem-daemon from source (version 2.9.11~20080817-4) I could connect to my ISP w/o any problems.
Here the log of my slmodemd with ALSA modem, which reports an error. With the SmartLink modem, I also got a segfault at the same place where the error occurs in the ALSA case. <235.687630> SmartLink Soft Modem: version 2.9.9e-pre1 Oct 5 2008 16:34:36 <235.703572> hw:1: startup modem... <235.703712> hw:1: update termios... symbolic link `/dev/ttySL0' -> `/dev/pts/0' created. modem `hw:1' created. TTY is `/dev/pts/0' <235.704648> open file: /var/lib/slmodem/data.hw:1... <235.704692> cannot open '/var/lib/slmodem/data.hw:1': No such file or directory <235.705937> main: rt applyed: SCHED_FIFO, pri 99 <235.706130> main: dropped privileges to 105.102 Use `/dev/ttySL0' as modem device, Ctrl+C for termination. <253.019144> main: termios changed. <253.019182> hw:1: update termios... <254.578883> hw:1: run cmd: ATZ <254.578910> hw:1: modem reset... <254.578924> hw:1: modem set state: 1 --> 1... <254.578942> hw:1: modem set mode: -> 0... <254.578957> hw:1: modem report result: 0 (OK) <270.853752> hw:1: run cmd: ATDT08000100093 <270.853798> hw:1: modem dial: T08000100093... <270.853815> hw:1: modem_dial_start... <270.853830> call: create... <270.853852> CallProgFP_Create >> <270.853867> APPLY_FILTER = 0 <270.853884> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96 <270.853899> ============> 0 <270.853913> Cadence: Busy Tone loose detection is 0 <270.853930> TYPE BUSY <270.853943> Filter index 0 <270.853956> Filter SubIndex 0 <270.853969> MAX_ON_TIME 30 Buffers MIN_ON_TIME 7 Buffers <270.853984> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 17 Buffers <270.853998> OFF_TIME_THAT_RESETS_CYCLE 90 <270.854012> BUFFER LENGTH 160 samples. <270.854025> INTEGRATION_LENGTH 0[ms] <270.854039> LEVEL 96 <270.854058> INTEGRATION_TIME = 0 Buffers. <270.854076> Detection Thresholds: levle_fix=43,--> LEVEL_THRESHOLD=96 <270.854092> TYPE DIAL <270.854105> Filter index 5 <270.854119> Filter SubIndex 0 <270.854131> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers <270.854145> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers <270.854160> OFF_TIME_THAT_RESETS_CYCLE 0 <270.854172> BUFFER LENGTH 666 samples. <270.854186> INTEGRATION_LENGTH 2500[ms] <270.854199> LEVEL 96 <270.854215> INTEGRATION_TIME = 28 Buffers. <270.854233> CALLPROG Create << <270.854247> CALLPROG Dialing T08000100093 <270.854263> Configuration->tone_DigitLength 100 <270.854277> Configuration->pulse_OffHookTime 41 <270.854290> Configuration->pulse_OnHookTime 60 <270.854304> Configuration->dialPauseTime 4 <270.854317> Configuration->flashTime 18 <270.854330> Configuration->toneOrPulseFlag 0 <270.854343> Configuration->dialModifierValidationFlag 1 <270.854357> Configuration->ABCD_PermittedFlag 0 <270.854370> Configuration->pulseAndToneInSameStringPermittedFlag 0 <270.872114> Configuration->callingToneFlag 0 <270.872134> Configuration->commaPauseDurLimit 30 <270.872148> Configuration->digitPattern 1 <270.872161> Configuration->tone_BetweenDigitsInterval 100 <270.872175> Configuration->pulse_BetweenDigitsInterval 800 <270.872189> DTMF_Gain1 = 10337 <270.872202> DTMF_Gain2 = 13014 <270.872217> AnalyzeDialString: Updated 17 May 1999 00:50 <270.872231> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 11 <270.872244> Dial String Syntax is VALID <270.872262> GetNoAnswerTimeOut. 