CAN'T TRANSFERS!
maxim...@maximiliano:~$ obex-data-server --no-daemon
** Message: obex-data-server 0.4.4
** Message: Using Session bus
maxim...@maximiliano:~$ sudo hcidump
[sudo] password for maximi89:
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Role Change (0x12) plen 8
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> HCI Event: Remote Name Req Complete (0x07) plen 255
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 0
Connection pending - No futher information available
< ACL data: handle 1 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
< ACL data: handle 1 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 1024
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 1 flags 0x02 dlen 34
L2CAP(d): cid 0x0040 len 30 [psm 1]
SDP SSA Req: tid 0x1 len 0x19
pat uuid-16 0x1105 (OBEXObjPush)
max 128
aid(s) 0x0000 (SrvRecHndl) 0x0001 (SrvClassIDList) 0x0002
(SrvRecState) 0x0006 (LangBaseAttrIDList) 0x0009 (BTProfileDescList)
cont 00
< ACL data: handle 1 flags 0x02 dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x5
count 2
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Disconn Complete (0x05) plen 4
THIS TRANSFERS!
maxim...@maximiliano:~$ gnome-obex-server
conn_request: bdaddr 00:1A:1B:96:93:22
conn_complete: status 0x00
** Message: Incoming connection from 00:1A:1B:96:93:22
** Message: Device 00:1A:1B:96:93:22 is about to send an object.
** Message: Link error
maxim...@maximiliano:~$ sudo hcidump
HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Role Change (0x12) plen 8
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 0
Connection pending - No futher information available
< ACL data: handle 1 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Remote Name Req Complete (0x07) plen 255
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
< ACL data: handle 1 flags 0x02 dlen 18
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
MTU 1024
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 1 flags 0x02 dlen 34
L2CAP(d): cid 0x0040 len 30 [psm 1]
SDP SSA Req: tid 0x1 len 0x19
pat uuid-16 0x1105 (OBEXObjPush)
max 128
aid(s) 0x0000 (SrvRecHndl) 0x0001 (SrvClassIDList) 0x0002
(SrvRecState) 0x0006 (LangBaseAttrIDList) 0x0009
(BTProfileDescList)
cont
00
< ACL data: handle 1 flags 0x02 dlen
45
L2CAP(d): cid 0x0040 len 41 [psm
1]
SDP SSA Rsp: tid 0x1 len
0x24
count
33
record
#0
aid 0x0000
(SrvRecHndl)
uint
0x10008
aid 0x0001
(SrvClassIDList)
< uuid-16 0x1105 (OBEXObjPush)
>
aid 0x0009
(BTProfileDescList)
< < uuid-16 0x1105 (OBEXObjPush) uint 0x100 >
>
cont
00
> HCI Event: Number of Completed Packets (0x13) plen
5
> ACL data: handle 1 flags 0x02 dlen
21
L2CAP(d): cid 0x0040 len 17 [psm
1]
SDP SA Req: tid 0x149 len
0xc
handle
0x10008
max
128
aid(s) 0x0004
(ProtocolDescList)
cont
00
< ACL data: handle 1 flags 0x02 dlen
36
L2CAP(d): cid 0x0040 len 32 [psm
1]
SDP SA Rsp: tid 0x149 len
0x1b
count
24
aid 0x0004
(ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) >
<
uuid-16 0x0003 (RFCOMM) uint 0x4 >
<
uuid-16 0x0008 (OBEX) >
>
cont
00
> HCI Event: Number of Completed Packets (0x13) plen
5
> ACL data: handle 1 flags 0x02 dlen
12
L2CAP(s): Connect req: psm 3 scid
0x0041
< ACL data: handle 1 flags 0x02 dlen
16
L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status
0
Connection
successful
> HCI Event: Number of Completed Packets (0x13) plen
5
> ACL data: handle 1 flags 0x02 dlen
16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen
4
MTU
2053
< ACL data: handle 1 flags 0x02 dlen
18
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen
4
MTU
2053
< ACL data: handle 1 flags 0x02 dlen
16
L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen
4
MTU
1013
> HCI Event: Number of Completed Packets (0x13) plen
5
> HCI Event: Number of Completed Packets (0x13) plen
5
> ACL data: handle 1 flags 0x02 dlen
18
L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen
