X-Reportbug-Version: 3.33
X-Debbugs-Cc: [EMAIL PROTECTED]
Package: acpitool
Version: 0.4.7-1
Severity: normal
ACPITool shows negative times:
$ acpitool
Battery #1 : charged, 100.0%, -3:-17:-1
AC adapter : on-line
Thermal zone 1 : ok, 30 C
This is on a Dell Latitude D510. Any other information I can provide?
"acpitool -e -v" is attached.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (600, 'testing'), (50, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8) (ignored:
LC_ALL set to de_AT.utf8)
Kernel version : 2.6.18 - ACPI version : 20060707
-----------------------------------------------------------
Battery #1 : present
Remaining capacity : 4800 mAh, 100.0%, -2:-57:-48
Design capacity : 4800 mAh
Last full capacity : 4314 mAh, 89.88% of design capacity
Capacity loss : 10.12%
Present rate : 164 mA
Charging state : charged
Battery type : rechargeable, LION
Model number : DELL XP1376
Serial number : 54499
Battery #2 : slot empty
AC adapter : on-line
Fan : <not available>
CPU type : Intel(R) Pentium(R) M processor 1.73GHz
Min/Max frequency : 800/1733 MHz
Current frequency : 800 MHz
Frequency governor : ondemand
Freq. scaling driver : centrino
Cache size : 2048 KB
Bogomips : 1597.99
Processor ID : 0
Bus mastering control : yes
Power management : yes
Throttling control : yes
Limit interface : yes
Active C-state : C4
C-states (incl. C0) : 4
Usage of state C1 : 24838 (13.0 %)
Usage of state C2 : 12817 (6.7 %)
Usage of state C3 : 153192 (80.3 %)
T-state count : 8
Active T-state : T0
Thermal zone 1 : ok, 28 C
Trip points :
-------------
critical (S5): 102 C
Device Sleep state Status
---------------------------------------
1. LID 3 * enabled
2. PBTN 4 * enabled
3. PCI0 3 disabled
4. USB0 0 disabled
5. USB1 0 disabled
6. USB2 0 disabled
7. USB4 0 disabled
8. USB3 0 disabled
9. MODM 3 disabled
10. PCIE 4 disabled