60 <270.872277> WAIT DIAL TIMEOUT = 5 <270.872290> CALLPROG_Dial was exited. <270.872303> call: create RC: 9600 <-> 8000... <270.872323> hw:1: modem_start.. <270.872337> hw:1: modem set state: 1 --> 2... <270.872352> hw:1: new state: DP_ESTAB <270.872366> main: alsa_ioctl: cmd 8, arg 3... <270.872438> hw:1: modem set hook: 0 --> 1... <270.872457> main: alsa_ioctl: cmd 2, arg 1... <270.872496> main: alsa_ioctl: cmd 11, arg 0... <270.872643> main: alsa_ioctl: cmd 4, arg 2580... <270.872660> main: alsa_ioctl: cmd 7, arg 30... <270.872675> main: alsa_start... ALSA lib pcm_hw.c:875:(snd_pcm_hw_dump) cannot get card name ALSA lib pcm_hw.c:875:(snd_pcm_hw_dump) cannot get card name <270.873335> main: startup write: 576... <270.878478> call: process: msg 18 --> 0 <272.473439> DCR: initial DC Evaluation done, DC level 259, enabled <273.873481> tone detected by cadence dial <273.873513> STATE: CALLPROG_WAIT_DIAL --> CALLPROG_DIALING <273.873562> call: process: msg 0 --> 3 <273.878501> DIALER_INITIAL_STATE <273.878522> Digit is T <273.878537> Dialer.c: GetNextDigit... TONE_OR_PULSE_FLAG became TONE_DIALING <273.878550> Digit is 0 <273.878564> Samples left = 800 <273.878600> call: process: msg 3 --> 0 <273.958473> tone detected by cadence dial <273.973506> Done Generating digit <274.013501> CYCLES_COUNTER= 1 <274.073502> Done Generating silence between digits <274.073523> Digit is 8 <274.073537> Samples left = 800 <274.173508> Done Generating digit <274.273505> Done Generating silence between digits <274.273526> Digit is 0 <274.273541> Samples left = 800 <274.373511> Done Generating digit <274.473508> Done Generating silence between digits <274.473528> Digit is 0 <274.473542> Samples left = 800 <274.573513> Done Generating digit <274.673510> Done Generating silence between digits <274.673530> Digit is 0 <274.673544> Samples left = 800 <274.773516> Done Generating digit <274.873513> Done Generating silence between digits <274.873533> Digit is 1 <274.873547> Samples left = 800 <274.973519> Done Generating digit <275.073515> Done Generating silence between digits <275.073538> Digit is 0 <275.073551> Samples left = 800 <275.173521> Done Generating digit <275.273518> Done Generating silence between digits <275.273539> Digit is 0 <275.273554> Samples left = 800 <275.373524> Done Generating digit <275.473528> Done Generating silence between digits <275.473548> Digit is 0 <275.473562> Samples left = 800 <275.573531> Done Generating digit <275.673528> Done Generating silence between digits <275.673548> Digit is 9 <275.673562> Samples left = 800 <275.773529> Done Generating digit <275.873526> Done Generating silence between digits <275.873546> Digit is 3 <275.873560> Samples left = 800 <275.973531> Done Generating digit <275.978527> DIALER_END_STATE <275.978547> STATE: CALLPROG_DIALING --> CALLPROG_WAIT_RING <275.978578> call: process: msg 0 --> 4 <275.983540> call: process: msg 4 --> 0 <279.393561> CYCLES_COUNTER= 2 <282.103601> Found 2100 <282.103648> call: process: msg 0 --> 16 <282.103667> hw:1: 107760: change dp: --> 8... <282.103683> v8: create: caller 1, automode 0, dp