Op Tuesday 22 July 2008, schreef Julien BLACHE: > > I've just realized a couple of minutes ago that the patch containing > some Avision fixes that may help with this problem was never enabled > in the package. > > I'm building libsane 1.0.19-15 right now with the patch enabled as it > should have been in 1.0.19-11 already. > > You probably want to test this version. Sorry for that, and I hope > it'll at least help partially solve the issue. Woops.
libsane 1.0.19-15 for i386 is not available yet, so I just compiled it myself. Good news, exactly the same results as David. The scanner (and libsane 1.0.19-15) is operating ok with scanimage and xscanimage here. With a standard /etc/sane.d/avision.conf file. Xsane is still not usable, no segfaults anymore, but the same very slow startup (about 7 minutes) and no GUI respons at all. Windows are not updated if they are lowered and raised over another. They stay grey, so I can not find out what xsane thinks about my firmware version. So this is a pure xsane problem now? or maybe another set of libsane calls by xsane versus xscanimage? But ... happy faces here, thanks Rene and Julien. Bert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
