Hi Roy,
2008/7/10 Roy Berkeveld <[EMAIL PROTECTED]>:
> Package: nut
> Version: 2.2.2-2
>
> From #334105:
>> Place this in /etc/nut/rules.d/01-ups.rules or something:
>> KERNEL="ttyS15", GROUP="nut"
>
> The documentation (/usr/share/doc/nut/README.Debian.gz) lists the following:
>
>> b) Another solution, for system supporting udev, is to create a file
>> (for example /etc/udev/rules.d/01-ups.rules) and to add something
>> like:
>> KERNEL="ttyS1", GROUP="nut"
>>
>> where 'ttyS1' has to be replaced by the exact name of your serial
>> port.
>
> Which does not work.
>
> It should be
> KERNEL=="ttyS1", GROUP="nut"
> (note the double equals sign)
>
> And the filename should be something which will get sorted after
> 020_permissions.rules (as this sets dialout on the tty subsystem)
>
> I suggest 52_nut-serialups.rules as we have an existing
> 52_nut-usbups.rules already.
fully right, I have applied this for the upcoming (and I hope the
last) -6 upload for lenny
> Also, I am happy to report that I was successful in setting up nut this
> way, even though there were initially no files present in /etc/nut/ (the
> directory itself was though) and I had to create them all from the
> documentation. Perhaps some default config files with comments would be
> nice; nut is disabled from starting by default anyway so this could
> initially fit to a common default.
I still have some care to give to this area, though there is a note at
§II of the README.Debian
Note that sample configuration files are provided in
/usr/share/doc/nut/examples/. Simply copy these under
/etc/nut and follow the below information for tuning.
I've modified it like that
s/Note that/NOTE:/
Note that the config is a long standing issue linked to #254355
thanks for your report,
Arnaud