id 92. <282.103702> V8: Create called, V8 version 23/09/03 . <282.103715> ############################################################ <282.103729> V8: local configuration : <282.103741> Side = Caller <282.103754> Operation Mode = 0 <282.103767> Modulations - V90=1, V34=1, V34HD=0, V32=1, V22=0, V17=0, V29=0, V27=0, V23=0, V21=0 <282.103786> v8bisIndication - 0 <282.103799> timeouts - signal detect 12 sec, message detect 7 sec <282.103849> quickConnectEnabled - 1 <282.103863> lapmIndication - 1 <282.103877> ucodeForQts - 9 <282.103889> ansPcmLevel - 0 <282.103902> ############################################################ <282.103924> V8: Initial CM message length is 9 octets <282.103941> call: delete... <282.103953> Dialer was aborted. <282.103966> CALLPROG_Delete is entered <282.103979> cadence_delete with CADENCE_DIAL_OBJ is invoked <282.103997> cadence_delete with CADENCE_OBJ is invoked <282.104012> CALLPROG_Delete is exited <282.108624> V8: State changed from V8_INIT to V8_ORG_WAITING_FOR_ANSAM <282.108647> v8: status (6) V8_ORG_WAITING_FOR_ANSAM <282.188617> V8: State changed from V8_ORG_WAITING_FOR_ANSAM to V8_ORG_ANSAM_DETECTED_WAITING_TE <282.188640> v8: status (7) V8_ORG_ANSAM_DETECTED_WAITING_TE <282.843611> ANSAM phase reversals detected delay = 449 <282.843634> ANSAM phase reversals detected delay = 449 <283.188604> V8 ANSAM Detected (CM ready) <283.188676> V8: State changed from V8_ORG_ANSAM_DETECTED_WAITING_TE to V8_ORG_SEND_QC <283.188692> v8: status (14) V8_ORG_SEND_QC <283.388676> V8: State changed from V8_ORG_SEND_QC to V8_ORG_SEND_CM <283.388700> v8: status (8) V8_ORG_SEND_CM <283.778654> V8: QCA1d: Got Good QCA1d !!!! <283.778676> V8: QCA1d: ANSpcm level index: bits27-28 = 1, bits57-58 = 1 <283.778694> V8: State changed from V8_ORG_SEND_CM to V8_OK <283.778709> v8: process: OK. <283.778722> V8Report: Finished with Quick Connect <283.778735> v8: process: QC. <283.778748> main: alsa_ioctl: cmd 10, arg 0... <283.778763> main: delay = 616 <283.778777> v8: Link established. Idle timer 1288. <283.778790> v8: status (13) V8_OK <283.778804> hw:1: 123840: change dp: --> 92... <283.778820> vpcm: create: dp 92, caller 1, frag 48 (size 53848). <283.778850> err: hw:1: change dp -> 92 error. <283.778867> hw:1: modem_hup... <283.778881> hw:1: modem set state: 2 --> 9... <283.778896> hw:1: new state: DP_DISC <283.778910> hw:1: modem_stop.. <283.778924> main: alsa_stop... <283.778981> hw:1: modem set hook: 1 --> 0... <283.779028> main: alsa_ioctl: cmd 2, arg 0... <283.779067> main: alsa_ioctl: cmd 8, arg 0... <283.779124> v8: delete... <283.779141> hw:1: modem set state: 9 --> 1... <283.779156> hw:1: new state: MODEM_IDLE <283.779170> hw:1: modem report result: 3 (NO CARRIER) <283.779202> main: dev write = 0 <290.908131> main: termios changed. <290.908171> hw:1: update termios... <290.908191> main: pty closed. <299.780580> main: signal 2: mark termination. <299.780632> hw:1: modem_delete... Der E-Mail-Dienst PIA basic belegt im Test der Stiftung Warentest unter den kostenfreien Angeboten mit dem Qualitätsurteil 3,0 den zweiten Platz! (Testheft Juli 2009, Artikel "E-Mail-Dienste - Besser gratis") JETZT TESTEN: www.arcor.de/rd/pia_sw -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
