* John Goerzen <[EMAIL PROTECTED]> [20080322 23:23]:
> On Saturday 22 March 2008 5:34:21 am Thomas Arendsen Hein wrote:
>
> > Setting up bacula-sd (2.2.8-5) ...
> > Starting Bacula Storage daemon: 22-Mar 11:24 bacula-sd: ERROR TERMINATION
> > at lex.c:735 Config error: expected a name, got T_EOL: =
> >
> > : line 49, col 20 of file /etc/bacula/bacula-sd.conf
> >
> > Archive Device =
>
> Looks to me like you have a configuration file error. Can you send me a copy
> of your bacula-sd.conf?
There was no /etc/bacula before running
apt-get install bacula-server bacula-console bacula-sd-sqlite3 bacula-doc
(just verified that, but I must correct that apt/sources point to
testing, not sid)
I attached the generated/included config anyway.
Regards,
Thomas
--
[EMAIL PROTECTED] - http://intevation.de/~thomas/ - OpenPGP key: 0x5816791A
Intevation GmbH, Osnabrueck - Register: Amtsgericht Osnabrueck, HR B 18998
Geschaeftsfuehrer: Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner
#
# Default Bacula Storage Daemon Configuration file
#
# For Bacula release 2.2.8 (26 January 2008) -- debian lenny/sid
#
# You may need to change the name of your tape drive
# on the "Archive Device" directive in the Device
# resource. If you change the Name and/or the
# "Media Type" in the Device resource, please ensure
# that dird.conf has corresponding changes.
#
Storage { # definition of myself
Name = finnix-sd
SDPort = 9103 # Director's port
WorkingDirectory = "/var/lib/bacula"
Pid Directory = "/var/run/bacula"
Maximum Concurrent Jobs = 20
SDAddress = 127.0.0.1
}
#
# List Directors who are permitted to contact Storage daemon
#
Director {
Name = finnix-dir
Password = "XMl5XCYjTvyojX7cvTlo1+AuIPvnSmwX/Data1ny+Tpu"
}
#
# Restricted Director, used by tray-monitor to get the
# status of the storage daemon
#
Director {
Name = finnix-mon
Password = "XUgHVsTZ9BtGQgXe5DmZoFUsTfW3QwGQ5JLJ89ZXrNcQ"
Monitor = yes
}
#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
# same Name and MediaType.
#
Device {
Name = FileStorage
Media Type = File
Archive Device =
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = Yes;
AutomaticMount = yes; # when device opened, read it
RemovableMedia = no;
AlwaysOpen = no;
}
#
# An autochanger device with two drives
#
#Autochanger {
# Name = Autochanger
# Device = Drive-1
# Device = Drive-2
# Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
# Changer Device = /dev/sg0
#}
#Device {
# Name = Drive-1 #
# Drive Index = 0
# Media Type = DLT-8000
# Archive Device = /dev/nst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# AutoChanger = yes
# #
# # Enable the Alert command only if you have the mtx package loaded
# # Note, apparently on some systems, tapeinfo resets the SCSI controller
# # thus if you turn this on, make sure it does not reset your SCSI
# # controller. I have never had any problems, and smartctl does
# # not seem to cause such problems.
# #
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#Device {
# Name = Drive-2 #
# Drive Index = 1
# Media Type = DLT-8000
# Archive Device = /dev/nst1
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# A Linux or Solaris tape drive
#
#Device {
# Name = DDS-4 #
# Media Type = DDS-4
# Archive Device = /dev/nrst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
## Changer Device = /dev/sg0
## AutoChanger = yes
# # Enable the Alert command only if you have the mtx package loaded
## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
## If you have smartctl, enable this, it has more info than tapeinfo
## Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# A FreeBSD tape drive
#
#Device {
# Name = DDS-4
# Description = "DDS-4 for FreeBSD"
# Media Type = DDS-4
# Archive Device = /dev/nsa1
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes
# Offline On Unmount = no
# Hardware End of Medium = no
# BSF at EOM = yes
# Backward Space Record = no
# Fast Forward Space File = no
# TWO EOF = yes
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# A OnStream tape drive.
# You need the kernel osst driver 0.9.14 or later, and
# do "mt -f /dev/nosst0 defblksize 32768" once as root.
#
#Device {
# Name = OnStream
# Description = "OnStream drive on Linux"
# Media Type = OnStream
# Archive Device = /dev/nrst0
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = yes
# Offline On Unmount = no
## The min/max blocksizes of 32768 are *required*
# Minimum Block Size = 32768
# Maximum Block Size = 32768
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# A DVD device
#
#Device {
# Name = "DVD Writer"
# Media Type = DVD
# Device Type = DVD
# Archive Device = /dev/hdc
# LabelMedia = yes; # lets Bacula label unlabeled media
# Random Access = Yes;
# AutomaticMount = yes; # when device opened, read it
# RemovableMedia = yes;
# AlwaysOpen = no;
# MaximumPartSize = 800M;
# RequiresMount = yes;
# MountPoint = /mnt/cdrom;
# MountCommand = "/bin/mount -t iso9660 -o ro %a %m";
# UnmountCommand = "/bin/umount %m";
# SpoolDirectory = /tmp/backup;
# WritePartCommand = "/etc/bacula/dvd-handler %a write %e %v"
# FreeSpaceCommand = "/etc/bacula/dvd-handler %a free"
#}
#
# For OpenBSD OS >= 3.6
#
#Device {
# Name = DDS-3
# Media Type = DDS-3
# Archive Device = /dev/nrst0
# Use MTIOCGET= no
# BSF at EOM = yes
# TWO EOF = no
# AutomaticMount = yes;
# AlwaysOpen = yes;
# RemovableMedia = yes;
# RandomAccess = no;
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# A very old Exabyte with no end of media detection
#
#Device {
# Name = "Exabyte 8mm"
# Media Type = "8mm"
# Archive Device = /dev/nrst0
# Hardware end of medium = No;
# AutomaticMount = yes; # when device opened, read it
# AlwaysOpen = Yes;
# RemovableMedia = yes;
# RandomAccess = no;
# If you have smartctl, enable this, it has more info than tapeinfo
# Alert Command = "sh -c 'smartctl -H -l error %c'"
#}
#
# Send all messages to the Director,
# mount messages also are sent to the email address
#
Messages {
Name = Standard
director = finnix-dir = all
}
