also sprach martin f krafft <[EMAIL PROTECTED]> [2008.02.17.1327 +0100]: > I assume that my screen 0 is attached to PCI:0:12:0 and screens > 1 and 2 are fed by PCI:1:0:0. X doesn't address PCI:1:0:1, but > rather just feeds both screens. xrandr -q reports:
I will write a mail to the xorg mailing list after this, so this is
just for posterity. I appreciate any input you may have, regardless.
Gah, I was doing this via SSH and thus got bitten by $DISPLAY. When
run against the actual display, xrandr -q reports:
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1280 x 1200
VGA-0 connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x
0mm
1280x800 60.0*
1280x768 60.0
1024x768 60.0
800x600 60.3
640x480 59.9
DVI-0 connected 1280x1024+0+0 (normal left inverted right x axis y axis)
375mm x 301mm
1280x1024 60.0*+ 75.0 59.9
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
S-video disconnected (normal left inverted right x axis y axis)
With this, I am actually failing to turn on VGA-0, even with
--same-as; the screen just stays blank.
Also, there's a maximum of 1280x1200 on screen 0. I really want
3840x1024 to put my three screens next to each other. Is this at all
possible?
When I try to add VGA-0, I get:
piper:~# xrandr --output VGA-0 --auto --right-of DVI-0
xrandr: screen cannot be larger than 1280x1200 (desired size 2560x1024)
This will be in the logs after I do that. What I find very strange
is that it mentions the Acer AL922 twice. This is the monitor
connected to the DVI-0 output. There's an "MRM B18XA" connected to
VGA-0 instead.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
in RADEONProbeOutputModes
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0
----------------------
(II) RADEON(0): Manufacturer: ABO Model: 9990 Serial#: 619
(II) RADEON(0): Year: 2003 Week: 2
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): DFP 1.x compatible TMDS
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.647 redY: 0.346 greenX: 0.292 greenY: 0.602
(II) RADEON(0): blueX: 0.149 blueY: 0.130 whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 375 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 24 H max: 80 kHz,
PixClock max 140 MHz
(II) RADEON(0): Monitor name: Acer AL922
(II) RADEON(0): Serial No: ET9093020026B
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff00044f90996b020000
(II) RADEON(0): 020d010381251e78eaec50a5584a9a26
(II) RADEON(0): 215054bfef0081800101010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300772d1100001e000000fd00384b18
(II) RADEON(0): 500e000a202020202020000000fc0041
(II) RADEON(0): 63657220414c3932320a2020000000ff
(II) RADEON(0): 00455439303933303230303236420048
in RADEONProbeOutputModes
(II) RADEON(0): EDID vendor "ABO", prod id 39312
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Found color CRT connected to primary DAC
in RADEONProbeOutputModes
(II) RADEON(0): Total number of valid Screen mode(s) added: 0
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
(II) RADEON(0): EDID data from the display on output: DVI-0
----------------------
(II) RADEON(0): Manufacturer: ABO Model: 9990 Serial#: 619
(II) RADEON(0): Year: 2003 Week: 2
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): DFP 1.x compatible TMDS
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 37 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.647 redY: 0.346 greenX: 0.292 greenY: 0.602
(II) RADEON(0): blueX: 0.149 blueY: 0.130 whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): [EMAIL PROTECTED]
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz Image Size: 375 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 24 H max: 80 kHz,
PixClock max 140 MHz
(II) RADEON(0): Monitor name: Acer AL922
(II) RADEON(0): Serial No: ET9093020026B
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff00044f90996b020000
(II) RADEON(0): 020d010381251e78eaec50a5584a9a26
(II) RADEON(0): 215054bfef0081800101010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300772d1100001e000000fd00384b18
(II) RADEON(0): 500e000a202020202020000000fc0041
(II) RADEON(0): 63657220414c3932320a2020000000ff
(II) RADEON(0): 00455439303933303230303236420048
in RADEONProbeOutputModes
(II) RADEON(0): EDID vendor "ABO", prod id 39312
--
.''`. martin f. krafft <[EMAIL PROTECTED]>
: :' : proud Debian developer, author, administrator, and user
`. `'` http://people.debian.org/~madduck - http://debiansystem.info
`- Debian - when you have better things to do than fixing systems
SUSE: Soll Unix Sein, Eigentlich.
digital_signature_gpg.asc
Description: Digital signature (see http://martin-krafft.net/gpg/)
