Package: hotplug
Version: 0.0.20040329-22
Severity: normal
My problem mainly deals with a PQI high speed usb 2.0
reader (Travel
Flash) which I use to read/write SD cards. This is
with any
brands/capacity of SD cards that I have (from 128mb to
1 gig). When I
boot the pc with the card inserted, it is correctly
recognized and
correct device name is created under /dev/sdd1. Also,
when the computer
is already started, if I plug in the card, it usually
detects and
correct device name is created about 80% of the time.
However, when I remove the card and reinsert it,
correct device name in
/dev/ is not created. It might work the first
(re)insertion, but
afterwards, it will always not work. It might create
/dev/sdd, but this
won't work as memory card needs /dev/sdd1 to be
properly mounted.
DMESG shows that card is detected with correct
capacity, but correct
device name is not created in second+ insertion. This
is true whether I
properly unmount the card or not.
Currently, I run Debian Sarge. Interestingly, when I
used to run Ubuntu
Hoary, I had the same problem. Only way to fix the
problem was
init.d/hotplug restart, which will almost always allow
me to mount the
sd card. I tried this under Sarge, and this seems to
hang hotplug (thus
my mouse as well).
Thanks.
Some dmesg messages:
usb 5-3.4: new high speed USB device using address 6
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: Generic Model: STORAGE DEVICE Rev: 0119
Type: Direct-Access ANSI
SCSI revision: 02
SCSI device sda: 1984000 512-byte hdwr sectors
(1016 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host1/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi1,
channel 0, id 0, lun 0
Vendor: Generic Model: STORAGE DEVICE Rev:
0119
Type: Direct-Access
ANSI SCSI revision:
02
Attached scsi removable disk sdb at scsi1,
channel 0, id 0, lun
1
Vendor: Generic Model: STORAGE DEVICE
Rev: 0119
Type: Direct-Access
ANSI SCSI
revision: 02
SCSI device sdc: 1984000 512-byte hdwr
sectors (1016 MB)
--More--
Vendor: Generic Model: STORAGE DEVICE Rev: 0119
Type: Direct-Access
ANSI SCSI
revision: 02
SCSI device sdc: 1984000 512-byte hdwr
sectors (1016 MB)
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
/dev/scsi/host1/bus0/target0/lun2: p1
Attached scsi removable disk sdc at
scsi1, channel 0, id
0, lun 2
Vendor: Generic Model: STORAGE
DEVICE Rev: 0119
Type: Direct-Access
ANSI SCSI
revision: 02
Attached scsi removable disk sdd at
scsi1, channel 0,
id 0, lun 3
USB Mass Storage device found at 6
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-2-k7
Locale: LANG=ko_KR.UTF-8, LC_CTYPE=ko_KR.UTF-8
(charmap=UTF-8)
Versions of packages hotplug depends on:
ii bash 2.05b-26 The GNU
Bourne Again SHell
ii debconf 1.4.30.13 Debian
configuration management sy
ii grep 2.5.1.ds1-4 GNU grep,
egrep and fgrep
ii module-init-tools 3.2-pre1-2 tools for
managing Linux kernel mo
ii modutils 2.4.26-1.2 Linux
module utilities
ii procps 1:3.2.1-2 The /proc
file system utilities
ii sed 4.1.2-8 The GNU
sed stream editor
-- debconf information:
hotplug/ignore_pci_class_display: true
hotplug/net_agent_policy: hotplug
hotplug/static_module_list:
hotplug/x11_usbmice_hack: false
&
__________________________________
Yahoo! Mail Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
http://mobile.yahoo.com/learn/mail
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
