Package: libsensors3 Version: 1:2.10.1-3 Severity: minor
In the "chip "it87-*" (...) section, I find the following template lines: ---- # Incubus Saturnus reports that the IT87 chip on Asus A7V8X-X seems # to report the VCORE voltage approximately 0.05V higher than the board's # BIOS does. Although it doesn't make much sense physically, uncommenting # the next line should bring the readings in line with the BIOS' ones in # this case. # compute in0 -0.05+@ , @+0.05 ---- -> This may be wrong: I have an A7V600 which reports 0.1 V more when running Windoze because it *sets* the processor voltage 0.1V higher after the POST. Seems to be for overclockers, and almost cooked my CPU until I set the CPU voltage manually. ---- # The A7V8X-X has temperatures inverted, and needs a conversion for # CPU temp. Thanks to Preben Randhol for the formula. [...] compute temp1 (-15.096+1.4893*@), (@+15.096)/1.4893 [...] # The A7V600 also has temperatures inverted, and needs a different # conversion for CPU temp. Thanks to Dariusz Jaszkowski for the formula. # WRONG !!! # label temp1 "CPU Temp" # label temp2 "M/B Temp" # compute temp1 (@+128)/3, ([EMAIL PROTECTED]) ---- -> For my A7V600, the settings below do NOT work, but instead the above settings for the V8X seem to work nicely. The V8X lines also are reported to work by an ML user on the web. -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.21.1 Locale: LANG=de_DE, LC_CTYPE=de_DE (charmap=ISO-8859-15) (ignored: LC_ALL set to [EMAIL PROTECTED]) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
