Package: linux-image-2.6.30-1-686
Version: 2.6.30-1
Severity: normal
Hi,
starting with 2.6.30, the b43 driver is autoloaded for the bcm4312 with
LP-PHY, identified by PCI Product ID 0x4315; the driver then complains that
the device is unsupported.
This shadows the declaration by the non-free broadcom-sta driver, so this
driver is no longer autoloaded, and I have to explicitly load it in order
to allow my WLAN to work.
Simon
-- Package-specific info:
** Version:
Linux version 2.6.30-1-686 (Debian 2.6.30-1) (wa...@debian.org) (gcc version
4.3.3 (Debian 4.3.3-11) ) #1 SMP Sun Jun 14 16:11:32 UTC 2009
** Command line:
root=/dev/hda1 ro quiet
** Tainted: P (1)
** Kernel log:
[ 4.218116] hda: 15005088 sectors (7682 MB), CHS=14886/16/63
[ 4.218126] hda: cache flushes not supported
[ 4.218238] hda: hda1
[ 4.344926] kjournald starting. Commit interval 5 seconds
[ 4.344936] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.862891] udev: starting version 141
[ 8.408721] Linux agpgart interface v0.103
[ 8.645499] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 8.645980] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 8.648672] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 8.949496] jmb38x_ms 0000:02:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ
16
[ 8.949515] jmb38x_ms 0000:02:00.3: setting latency timer to 64
[ 8.966501] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 9.069230] intel_rng: FWH not detected
[ 9.112179] Bluetooth: Core ver 2.15
[ 9.196650] cfg80211: Using static regulatory domain info
[ 9.196658] cfg80211: Regulatory domain: US
[ 9.196664] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 9.196673] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 9.196683] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.196691] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.196699] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.196708] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 9.196717] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 9.196741] cfg80211: Calling CRDA for country: US
[ 9.212619] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ
19
[ 9.472141] NET: Registered protocol family 31
[ 9.472148] Bluetooth: HCI device and connection manager initialized
[ 9.472157] Bluetooth: HCI socket layer initialized
[ 9.537164] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 9.537361] usbcore: registered new interface driver btusb
[ 9.627556] Linux video capture interface: v2.00
[ 9.736764] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 10.013632] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 10.042908] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_0.3M
(064e:a102)
[ 10.180922] input: Laptop_Integrated_Webcam_0.3M as
/devices/pci0000:00/0000:00:1d.7/usb5/5-2/5-2:1.0/input/input2
[ 10.181076] usbcore: registered new interface driver uvcvideo
[ 10.181096] USB Video Class driver (v0.1.0)
[ 10.344469] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 6, Type 5,
Revision 1)
[ 10.344829] b43: probe of ssb0:0 failed with error -95
[ 10.344888] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 10.441923] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps:
0xd04711/0xa00000
[ 10.528221] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input3
[ 11.695767] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 11.695867] ACPI: Power Button [PWRF]
[ 11.696063] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 11.697719] ACPI: Lid Switch [LID0]
[ 11.697945] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 11.698046] ACPI: Power Button [PWRB]
[ 11.698234] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
[ 11.698311] ACPI: Sleep Button [SLPB]
[ 11.709224] ACPI: AC Adapter [ACAD] (off-line)
[ 11.723911] ACPI: SSDT 3f6dcc32 00245 (v02 PmRef Cpu0Ist 00003000 INTL
20050624)
[ 11.724771] ACPI: SSDT 3f6dc5c8 005E5 (v02 PmRef Cpu0Cst 00003001 INTL
20050624)
[ 11.726013] Monitor-Mwait will be used to enter C-1 state
[ 11.812052] Monitor-Mwait will be used to enter C-2 state
[ 11.829048] Monitor-Mwait will be used to enter C-3 state
[ 11.829091] Marking TSC unstable due to TSC halts in idle
[ 11.829280] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 11.829382] processor ACPI_CPU:00: registered as cooling_device0
[ 11.829398] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 11.830370] ACPI: SSDT 3f6dce77 000D4 (v02 PmRef Cpu1Ist 00003000 INTL
20050624)
[ 11.831111] ACPI: SSDT 3f6dcbad 00085 (v02 PmRef Cpu1Cst 00003000 INTL
20050624)
[ 11.866151] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 11.866246] processor ACPI_CPU:01: registered as cooling_device1
[ 11.866261] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 11.888468] ACPI: Battery Slot [BAT1] (battery present)
[ 12.005482] acpi device:02: registered as cooling_device2
[ 12.006034] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input8
[ 12.006160] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.316465] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 13.316565] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.648519] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input9
[ 14.602895] EXT3 FS on hda1, internal journal
[ 15.720784] loop: module loaded
[ 17.342634] r8169: eth0: link down
[ 17.343249] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.993097] Bluetooth: L2CAP ver 2.13
[ 19.993104] Bluetooth: L2CAP socket layer initialized
[ 20.138219] Bluetooth: RFCOMM socket layer initialized
[ 20.138259] Bluetooth: RFCOMM TTY layer initialized
[ 20.138272] Bluetooth: RFCOMM ver 1.11
[ 31.998063] lib80211: common routines for IEEE802.11 drivers
[ 31.998080] lib80211_crypt: registered algorithm 'NULL'
[ 32.065531] b43-pci-bridge 0000:03:00.0: PCI INT A disabled
[ 32.304535] wl: module license 'MIXED/Proprietary' taints kernel.
