Package: linux-image-2.6.26-1-486 Version: 2.6.26-4 Severity: normal I found a kernel timing problem in 2.6.26-1-486 running as VM in kvm, dmesg attachted. To login into the machine isn't posible, because after I type in the username and press <Enter>, login told me, the maximum waiting time is passed. KVM version is 63.
Greetings, Christoph ** Kernel log: [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-486 (Debian 2.6.26-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 Thu Aug 28 11:14:57 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fffbd000 - 0000000100000000 (reserved) [ 0.000000] 511MB LOWMEM available. [ 0.000000] kvm-clock: cpu 0, msr 0:3c86e1, boot clock [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131056 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131056 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000FB450, 0014 (r0 QEMU ) [ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 QEMU QEMURSDT 1 QEMU 1) [ 0.000000] ACPI: FACP 1FFF002C, 0074 (r1 QEMU QEMUFACP 1 QEMU 1) [ 0.000000] ACPI: DSDT 1FFF0100, 1632 (r1 BXPC BXDSDT 1 INTL 20061109) [ 0.000000] ACPI: FACS 1FFF00C0, 0040 [ 0.000000] ACPI: APIC 1FFF1738, 00E0 (r1 QEMU QEMUAPIC 1 QEMU 1) [ 0.000000] ACPI: PM-Timer IO Port: 0xb008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dffbd000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000 [ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032 [ 0.000000] Kernel command line: root=/dev/hda2 ro console=ttyS0 [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 2800.955 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [ttyS0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Memory: 510360k/524224k available (1693k kernel code, 13304k reserved, 746k data, 320k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfffb3000 - 0xfffff000 ( 304 kB) [ 0.004000] vmalloc : 0xe0800000 - 0xfffb1000 ( 503 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.004000] .init : 0xc0364000 - 0xc03b4000 ( 320 kB) [ 0.004000] .data : 0xc02a75d3 - 0xc0362000 ( 746 kB) [ 0.004000] .text : 0xc0100000 - 0xc02a75d3 (1693 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.088005] Calibrating delay using timer specific routine.. 10523.01 BogoMIPS (lpj=21046026) [ 0.096006] Security Framework initialized [ 0.096006] SELinux: Disabled at boot. [ 0.100006] Capability LSM initialized [ 0.100006] Mount-cache hash table entries: 512 [ 0.104006] Initializing cgroup subsys ns [ 0.108006] Initializing cgroup subsys cpuacct [ 0.108006] Initializing cgroup subsys devices [ 0.112007] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.116007] CPU: L2 Cache: 512K (64 bytes/line) [ 0.116007] CPU: AMD QEMU Virtual CPU version 0.9.1 stepping 03 [ 0.128008] Freeing SMP alternatives: 0k freed [ 0.132008] ACPI: Core revision 20080321 [ 0.136008] ENABLING IO-APIC IRQs [ 0.140008] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.224014] APIC calibration not consistent with PM Timer: 184ms instead of 100ms [ 0.224014] APIC delta adjusted to PM-Timer: 6249976 (11500632) [ 0.228014] net_namespace: 652 bytes [ 0.228014] Booting paravirtualized kernel on KVM [ 0.232014] NET: Registered protocol family 16 [ 0.232014] EISA bus registered [ 0.236014] ACPI: bus type pci registered [ 0.236014] PCI: PCI BIOS revision 2.10 entry at 0xfadb0, last bus=0 [ 0.240015] PCI: Using configuration type 1 for base access [ 0.244015] Setting up standard PCI resources [ 0.248015] ACPI: Interpreter enabled [ 0.252015] ACPI: (supports S0 S5) [ 0.252015] ACPI: Using IOAPIC for interrupt routing [ 0.256016] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.292018] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI [ 0.296018] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB [ 0.304019] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.304019] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.308019] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.312019] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.316019] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.316019] pnp: PnP ACPI init [ 0.320020] ACPI: bus type pnp registered [ 0.324020] pnp: PnP ACPI: found 7 devices [ 0.324020] ACPI: ACPI bus type pnp unregistered [ 0.328020] PnPBIOS: Disabled [ 0.328020] PCI: Using ACPI for IRQ routing [ 1.478184] Clocksource tsc unstable (delta = -674166761 ns) [ 8.249591] PM-Timer running at invalid rate: 146% of normal - aborting. [ 8.917681] NET: Registered protocol family 2 [ 9.361715] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 10.076171] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 10.836908] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 11.499949] TCP: Hash tables configured (established 16384 bind 16384) [ 12.176231] TCP reno registered [ 12.177379] NET: Registered protocol family 1 [ 12.937450] checking if image is initramfs... it is [ 149.154801] Freeing initrd memory: 5629k freed [ 150.969756] audit: initializing netlink socket (disabled) [ 151.659614] type=2000 audit(3328654539.659:1): initialized [ 152.211888] Total HugeTLB memory allocated, 0 [ 152.667909] VFS: Disk quotas dquot_6.5.1 [ 152.669604] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 153.719424] msgmni has been set to 1008 [ 154.103494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 154.887741] io scheduler noop registered [ 155.275605] io scheduler anticipatory registered [ 155.726456] io scheduler deadline registered [ 155.728932] io scheduler cfq registered (default) [ 156.596990] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 156.600052] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 164.240888] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 164.849046] isapnp: Scanning for PnP cards... [ 412.752707] isapnp: No Plug & Play device found [ 419.549293] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 420.806286] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 [ 