Package: installation-reports
INSTALL REPORT
Debian-installer-version: 14 Mar 2005
uname -a: Linux bob 2.4.27-2-586tsc #1 Thu Jan 20
10:47:31 JST 2005
i586 GNU/Linux
Date: 14 Mar 2005 11:00
Method: Installed HDD into laptop, installed from 1.44M
floppy images
then installed via PCMCIA network through debian.goldweb.com.au/debian,
not proxied. After initial install complete moved HDD into target laptop
as target laptop didn't have enough ram for the installer (only 16M).
Machine: IBM Thinkpad 380XD
Processor: Intel Pentium 200Mhz MMX
Memory: 64MB
Root Device: IDE
Root Size/partition table:
hda1 = swap 256MB
hda2 = linux 3.8GB
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: OPTi Inc. 82C557 [Viper-M] (rev 14)
0000:00:01.0 ISA bridge: OPTi Inc. 82C558 [Viper-M ISA+IDE] (rev 02)
0000:00:02.0 VGA compatible controller: Cirrus Logic GD 7548
0000:00:14.0 IDE interface: OPTi Inc. 82C621 [Viper-M/N+] (rev 12)
0000:00:00.0 0600: 1045:c557 (rev 14)
0000:00:01.0 0601: 1045:c558 (rev 02)
0000:00:02.0 0300: 1013:0038
0000:00:14.0 0101: 1045:c621 (rev 12)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [E]
Was not using CD but installer forced detection
Load installer modules: [E]
IDE driver is on FDD marked as cd-drivers.img
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
The IDE drivers are on the fdd image marked as cd-drivers, this disk
should be marked as ide-drivers or somthing more generic. Once loaded
drivers from cd-drivers for the IDE the installer still expects to find
a debian CD, this should be optional, I had to force the installer to
continue without the CD.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
