Package: acpi-support
Version: 0.103-5
Severity: normal
--- Please enter the report below this line. ---
Out of the 3 disks I have in my desktop, one doesn't support the
hdparm -B 254 command, and I get this in dmesg [*].
Any workarounds? Or is this a problem with the disk reporting it
supports setting accoustic management, but in fact it doesn't
support that (or not in a standard way)?
[*]
ata4.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0
ata4.00: CPB resp_flags 0x11: , CMD error
ata4.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
res 51/04:fe:00:00:00/00:00:00:00:00/40 Emask 0x1 (device
error)
ata4.00: status: { DRDY ERR }
ata4.00: error: { ABRT }
More about this disk:
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 21
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: WDC WD2500JS-19MHB0, 02.01C03, max UDMA/133
ata4.00: 488397168 sectors, multi 1: LBA48
ata4.00: configured for UDMA/133
ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF,
hw segs 61
$ sudo hdparm -i /dev/sdb
/dev/sdb:
Model=WDC WD2500JS-19MHB0 , FwRev=02.01C03,
SerialNo= WD-WCANK1390156
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs
FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=?1?
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1,2,3,4,5,6,7
* signifies the current active mode
$ sudo hdparm -I /dev/sdb
/dev/sdb:
ATA device, with non-removable media
Model Number: WDC WD2500JS-19MHB0
Serial Number: WD-WCANK1390156
Firmware Revision: 02.01C03
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 488397168
device size with M = 1024*1024: 238475 MBytes
device size with M = 1000*1000: 250059 MBytes (250 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, with device
specific minimum
R/W multiple sector transfer: Max = 16 Current = 1
Recommended acoustic management value: 128, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5
*udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Host-initiated interface power management
* Phy event counters
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12]
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
Checksum: correct
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.24-rc6-ge697789d
Debian Release: lenny/sid
500 unstable www.debian-multimedia.org
500 unstable ftp.iasi.roedu.net
500 testing ftp.iasi.roedu.net
500 gutsy wine.budgetdedicated.com
1 experimental ftp.iasi.roedu.net
--- Package information. ---
Depends (Version) | Installed
================================-+-===========
acpi-support-base | 0.103-5
acpid (>= 1.0.4) | 1.0.6-4
dmidecode (>= 2.7-1) | 2.9-1
finger | 0.17-11
hdparm | 7.7-1
laptop-detect | 0.13.4
libc6 (>= 2.7-1) | 2.7-5
lsb-base (>= 1.3-9) | 3.1-24
nvclock | 0.8b2-1
powermgmt-base | 1.29
radeontool | 1.5-5
vbetool | 1.0-1.1
x11-xserver-utils | 7.3+2
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
