Subject: wodim: No disk / Wrong disk! error Followup-For: Bug #399471 Package: wodim Version: 9:1.1.6-1
Hello, I have the same problem that Thomas had. Whenever I try to burn or erase CD-RW i get "No disc error". The same CD-RW and burner works flawlesssly in windows. Here are some additional informations: :~# wodim blank=all dev=/dev/hdc Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'LITE-ON ' Identification : 'CD-RW SOHR-5238S' Revision : '4S04' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Errno: 0 (Success), test unit ready scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s wodim: No disk / Wrong disk! :~# lspci 00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82815 CGC [Chipset Graphics Controller] (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 02) 00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 02) 00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 02) 01:0d.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) 01:0e.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) :~# hdparm /dev/hdc /dev/hdc: IO_support = 0 (default 16-bit) unmaskirq = 0 (off) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) HDIO_GETGEO failed: Inappropriate ioctl for device -- System Information: Debian Release: 4.0 by Linux-Systeme APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21-2-686 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages wodim depends on: ii libc6 2.5-11 GNU C Library: Shared libraries ii libcap1 1:1.10-14 support for getting/setting POSIX. Versions of packages wodim recommends: ii genisoimage 9:1.1.6-1 Creates ISO-9660 CD-ROM filesystem -- no debconf information Regards, Krystian
