Package: installation-reports Boot method: CD Image version: Self-made boot CD with Lenny Debian Installer 5.0.0 Date: 2009-02-23
Machine: Self-made Desktop PC Processor: AMD Duron 800MHz Memory: 256MB Partitions: <df -Tl will do; the raw partition table is preferred> > Dateisystem Typ 1K‐Blöcke Benutzt Verfügbar Ben% Eingehängt auf > /dev/hda1 ext3 1921156 635360 1188204 35% / > tmpfs tmpfs 128284 4 128280 1% /lib/init/rw > udev tmpfs 10240 84 10156 1% /dev > tmpfs tmpfs 128284 0 128284 0% /dev/shm > /dev/hda5 xfs 77443576 26133228 51310348 34% /storage1 > /dev/hdb5 xfs 244076732 160107184 83969548 66% /storage2 Output of lspci -knn: > 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 735 Host > [1039:0735] (rev 01) > Kernel driver in use: agpgart-sis > Kernel modules: sis-agp > 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual > PCI-to-PCI bridge (AGP) [1039:0001] > Kernel modules: shpchp > 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS85C503/5513 > (LPC Bridge) [1039:0018] > Kernel modules: i2c-sis630 > 00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus > Controller [1039:0016] > Kernel driver in use: sis96x_smbus > Kernel modules: i2c-sis96x > 00:02.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 > Controller [1039:7001] (rev 07) > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > 00:02.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 > Controller [1039:7001] (rev 07) > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] > [1039:5513] (rev d0) > Kernel driver in use: SIS_IDE > Kernel modules: sis5513 > 00:0f.0 Network controller [0280]: RaLink RT2500 802.11g Cardbus/mini-PCI > [1814:0201] (rev 01) > Kernel driver in use: rt2500pci > Kernel modules: rt2500pci > 00:11.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169 > Gigabit Ethernet [10ec:8169] (rev 10) > Kernel driver in use: r8169 > Kernel modules: r8169 > 00:13.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 50) > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00:13.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 > Controller [1106:3038] (rev 50) > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > 00:13.2 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] > (rev 51) > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128 RF/SG > AGP [1002:5246] > Kernel modules: aty128fb Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [E] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O] Comments/Problems: The used architecture is a K7 architecture (AMD Duron 800MHz). The kernel has to be the 686 image. But there is the 486 image installed. Regards Bernhard -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
