Package: kernel-image-2.6.10-1-686 Version: 2.6.10-4 Severity: important File: usb-storage
I have upgraded to 2.6.10-1-686 from 2.6.9-1-686 because wifi stopped working with it. However as I begun to use 2.6.10-1-686, I found out that I can no longer use my usb disk LaCie Big Disk 250GB, which is however working perfectly with 2.6.9-1-686. When I connect the drive, the system recognizes it correctly: Mar 5 14:54:08 localhost kernel: usb 3-2: new full speed USB device using uhci_hcd and address 3 Mar 5 14:54:16 localhost kernel: usb 1-4: new high speed USB device using ehci_hcd and address 8 Mar 5 14:54:16 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices Mar 5 14:54:17 localhost usb.agent[16477]: usb-storage: already loaded Mar 5 14:54:21 localhost kernel: Vendor: WDC WD25 Model: 00JB-22FUA0 Rev: 15.0 Mar 5 14:54:21 localhost kernel: Type: Direct-Access ANSI SCSI revision: 04 Mar 5 14:54:21 localhost kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) Mar 5 14:54:21 localhost kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) Mar 5 14:54:21 localhost kernel: /dev/scsi/host1/bus0/target0/lun0: p1 Mar 5 14:54:21 localhost kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Mar 5 14:54:21 localhost scsi.agent[16516]: disk at /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/host1/target1:0:0/1:0:0:0 However when I try to access it (using device mapper, because it is all encrypted), the following errors appear in /var/log/messages: Mar 5 14:55:37 localhost kernel: usb 1-4: reset high speed USB device using ehci_hcd and address 8 Mar 5 14:55:38 localhost kernel: usb 1-4: scsi_eh_1 timed out on ep0in Mar 5 14:55:44 localhost kernel: usb 1-4: scsi_eh_1 timed out on ep0in Mar 5 14:55:44 localhost kernel: usb 1-4: reset high speed USB device using ehci_hcd and address 8 Mar 5 14:55:45 localhost kernel: usb 1-4: scsi_eh_1 timed out on ep0in Mar 5 14:55:50 localhost kernel: usb 1-4: scsi_eh_1 timed out on ep0in Mar 5 14:55:50 localhost kernel: scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0 Mar 5 14:55:50 localhost kernel: usb 1-4: USB disconnect, address 8 Mar 5 14:55:50 localhost kernel: usb 1-4: new high speed USB device using ehci_hcd and address 9 Mar 5 14:55:51 localhost kernel: usb 1-4: khubd timed out on ep0in Mar 5 14:55:56 localhost kernel: usb 1-4: khubd timed out on ep0in Mar 5 14:55:56 localhost kernel: usb 1-4: new high speed USB device using ehci_hcd and address 10 Mar 5 14:55:57 localhost kernel: usb 1-4: khubd timed out on ep0in Mar 5 14:56:03 localhost kernel: usb 1-4: khubd timed out on ep0in Thanks for any help. Hanus Adler -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.10-1-686 Locale: LANG=cs_CZ, LC_CTYPE=cs_CZ (charmap=ISO-8859-2) Versions of packages kernel-image-2.6.10-1-686 depends on: ii coreutils [fileutils] 5.2.1-2 The GNU core utilities ii initrd-tools 0.1.77 tools to create initrd image for p ii module-init-tools 3.2-pre1-2 tools for managing Linux kernel mo -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
