Package: installation-reports
Boot method: cdrom, with command "install"
Image version: Etch RC1 netinst
http://cdimage.debian.org/cdimage/etch_di_rc1/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 2006 Nov 30 0500 GMT
Machine: Dell Poweredge 1850, no raid controller
BIOS A05, MPT BIOS 5.06.06
Partitions: <df -Tl will do; the raw partition table is preferred>
# df -Tl /dev/sda
Filesystem Type 1K-blocks Used Available Use% Mounted on
udev tmpfs 10240 76 10164 1% /dev
# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 264443 102335 148453 41% /
udev 10240 76 10164 1% /dev
devshm 1038024 0 1038024 0% /dev/shm
/dev/sda9 56744320 184288 53677572 1% /home
/dev/sda8 381138 10288 351172 3% /tmp
/dev/sda5 4806904 442792 4119928 10% /usr
/dev/sda6 2885780 243856 2495336 9% /var
# fdisk -l /dev/sda
Disk /dev/sda: 73.4 GB, 73407820800 bytes
255 heads, 63 sectors/track, 8924 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 5 40131 de Dell Utility
/dev/sda2 6 266 2096482+ 6 FAT16
/dev/sda3 * 267 300 273105 83 Linux
/dev/sda4 301 8924 69272280 5 Extended
/dev/sda5 301 908 4883728+ 83 Linux
/dev/sda6 909 1273 2931831 83 Linux
/dev/sda7 1274 1698 3413781 82 Linux swap / Solaris
/dev/sda8 1699 1747 393561 83 Linux
/dev/sda9 1748 8924 57649221 83 Linux
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [o]
Detect network card: [o]
Configure network: [o]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o]
Partition hard drives: [o]
Install base system: [o]
Clock/timezone setup: [o]
User/password setup: [o]
Install tasks: [o]
Install boot loader: [o]
Overall install: [o]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
The timezone configuration does a good job of guessing!
At tasksel I unticked everything except 'standard system'.
I think pciutils should be added as part of the standard system,
it was annoying to have to install it when the installer uses it.
# /etc/init.d/exim4 status
checking separate queue runner daemon...done (not running).
checking combined SMTP listener and queue runner daemon...done (running).
I was not asked to configure the mail system, but exim4 was installed with
the 'local delivery' configuration. Shouldn't the installer mention this?
Perhaps I missed the message.
It looks pretty good otherwise.
Bug: exim4 auto-configuration assumes short hostnames
-----------------------------------------------------
When prompted for the hostname by the installer I gave a fully-qualified
hostname. This was propagated to /etc/mailname without stripping the
domain name, with the result that the domain name appears TWICE in
/etc/mailname. That is:
# cat /etc/mailname
<newhost>.<mydomain>.<mydomain>
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to [EMAIL PROTECTED]
# (lspci -n; lspci ) sort -n
00:00.0 0600: 8086:3590 (rev 09)
00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 09)
00:02.0 0604: 8086:3595 (rev 09)
00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev
09)
00:04.0 0604: 8086:3597 (rev 09)
00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 09)
00:05.0 0604: 8086:3598 (rev 09)
00:05.0 PCI bridge: Intel Corporation E7520 PCI Express Port B1 (rev 09)
00:06.0 0604: 8086:3599 (rev 09)
00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 09)
00:1d.0 0c03: 8086:24d2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #1 (rev 02)
00:1d.1 0c03: 8086:24d4 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #2 (rev 02)
00:1d.2 0c03: 8086:24d7 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Controller #3 (rev 02)
00:1d.7 0c03: 8086:24dd (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Controller (rev 02)
00:1e.0 0604: 8086:244e (rev c2)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 0601: 8086:24d0 (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface
Bridge (rev 02)
00:1f.1 0101: 8086:24db (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
(rev 02)
01:00.0 0604: 8086:0330 (rev 06)
01:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (A-Segment
Bridge) (rev 06)
01:00.2 0604: 8086:0332 (rev 06)
01:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (B-Segment
Bridge) (rev 06)
02:05.0 0100: 1000:0030 (rev 08)
02:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 08)
03:0b.0 0c04: 1000:0626 (rev 81)
03:0b.0 Fibre Channel: LSI Logic / Symbios Logic FC929X Fibre Channel Adapter
(rev 81)
03:0b.1 0c04: 1000:0626 (rev 81)
03:0b.1 Fibre Channel: LSI Logic / Symbios Logic FC929X Fibre Channel Adapter
(rev 81)
05:00.0 0604: 8086:0329 (rev 09)
05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev
09)
05:00.2 0604: 8086:032a (rev 09)
05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev
09)
06:07.0 0200: 8086:1076 (rev 05)
06:07.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet
Controller (rev 05)
07:08.0 0200: 8086:1076 (rev 05)
07:08.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet
Controller (rev 05)
09:0d.0 0300: 1002:5159
09:0d.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon
7000/VE]
# lsmod
Module Size Used by
button 6544 0
ac 4836 0
battery 9188 0
dm_snapshot 16032 0
dm_mirror 18928 0
dm_mod 50424 2 dm_snapshot,dm_mirror
loop 14888 0
tsdev 7392 0
mousedev 10788 0
psmouse 34600 0
sg 30972 0
hw_random 5624 0
serio_raw 6596 0
evdev 9088 0
floppy 54276 0
e752x_edac 10244 0
edac_mc 12964 1 e752x_edac
8250_pnp 8704 0
pcspkr 3040 0
shpchp 34272 0
pci_hotplug 27196 1 shpchp
rtc 12340 0
ext3 118568 5
jbd 50292 1 ext3
mbcache 8324 1 ext3
ide_cd 35680 0
cdrom 32448 1 ide_cd
piix 9476 0 [permanent]
sd_mod 18592 7
ehci_hcd 28040 0
uhci_hcd 20424 0
generic 4420 0 [permanent]
ide_core 111016 3 ide_cd,piix,generic
usbcore 111616 3 ehci_hcd,uhci_hcd
e1000 100248 0
mptspi 16236 6
scsi_transport_spi 22176 1 mptspi
mptfc 12872 0
mptscsih 21504 2 mptspi,mptfc
mptbase 46208 3 mptspi,mptfc,mptscsih
scsi_transport_fc 28352 1 mptfc
scsi_mod 123080 7
sg,sd_mod,mptspi,scsi_transport_spi,mptfc,mptscsih,scsi_transport_fc
thermal 12904 0
processor 25512 1 thermal
fan 4516 0
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
