On Tuesday 12 April 2005 23:14, Philippe Bourcier wrote: > hi all, > > On Tue, Apr 12, 2005 at 12:05:02AM +0200, maximilian attems wrote: > > received another bug report concerning TI irq routing. > > your patch don't seem to fix this PCI1250 rev2. > > you'll find the bug report at > > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=303550 > > > > note that the previous bug report #270376 involved a PCI1220 (rev 02) > > thanks a lot again for your help. > > debian user seem to be a good user base for your patches. ;-) > > > --- reply to previous bug report follows > > > On Sun, 10 Apr 2005, Philippe Bourcier wrote: > > > > > On Sat, Apr 09, 2005 at 09:52:53PM +0200, maximilian attems wrote: > > > > could you tested the kernel-image at: > > > > http://charm.itp.tuwien.ac.at/~mattems/ > > > > > > - the vga=791 boot parameter makes the system boot with a black > > > screen; if i switch to a console, i don't get one (graphical broken > > > screen); > > just with the above one: 2.6.11-ti-fix > > > > - the usb mouse doesn't work at all (console nor X); > > > > sorry i don't get you now, > > does this happen with any debian kernel or just with the one above? > > with 2.6.11-ti-fix and (sometimes...) with 2.6.11-1-686 > (debian) > > Apr 12 21:40:05 ile kernel: Linux version 2.6.11-1-686 ([EMAIL PROTECTED]) > (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Sun Apr 3 06:20:48 EDT 2005 > > Apr 12 21:40:05 ile kernel: Kernel command line: root=/dev/hda2 > video=vesafb:ywrap,mtrr vga=791 noapic acpi=off ro > > Apr 12 21:40:38 ile kernel: [<c013242a>] __report_bad_irq+0x2a/0xa0 > Apr 12 21:40:38 ile kernel: [<c0131ed0>] handle_IRQ_event+0x30/0x70 > Apr 12 21:40:38 ile kernel: [<c0132530>] note_interrupt+0x70/0xb0 > Apr 12 21:40:38 ile kernel: [<c0131ff0>] __do_IRQ+0xe0/0xf0 > Apr 12 21:40:38 ile kernel: [<c0105279>] do_IRQ+0x19/0x30 > Apr 12 21:40:38 ile kernel: [<c010391a>] common_interrupt+0x1a/0x20 > Apr 12 21:40:38 ile kernel: [<c011cb6e>] __do_softirq+0x2e/0x90 > Apr 12 21:40:38 ile kernel: [<c011cbf6>] do_softirq+0x26/0x30 > Apr 12 21:40:38 ile kernel: [<c010527e>] do_IRQ+0x1e/0x30 > Apr 12 21:40:38 ile kernel: [<c010391a>] common_interrupt+0x1a/0x20 > Apr 12 21:40:38 ile kernel: eth0: interrupt(s) dropped! > > > have you installed hotplug? if not is mousedev and psmouse loaded? > > yes: hotplug 0.0.20040329-22 Linux Hotplug Scripts > > > can you send in the output of cat /proc/bus/input/devices > > > > > Apr 10 14:34:55 ile kernel: Linux version 2.6.11-ti-fix ([EMAIL > > > PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-8)) #1 Fri Apr 8 19:47:44 > > > CEST 2005 > > .. > > > Apr 10 14:34:55 ile kernel: Linux Kernel Card Services > > > Apr 10 14:34:55 ile kernel: options: [pci] [cardbus] [pm] > > > Apr 10 14:34:55 ile kernel: PCI: Found IRQ 11 for device 0000:00:03.0 > > > Apr 10 14:34:55 ile kernel: Yenta: CardBus bridge found at 0000:00:03.0 > > > [0000:0000] > > > Apr 10 14:34:55 ile kernel: Yenta: Enabling burst memory read transactions > > > Apr 10 14:34:55 ile kernel: Yenta: Using CSCINT to route CSC interrupts > > > to PCI > > > Apr 10 14:34:55 ile kernel: Yenta: Routing CardBus interrupts to PCI > > > Apr 10 14:34:55 ile kernel: Yenta TI: socket 0000:00:03.0, mfunc > > > 0xcba97543, devctl 0x62 > > > Apr 10 14:34:55 ile kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11 > > > Apr 10 14:34:55 ile kernel: Socket status: 30000010 > > > Apr 10 14:34:55 ile kernel: PCI: Found IRQ 11 for device 0000:00:03.1 > > > Apr 10 14:34:55 ile kernel: Yenta: CardBus bridge found at 0000:00:03.1 > > > [0000:0000] > > > Apr 10 14:34:55 ile kernel: Yenta: Using CSCINT to route CSC interrupts > > > to PCI > > > Apr 10 14:34:55 ile kernel: Yenta: Routing CardBus interrupts to PCI > > > Apr 10 14:34:55 ile kernel: Yenta TI: socket 0000:00:03.1, mfunc > > > 0xcba97543, devctl 0x62 > > > Apr 10 14:34:55 ile kernel: Yenta: ISA IRQ mask 0x0698, PCI irq 11 > > > Apr 10 14:34:55 ile kernel: Socket status: 30000010 > > .. > > > Apr 10 14:35:16 ile kernel: eth0: 3Com 3c589, io 0x310, irq 9, hw_addr > > > 00:00:86:52:4B:CB > > > Apr 10 14:35:16 ile kernel: 8K FIFO split 5:3 Rx:Tx, auto xcvr > > > Apr 10 14:35:16 ile kernel: program smartd is using a deprecated SCSI > > > ioctl, please convert it to SG_IO > > > Apr 10 14:35:16 ile kernel: ttyS2 at I/O 0x3e8 (irq = 11) is a 16550A > > > Apr 10 14:35:21 ile kernel: eth0: flipped to 10baseT > > > Apr 10 14:35:23 ile xfs: ignoring font path element > > > /usr/lib/X11/fonts/cyrillic/ (unreadable) > > > Apr 10 14:35:23 ile xfs: ignoring font path element > > > /usr/lib/X11/fonts/CID (unreadable) > > > Apr 10 14:35:27 ile kernel: [<c01297b5>] __report_bad_irq+0x31/0x77 > > > Apr 10 14:35:27 ile kernel: [<c012985f>] note_interrupt+0x4c/0x71 > > > Apr 10 14:35:27 ile kernel: [<c0129476>] __do_IRQ+0x93/0xbd > > > Apr 10 14:35:27 ile kernel: [<c0104b35>] do_IRQ+0x19/0x24 > > > Apr 10 14:35:27 ile kernel: [<c01038ba>] common_interrupt+0x1a/0x20 > > > Apr 10 14:35:27 ile kernel: [<c01189a4>] __do_softirq+0x2c/0x7d > > > Apr 10 14:35:27 ile kernel: [<c0118a17>] do_softirq+0x22/0x26 > > > Apr 10 14:35:27 ile kernel: [<c0104b3a>] do_IRQ+0x1e/0x24 > > > Apr 10 14:35:27 ile kernel: [<c01038ba>] common_interrupt+0x1a/0x20 > > > Apr 10 14:35:27 ile kernel: eth0: interrupt(s) dropped! > > > > urgs, thanks for your testing and feedback. >
the ethernet cards irq is coming on the line of the cardbus bridge. this is because the CB_BRIDGE_INTR bit in the bridge control register isn't set. but there has been no relevant changes to yenta_socket in the 2.6.10 -> 2.6.11 timeframe as far as i can see. i think it could be a recent change to cs.c...i'm gonna read thru the code tomorrow or so.. doesn't sound to hard. rgds -daniel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
