Package: hplip
Version: 2.8.6.b-1
Severity: normal
Hi, the Debian-created menu entry is for HP-Toolbox, yet if one attempts
to run HP-Toolbox from the menu entry, there is an error message that
hp-systray hasn't been started.
Shouldn't the menu enty be for HP-Systray? Once hp-systray is started,
it is only one mouse-click to start HP-Toolbox in a fully functional
state.
-- Package-specific info:
warning: Invalid ppd_dir value: None
error: SIP not installed or version not found.
note: For troubleshooting printing issues, it is best to have the CUPS
'LogLevel'
note: set to 'debug'. To set the LogLevel to debug, edit the file
/etc/cups/cupsd.conf (as root),
note: and change the line near the top of the file that begins with 'LogLevel'
to read:
note: LogLevel debug
note: Save the file and then restart CUPS (see your OS/distro docs on how to
restart CUPS).
note: Now, when you print, helpful debug information will be saved to the file:
note: /var/log/cups/error_log
note: You can monitor this file by running this command in a console/shell:
note: tail -f /var/log/cups/error_log
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
functionality may not function properly.
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
functionality may not function properly.
HP Linux Imaging and Printing System (ver. 2.8.6b)
Dependency/Version Check Utility ver. 14.0
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux victoria 2.6.27-rc5 #2 SMP PREEMPT Mon Sep 8 17:29:54 CST 2008 i686
GNU/Linux
Distribution:
debian 4.0r4a
HPOJ running?
No, HPOJ is not running (OK).
Checking Python version...
OK, version 2.5.2 installed
Checking PyQt version...
OK, version 3.17 installed.
Checking SIP version...
Checking for CUPS...
Status: scheduler is running
Version: 1.3.8
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
------------------------
| RUNTIME DEPENDENCIES |
------------------------
Checking for dependency: cups - Common Unix Printing System...
OK, found.
Checking for dependency: cups-ddk - CUPS driver development kit...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter
and previewer...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline
scanning with hp-scan)...
OK, found.
Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.
Checking for dependency: PyQt - Qt interface for Python...
OK, found.
Checking for dependency: python-ctypes - A foreign function library for
Python...
OK, found.
Checking for dependency: python-dbus - Python bindings for dbus...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax
functionality...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
Checking for dependency: xsane - Graphical scanner frontend for SANE...
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 2.8.6b currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=2.8.6b
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hpijs/HP
ppdbase=/usr/share/ppd/hpijs
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=2.8.6.20b
-------------------------------
| DISCOVERED PARALLEL DEVICES |
-------------------------------
No devices found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- ----------------------
hp:/usb/Officejet_Pro_K5300?seri HP Officejet Pro K5300
al=MY742380S7
--warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax:
CUPS backend to function in HPLIP.
error: Not found. SANE backend 'hpaio' NOT properly setup (needs to be added to
/etc/sane.d/dll.conf).
error: scanimage not found.
error: NOT FOUND OR FAILED TO LOAD! Please reinstall HPLIP and check for the
proper installation of scanext.
error: 7 errors and/or warnings.
-------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
CANON
-----
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: parallel:/dev/lp0
PPD: /etc/cups/ppd/CANON.ppd
PPD Description: Canon BJC-3000 - CUPS+Gutenprint v5.0.2
Printer status: printer CANON is idle. enabled since Sun 10 Aug 2008 13:55:34
CST
HP-K5300
--------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/Officejet_Pro_K5300?serial=MY742380S7
PPD: /etc/cups/ppd/HP-K5300.ppd
PPD Description: HP OfficeJet Pro K5300 Foomatic/hpijs, hpijs 2.8.5.23 - HPLIP
2.8.5
Printer status: printer HP-K5300 is idle. enabled since Sun 10 Aug 2008
13:50:32 CST
Communication status: Good
MP360
-----
Type: Unknown
Installed in HPLIP?: No, not using the hp: or hpfax: CUPS backend.
Device URI: smb://chocolate/MP360
PPD: /etc/cups/ppd/MP360.ppd
PPD Description: Canon S600 Foomatic/bj8pa06n.upp (recommended)
Printer status: printer MP360 disabled since Thu 20 Dec 2007 13:07:27 CST -
/usr/lib/cups/backend/smb failed
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
Checking output of 'scanimage -L'...
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x1f12 at 001:003:
Device URI: hp:/usb/Officejet_Pro_K5300?serial=MY742380S7
Device node: /dev/bus/usb/001/003
Mode: 0664
-----------
| SUMMARY |
-----------
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
Done.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.27-rc5 (SMP w/1 CPU core; PREEMPT)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages hplip depends on:
ii adduser 3.110 add and remove users and groups
ii coreutils 6.10-6 The GNU core utilities
ii cups 1.3.8-1lenny1 Common UNIX Printing System(tm) -
ii hplip-data 2.8.6.b-1 HP Linux Printing and Imaging - da
ii libc6 2.7-13 GNU C Library: Shared libraries
ii libcups2 1.3.8-1lenny1 Common UNIX Printing System(tm) -
ii libdbus-1-3 1.2.1-3 simple interprocess messaging syst
ii libsnmp15 5.4.1~dfsg-9 SNMP (Simple Network Management Pr
ii libssl0.9.8 0.9.8g-13 SSL shared libraries
ii libusb-0.1-4 2:0.1.12-13 userspace USB programming library
ii lsb-base 3.2-20 Linux Standard Base 3.2 init scrip
ii python 2.5.2-2 An interactive high-level object-o
ii python-dbus 0.83.0-1 simple interprocess messaging syst
ii python-imaging 1.1.6-3 Python Imaging Library
ii python-support 0.8.6 automated rebuilding support for P
Versions of packages hplip recommends:
ii cups-client 1.3.8-1lenny1 Common UNIX Printing System(tm) -
ii hpijs 2.8.6.b-1 HP Linux Printing and Imaging - gs
ii hplip-gui 2.8.6.b-1 HP Linux Printing and Imaging - GU
Versions of packages hplip suggests:
ii gksu 2.0.0-5 graphical frontend to su
ii hplip-doc 2.8.6.b-1 HP Linux Printing and Imaging - do
ii kdebase-bin 4:3.5.9.dfsg.1-5 core binaries for the KDE base mod
ii kdeprint 4:3.5.9.dfsg.1-5 print system for KDE
pn openprinting-ppds <none> (no description available)
-- debconf-show failed
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
