Package: linux-image-2.6.18-3-686 Version: 2.6.18-7~bpo.1 Severity: important
Kernel boot, module cciss is loaded, internal disks are detected successfully detected, disks on MSA20 enclosure is detected (is listed in /proc/driver/cciss/cciss0) but cannot be accessed. Kernel try to read paritition table, but commands finishes on timeouts: ... kernel: cciss: cmd f7fc0000 timedout kernel: Buffer I/O error on device cciss/c1d5, logical block 122088432 kernel: cciss: cmd f7fc0000 timedout kernel: Buffer I/O error on device cciss/c1d5, logical block 122088432 kernel: cciss: cmd f7fc0000 timedout kernel: Buffer I/O error on device cciss/c1d5, logical block 122088452 kernel: cciss: cmd f7fc0000 timedout kernel: Buffer I/O error on device cciss/c1d5, logical block 122088452 ... Tool hpacucli (from HP) in this case not shows MSA20 enclosure as "slot" and all disks from this enclosure (assigned/unassinged) are invisible. I try kernels 2.6.18-1-686 and now 2.6.18-3-686, but with equal results. Tested with controllers SmartArray 6i and 6400. With kernel 2.6.17 all works fine. Versions of modules cciss: 2.6.10 (kernel 2.6.17) 3.6.10 (kernel 2.6.18) Slavek -- System Information: Debian Release: 3.1 Architecture: i386 (i686) Kernel: Linux 2.6.17-2-686 Locale: LANG=cs_CZ, LC_CTYPE=cs_CZ (charmap=ISO-8859-2) Versions of packages linux-image-2.6.18-3-686 depends on: ii coreutils 5.2.1-2 The GNU core utilities ii debconf [debconf-2.0] 1.4.30.13 Debian configuration management sy ii initramfs-tools [linux- 0.73e~bpo.1 tools for generating an initramfs ii module-init-tools 3.3-pre3-1~bpo.1 tools for managing Linux kernel mo -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.18-3-686/postinst/bootloader-error-2.6.18-3-686: linux-image-2.6.18-3-686/postinst/old-dir-initrd-link-2.6.18-3-686: true linux-image-2.6.18-3-686/postinst/kimage-is-a-directory: linux-image-2.6.18-3-686/preinst/elilo-initrd-2.6.18-3-686: true linux-image-2.6.18-3-686/postinst/old-system-map-link-2.6.18-3-686: true linux-image-2.6.18-3-686/preinst/lilo-initrd-2.6.18-3-686: true linux-image-2.6.18-3-686/postinst/depmod-error-initrd-2.6.18-3-686: false linux-image-2.6.18-3-686/preinst/bootloader-initrd-2.6.18-3-686: true linux-image-2.6.18-3-686/prerm/removing-running-kernel-2.6.18-3-686: true linux-image-2.6.18-3-686/postinst/create-kimage-link-2.6.18-3-686: true linux-image-2.6.18-3-686/prerm/would-invalidate-boot-loader-2.6.18-3-686: true linux-image-2.6.18-3-686/preinst/abort-install-2.6.18-3-686: linux-image-2.6.18-3-686/preinst/overwriting-modules-2.6.18-3-686: true linux-image-2.6.18-3-686/preinst/initrd-2.6.18-3-686: linux-image-2.6.18-3-686/preinst/lilo-has-ramdisk: linux-image-2.6.18-3-686/preinst/already-running-this-2.6.18-3-686: linux-image-2.6.18-3-686/postinst/bootloader-test-error-2.6.18-3-686: linux-image-2.6.18-3-686/preinst/abort-overwrite-2.6.18-3-686: linux-image-2.6.18-3-686/postinst/old-initrd-link-2.6.18-3-686: true linux-image-2.6.18-3-686/postinst/depmod-error-2.6.18-3-686: false linux-image-2.6.18-3-686/preinst/failed-to-move-modules-2.6.18-3-686: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
