I've got a similar problem with an IOMEGA 100MB SCSI ZIP drive.
I've installed Etch RC2 using a CD burnt from
http://cdimage.debian.org/cdimage/etch_di_rc2/i386/jigdo-cd/debian-testing-i386-kde-CD-1.jigdo
My computer has an Adaptec 1542CP SCSI card to which the ZIP drive is
connected. After
1) adding the aha1542 driver to /etc/modules
2) addinq boot parameter acpi=noirq (via /etc/lilo.conf)
the driver for the Adapptec 1542CP card loads and ZIP drive is detected.
If there is a disk in the ZIP drive when the driver loads then both
/dev/sda and /dev/sda4 are created. If there isn't a disk in the ZIP
drive when the driver loads then only /dev/sda is created.
/dev/sda4 is the device used for mounting the ZIP disk.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