[ 32.304543] Disabling lock debugging due to kernel taint
[ 32.309523] wl 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 32.309551] wl 0000:03:00.0: setting latency timer to 64
[ 32.326537] eth1 (wl): not using net_device_ops yet
[ 32.368855] lib80211_crypt: registered algorithm 'TKIP'
[ 32.371446] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9
[ 43.548034] eth1: no IPv6 routers present
[ 81.013736] [drm] Initialized drm 1.1.0 20060810
[ 81.040450] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 81.040460] pci 0000:00:02.0: setting latency timer to 64
[ 81.043340] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 486.405243] TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=f645b240
[ 611.433003] TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=f645b240
[ 736.358360] TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=f645b240
** Loaded modules:
Module Size Used by
i915 147532 2
drm 137780 3 i915
i2c_algo_bit 4868 1 i915
michael_mic 2104 4
arc4 1560 2
ecb 2368 2
lib80211_crypt_tkip 7896 0
wl 1267080 0
lib80211 6048 2 lib80211_crypt_tkip,wl
rfcomm 30236 1
l2cap 18104 5 rfcomm
acpi_cpufreq 7608 0
cpufreq_conservative 6256 0
cpufreq_stats 3520 0
cpufreq_powersave 1292 0
cpufreq_userspace 2768 0
loop 13316 0
snd_hda_codec_realtek 178316 1
snd_hda_intel 22192 0
snd_hda_codec 63520 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 6104 1 snd_hda_codec
snd_pcm_oss 32232 0
snd_mixer_oss 12368 1 snd_pcm_oss
snd_pcm 62364 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 5688 0
joydev 8576 0
snd_rawmidi 18580 1 snd_seq_midi
snd_seq_midi_event 6212 1 snd_seq_midi
snd_seq 42436 2 snd_seq_midi,snd_seq_midi_event
video 17980 1 i915
output 2604 1 video
battery 6012 0
processor 34476 3 acpi_cpufreq
button 5060 0
ac 2960 0
snd_timer 17436 2 snd_pcm,snd_seq
snd_seq_device 6136 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 49040 11
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
serio_raw 4556 0
uvcvideo 49296 0
dell_laptop 3164 0
evdev 8028 5
rfkill 9668 1 dell_laptop
dcdbas 6732 1 dell_laptop
videodev 31040 1 uvcvideo
v4l1_compat 11416 2 uvcvideo,videodev
btusb 10276 2
psmouse 37528 0
soundcore 6184 1 snd
i2c_i801 8580 0
snd_page_alloc 8180 2 snd_hda_intel,snd_pcm
bluetooth 46924 7 rfcomm,l2cap,btusb
i2c_core 20840 4 i915,drm,i2c_algo_bit,i2c_i801
pcspkr 2104 0
jmb38x_ms 7876 0
memstick 8948 1 jmb38x_ms
intel_agp 22908 1
agpgart 30788 3 drm,intel_agp
ext3 107180 1
jbd 41040 1 ext3
mbcache 6924 1 ext3
ide_gd_mod 19852 2
piix 5680 1
ide_pci_generic 3632 0
ide_core 88100 3 ide_gd_mod,piix,ide_pci_generic
ata_generic 4340 0
mmc_block 9036 0
libata 150624 1 ata_generic
ehci_hcd 29660 0
uhci_hcd 19140 0
sdhci_pci 6540 0
sdhci 14848 1 sdhci_pci
r8169 27740 0
mii 4664 1 r8169
mmc_core 46272 2 mmc_block,sdhci
led_class 3852 1 sdhci
usbcore 125872 5 uvcvideo,btusb,ehci_hcd,uhci_hcd
scsi_mod 131604 1 libata
thermal 12572 0
fan 4040 0
thermal_sys 13128 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory
Controller Hub [8086:27ac] (rev 03)
Subsystem: Dell Device [1028:02b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME
Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA
controller])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0300000 (32-bit, non-prefetchable) [size=256K]
Capabilities: <access denied>
Kernel modules: intelfb
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME,
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Dell Device [1028:02b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f0540000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f0100000-f01fffff
Prefetchable memory behind bridge: 0000000050000000-00000000500fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 50100000-501fffff
Prefetchable memory behind bridge: 00000000f0600000-00000000f06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f0544000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-rng, iTCO_wdt
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 02)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
02:00.0 System peripheral [0880]: JMicron Technologies, Inc. Device [197b:2382]
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 50000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
02:00.2 SD Host controller [0805]: JMicron Technologies, Inc. Device
[197b:2381] (prog-if 01)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel modules: sdhci-pci
02:00.3 System peripheral [0880]: JMicron Technologies, Inc. Device [197b:2383]
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: jmb38x_ms
Kernel modules: jmb38x_ms
03:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g
[14e4:4315] (rev 01)
Subsystem: Broadcom Corporation Device [14e4:04b5]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
Kernel modules: ssb, wl
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Dell Device [1028:02b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0610000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0600000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f0620000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
-- System Information:
Debian Release: 5.0.2
APT prefers stable
APT policy: (990, 'stable'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-1-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-1-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.30-1-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.30-1-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
