Package: smartmontools
Version: 5.36-5bpo1
Severity: minor

Drive info (-i):
        smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce 
Allen
        Home page is http://smartmontools.sourceforge.net/

        === START OF INFORMATION SECTION ===
        Device Model:     SAMSUNG SP2504C
        Serial Number:    S09QJ1JL3-----
        Firmware Version: VT100-33
        User Capacity:    250,059,350,016 bytes
        Device is:        In smartctl database [for details use: -P show]
        ATA Version is:   7
        ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 4a
        Local Time is:    Wed Aug  2 22:58:16 2006 EDT
        SMART support is: Available - device has SMART capability.
        SMART support is: Enabled


The database says that attribute nine is half-minutes. However, it is
actually hours as the -v 9,raw48 -A output below shows:
        smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce 
Allen
        Home page is http://smartmontools.sourceforge.net/

        === START OF READ SMART DATA SECTION ===
        SMART Attributes Data Structure revision number: 16
        Vendor Specific SMART Attributes with Thresholds:
        ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      
UPDATED  WHEN_FAILED RAW_VALUE
          1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  
Always       -       8
          3 Spin_Up_Time            0x0007   100   100   025    Pre-fail  
Always       -       5888
          4 Start_Stop_Count        0x0032   100   100   000    Old_age   
Always       -       4
          5 Reallocated_Sector_Ct   0x0033   253   253   010    Pre-fail  
Always       -       0
          7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  
Always       -       0
          8 Seek_Time_Performance   0x0025   253   253   015    Pre-fail  
Offline      -       0
          9 Power_On_Hours          0x0032   253   253   000    Old_age   
Always       -       194
         10 Spin_Retry_Count        0x0033   253   253   051    Pre-fail  
Always       -       0
         11 Calibration_Retry_Count 0x0012   253   002   000    Old_age   
Always       -       0
         12 Power_Cycle_Count       0x0032   100   100   000    Old_age   
Always       -       4
        190 Unknown_Attribute       0x0022   142   127   000    Old_age   
Always       -       32
        194 Temperature_Celsius     0x0022   142   127   000    Old_age   
Always       -       32
        195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   
Always       -       588891703
        196 Reallocated_Event_Count 0x0032   253   253   000    Old_age   
Always       -       0
        197 Current_Pending_Sector  0x0012   253   253   000    Old_age   
Always       -       0
        198 Offline_Uncorrectable   0x0030   253   253   000    Old_age   
Offline      -       0
        199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   
Always       -       0
        200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   
Always       -       0
        201 Soft_Read_Error_Rate    0x000a   100   100   000    Old_age   
Always       -       0
        202 TA_Increase_Count       0x0032   253   253   000    Old_age   
Always       -       0


And here is the self-test log. Self tests are run every twenty-four
hours, as you can see. The "194" is clearly hours, then (the last self
test was run last night):
        SMART Self-test log structure revision number 1
        Num  Test_Description    Status                  Remaining  
LifeTime(hours)  LBA_of_first_error
        # 1  Extended offline    Completed without error       00%       175    
     -
        # 2  Extended offline    Completed without error       00%       151    
     -
        # 3  Extended offline    Completed without error       00%       127    
     -
        # 4  Extended offline    Completed without error       00%       103    
     -
        # 5  Extended offline    Completed without error       00%         0    
     -
        # 6  Short offline       Completed without error       00%         0    
     -



-- Package-specific info:
Ouput of /usr/share/bug/smartmontools:
# CONFIG_IDE_TASK_IOCTL is not set

-- System Information:
Debian Release: 3.1
  APT prefers unstable
  APT policy: (300, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.17-1-k7
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages smartmontools depends on:
ii  debianutils           2.8.4              Miscellaneous utilities specific t
ii  libc6                 2.3.2.ds1-22sarge3 GNU C Library: Shared libraries an

-- no debconf information


-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to