421.434448] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 [ 422.076216] brd: module loaded [ 422.076216] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 429.569944] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 430.087204] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 430.595258] mice: PS/2 mouse device common for all mice [ 431.136093] input: AT Translated Set 2 keyboard as /class/input/input0 [ 431.136093] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 432.461797] rtc0: alarms up to one day [ 432.461797] EISA: Probing bus 0 at eisa.0 [ 433.253255] EISA: Detected 0 cards. [ 433.253255] cpuidle: using governor ladder [ 434.082557] cpuidle: using governor menu [ 434.478581] No iBFT detected. [ 434.481513] TCP cubic registered [ 435.151495] NET: Registered protocol family 17 [ 435.607524] Using IPI Shortcut mode [ 435.608019] registered taskstats version 1 [ 436.435759] rtc_cmos 00:01: setting system clock to 2008-09-01 09:16:49 UTC (1220260609) [ 437.243861] Freeing unused kernel memory: 320k freed Loading, please wait... Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... [ 497.991857] ACPI: ACPI0007:00 is registered as cooling_device0 [ 712.940031] No dock devices found. [ 722.675097] usbcore: registered new interface driver usbfs [ 723.271635] usbcore: registered new interface driver hub [ 732.015167] SCSI subsystem initialized [ 738.372317] usbcore: registered new device driver usb [ 739.439560] USB Universal Host Controller Interface driver v3.0 [ 741.327093] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 741.943537] ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 11 (level, high) -> IRQ 11 [ 742.852212] uhci_hcd 0000:00:01.2: UHCI Host Controller [ 742.852212] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 744.134834] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020 [ 744.731242] usb usb1: configuration #1 chosen from 1 choice [ 745.355290] hub 1-0:1.0: USB hub found [ 745.742921] hub 1-0:1.0: 2 ports detected [ 757.375898] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 765.168844] FDC 0 is a S82078B [ 771.424332] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 772.908539] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 773.888598] usb usb1: Product: UHCI Host Controller [ 773.892524] usb usb1: Manufacturer: Linux 2.6.26-1-486 uhci_hcd [ 775.338320] usb usb1: SerialNumber: 0000:00:01.2 [ 776.184190] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 777.751024] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, high) -> IRQ 10 [ 779.494593] eth0: RTL-8139C+ at 0xe0874000, 54:52:00:d9:67:27, IRQ 10 [ 781.169286] Uniform Multi-Platform E-IDE driver [ 782.370557] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 784.728135] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 787.493284] PIIX3: IDE controller (0x8086:0x7010 rev 0x00) at PCI slot 0000:00:01.1 [ 788.804511] PIIX3: not 100% native mode: will probe irqs later [ 789.616049] ide0: BM-DMA at 0xc000-0xc007 [ 789.616049] ide1: BM-DMA at 0xc008-0xc00f [ 796.533209] 8139too Fast Ethernet driver 0.9.28 [ 802.287422] hda: QEMU HARDDISK, ATA DISK drive [ 809.951448] usb 1-2: configuration #1 chosen from 1 choice [ 818.432986] usb 1-2: New USB device found, idVendor=0627, idProduct=0001 [ 819.591220] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 820.558177] usb 1-2: Product: QEMU USB Tablet [ 821.152296] usb 1-2: Manufacturer: QEMU 0.9.1 [ 821.152296] usb 1-2: SerialNumber: 1 [ 822.216233] hda: MWDMA2 mode selected [ 828.726416] usbcore: registered new interface driver hiddev [ 832.028544] input: QEMU 0.9.1 QEMU USB Tablet as /class/input/input1 [ 833.089085] input,hidraw0: USB HID v0.01 Pointer [QEMU 0.9.1 QEMU USB Tablet] on usb-0000:00:01.2-2 [ 835.578568] usbcore: registered new interface driver usbhid [ 836.337857] usbhid: v2.6:USB HID core driver [ 836.917431] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 851.031421] hdc: MWDMA2 mode selected [ 857.929847] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 858.564784] ide1 at 0x170-0x177,0x376 on irq 15 [ 875.149368] hda: max request size: 512KiB [ 881.819307] hda: 41943040 sectors (21474 MB) w/256KiB Cache, CHS=16383/255/63 [ 882.392260] hda: cache flushes supported [ 883.431621] hda: hda1 hda2 hda3 < hda5 > [ 899.902854] hdc: ATAPI 4X CD-ROM drive, 512kB Cache [ 900.309498] Uniform CD-ROM driver Revision: 3.20 done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... kinit: name_to_dev_t(/dev/hda1) = hda1(3,1) kinit: trying to resume from /dev/hda1 [ 967.688487] PM: Starting manual resume from disk kinit: No resume image, doing normal boot... done. [ 980.504026] EXT3-fs: INFO: recovery required on readonly filesystem. [ 981.644219] EXT3-fs: write access will be enabled during recovery. [ 1210.605565] kjournald starting. Commit interval 5 seconds [ 1211.522568] EXT3-fs: recovery complete. [ 1212.049771] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.86 booting [ 1418.986606] udevd version 125 started [ 2215.005465] input: Power Button (FF) as /class/input/input2 [ 2227.497605] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3 [ 2241.381506] ACPI: Power Button (FF) [PWRF] [ 2289.297678] piix4_smbus 0000:00:01.3: Found 0000:00:01.3 device [ 2296.501141] parport_pc 00:05: reported by Plug and Play ACPI [ 2297.836097] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 2403.774512] input: PC Speaker as /class/input/input4 [ 2432.850564] Error: Driver 'pcspkr' is already registered, aborting... [ 3240.580312] loop: module loaded [ 3469.617422] kjournald starting. Commit interval 5 seconds [ 3470.520309] EXT3 FS on hda5, internal journal [ 3471.348108] EXT3-fs: mounted filesystem with ordered data mode. [ 3758.614868] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 [ 3979.572811] NET: Registered protocol family 10 [ 3980.421670] lo: Disabled Privacy Extensions -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