4
MTU
1013
> ACL data: handle 1 flags 0x02 dlen
8
L2CAP(d): cid 0x0041 len 4 [psm
3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs
0x1c
< ACL data: handle 1 flags 0x02 dlen
8
L2CAP(d): cid 0x0041 len 4 [psm
3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs
0xd7
> HCI Event: Number of Completed Packets (0x13) plen
5
> ACL data: handle 1 flags 0x02 dlen
18
L2CAP(d): cid 0x0041 len 14 [psm
3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len
8
dlci 8 frame_type 0 credit_flow 15 pri 0 ack_timer
0
frame_size 2048 max_retrans 0 credits
0
< ACL data: handle 1 flags 0x02 dlen
18
L2CAP(d): cid 0x0041 len 14 [psm
3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len
8
dlci 8 frame_type 0 credit_flow 14 pri 0 ack_timer
0
frame_size 1008 max_retrans 0 credits
7
> HCI Event: Number of Completed Packets (0x13) plen
5
> ACL data: handle 1 flags 0x02 dlen
8
L2CAP(d): cid 0x0041 len 4 [psm
3]
RFCOMM(s): SABM: cr 1 dlci 8 pf 1 ilen 0 fcs
0xc9
< ACL data: handle 1 flags 0x02 dlen
8
L2CAP(d): cid 0x0041 len 4 [psm
3]
RFCOMM(s): UA: cr 1 dlci 8 pf 1 ilen 0 fcs
0x2
< ACL data: handle 1 flags 0x02 dlen
12
L2CAP(d): cid 0x0041 len 8 [psm
3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len
2
dlci 8 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len
0
> HCI Event: Number of Completed Packets (0x13) plen
5
> HCI Event: Number of Completed Packets (0x13) plen
5
> ACL data: handle 1 flags 0x02 dlen
13
L2CAP(d): cid 0x0041 len 9 [psm
3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 5 fcs 0x70 mcc_len
3
dlci 8 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len
0
< ACL data: handle 1 flags 0x02 dlen
12
L2CAP(d): cid 0x0041 len 8 [psm
3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len
2
dlci 8 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 1 b3 0 len
0
> ACL data: handle 1 flags 0x02 dlen
12
L2CAP(d): cid 0x0041 len 8 [psm
3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len
2
dlci 8 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len
0
< ACL data: handle 1 flags 0x02 dlen
9
L2CAP(d): cid 0x0041 len 5 [psm
3]
RFCOMM(d): UIH: cr 0 dlci 8 pf 1 ilen 0 fcs 0x9c credits
33
> HCI Event: Number of Completed Packets (0x13) plen
5
> HCI Event: Number of Completed Packets (0x13) plen
5
> ACL data: handle 1 flags 0x02 dlen
16
L2CAP(d): cid 0x0041 len 12 [psm
3]
RFCOMM(d): UIH: cr 1 dlci 8 pf 1 ilen 7 fcs 0x46 credits
1
OBEX: Connect cmd(f): len 7 version 1.0 flags 0 mtu
5126
< HCI Command: Remote Name Request (0x01|0x0019) plen
10
< ACL data: handle 1 flags 0x02 dlen
15
L2CAP(d): cid 0x0041 len 11 [psm
3]
RFCOMM(d): UIH: cr 0 dlci 8 pf 0 ilen 7 fcs
0x80
OBEX: Connect rsp(f): status 200 len 7 version 1.0 flags 0 mtu
1024
> HCI Event: Command Status (0x0f) plen
4
> HCI Event: Number of Completed Packets (0x13) plen
5
> HCI Event: Remote Name Req Complete (0x07) plen
255
> ACL data: handle 1 flags 0x02 dlen
9
L2CAP(d): cid 0x0041 len 5 [psm
3]
RFCOMM(d): UIH: cr 1 dlci 8 pf 1 ilen 0 fcs 0x46 credits
1
> ACL data: handle 1 flags 0x02 dlen
92
L2CAP(d): cid 0x0041 len 88 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 8 pf 0 ilen 84 fcs 0x5a
OBEX: Put cmd(c): len 84
Type (0x42) = Sequence length 10
Name (0x01) = Unicode length 60
Length (0xc3) = 2688313
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 8 pf 1 ilen 0 fcs 0x28
< ACL data: handle 1 flags 0x02 dlen 8
L2CAP(d): cid 0x0041 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 8 pf 1 ilen 0 fcs 0x2
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0041 scid 0x0041
< ACL data: handle 1 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0041 scid 0x0041
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Disconn Complete (0x05) plen 4
this was the test receiving files from phone to computer, computer to phone
works fine.
--
Maximiliano Augusto Castañón Araneda
Santiago, Chile
Linux user # 394821
