Package: setserial
Version: 2.17-40
Severity: normal
Thu May 26 03:55:22 doh:~/led# cat /var/lib/setserial/autoserial.conf
###PORT STATE GENERATED USING AUTOSAVE-ONCE###
###AUTOSAVE-ONCE###
#
###PORT STATE GENERATED USING AUTOSAVE-ONCE###
###AUTOSAVE-ONCE###
###AUTOSAVE-ONCE###
###AUTOSAVE###
#
# If you want to configure this file by hand, use
# dpkg --configure setserial
# and change the configuration mode of the file to MANUAL. If you do not do
this# this file may be overwritten automatically the next time you upgrade
the
# package.
#
#/dev/ttyS0 uart 16550A port 0x03f8 irq 4 baud_base 115200 spd_normal
skip_test
#/dev/ttyS1 uart 16550A port 0x02f8 irq 3 baud_base 115200 spd_normal
skip_test
/dev/ttyS0 uart 8250 port 0x300 irq 4 baud_base 115200 spd_normal
Thu May 26 03:55:42 doh:~/led# dpkg --configure setserial
dpkg: error processing setserial (--configure):
package setserial is already installed and configured
Errors were encountered while processing:
setserial
Thu May 26 03:56:46 doh:~/led#
dpkg-reconfigure setserial
works a treat.
regards
Mark
-- System Information:
Debian Release: 3.1
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/dash
Kernel: Linux 2.6.7-1-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Versions of packages setserial depends on:
ii debconf 1.4.49 Debian configuration management sy
ii libc6 2.3.2.ds1-22 GNU C Library: Shared libraries an
-- debconf information:
setserial/rc-boot-file-removed:
setserial/rc-boot-file-renamed:
setserial/update-modules-failed:
setserial/autosave: true
* setserial/usemodup: true
* setserial/autosave-types: autosave once
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
